-------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 콘트롤 - ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
//---List Box / file Dir Dlg--------------------------------------------------------
//----------------------------------------------------------------------------
// 폴더 얻기
char szTemp[255];
memset(szTemp, 0, 255);
lstrcat(szTemp, "c:\\Data");
CDialog::DlgDirList(szTemp, IDC_LISTBOX, NULL, DDL_EXCLUSIVE | DDL_DIRECTORY);
//----------------------------------------------------------------------------
//----------------------------------------------------------------------------
//화일명 얻기
CString Path_Log="C:\\WaterSensor성능검사기\\Data\\";
CString ss=""; CString tt="";
tt="*.mdb";
ss =Path_Log+"*.mdb";
char szTemp[255];
memset(szTemp, 0, 255);
lstrcat(szTemp, ss);
CDialog::DlgDirList(szTemp, IDC_SLOG_LIST, NULL, NULL);// DDL_EXCLUSIVE | DDL_DIRECTORY);
int nList=0; CString csTmp="";
sLog.SetCurSel(nList);
/*
if(sLog.GetTextLen(nList)>0)
{
sLog.GetText(nList ,csTmp);
if( FileExists(Path_Log+csTmp))
{
ss=LoadReadFile(Path_Log+csTmp);
LogDisplay(ss);
}
}
*/
//==============================================================================
//---다른 Label 콘트롤(Threed32 Panel) Control 상속 얻기 -----------------------
#include "sspnctrl.h"
CSSPNCtrl *Static;
Static = (CSSPNCtrl *)GetDlgItem(IDC_IO_0);
Static->SetBackColor(0x0000ff); //BGR
void CAttachMachineView::Sub_SetDlgItemColor(int nID, COLORREF CColor)
{
CSSPNCtrl *Static;
Static = (CSSPNCtrl *)GetDlgItem(IDC_IO_0);
Static->SetBackColor(CColor);
}
CSSPNCtrl *Static;
Static = (CSSPNCtrl *)GetDlgItem(IDC_EXIT_WAITE_MESSAGE);
Static->ShowWindow(true);
#include "LabelControl.h"
((CLabelControl*)GetDlgItem(nID))->SetBackColor(OK_COLOR);
//---Control 상속 보이기--------------------------------------------------------
CButton *pBtn;
pBtn = (CButton *)GetDlgItem(IDC_CLOSE_BTN);
pBtn->ShowWindow(true);
Static = (CStatic *)GetDlgItem(IDC_CAM_NAME);
Static->ShowWindow(true);
//---Control 이벤트--------------------------------------------------------
.h
//{{AFX_MSG(CImageViewView)
afx_msg bool OnClickImageView(UINT nID);
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
.cpp
BEGIN_MESSAGE_MAP(CImageViewView, CFormView)
//{{AFX_MSG_MAP(CImageViewView)
ON_COMMAND_RANGE(IDC_IMG_VIEW1, IDC_IMG_VIEW4, OnClickImageView)
END_MESSAGE_MAP()
bool CImageViewView::OnClickImageView(UINT nID)
{
CString csTmp;
csTmp.Format("%d",nID);
AfxMessageBox(csTmp);
return true;
}
#define OK_COLOR RGB(100,150,255)
#define NG_COLOR RGB(235,60,60)
COLORREF clLime;
//--Inage List
BOOL bRetValue = FALSE;
HICON hIcon = NULL;
// m_CurLibType = m_SelLibrary = m_SleLibType = LINE2RECT;
SetIcon(m_hIcon, TRUE);
SetIcon(m_hIcon, FALSE);
// Create image list
bRetValue = m_ImageList.Create(80, 80, ILC_COLOR32 | ILC_MASK, 5, 1);
ASSERT(bRetValue == TRUE);
// Add some icons
hIcon = AfxGetApp()->LoadIcon(IDI_ICON_MARK);
m_ImageList.Add(hIcon);
m_lbxListBox.SetImageList(&m_ImageList);
//--CShadeButton------------------------------------------------------
#include "ShadeButtonST.h"
.h --
CShadeButtonST m_btnXYOrg;
..cpp
DDX_Control(pDX,IDC_BTN_XYORG,m_btnXYOrg); //IDC_BTN_XYORG 푸시 버튼
..OnInitDialog()
//COLORREF crBtnColor;
//crBtnColor = ::GetSysColor(COLOR_ACTIVEBORDER) + RGB(100, 50, 50);
m_btnXYOrg.SetShade(CShadeButtonST::SHS_HBUMP);
//-------
m_btnXYOrg.SetShade(CShadeButtonST::SHS_HSHADE);
m_btnXYOrg.Invalidate();
m_btnXYOrg.SetShade(CShadeButtonST::SHS_HSHADE,8,10,30,RGB(100,55,0));
//--CLabelControl--------------------------------------------------
CLabelControl *pLabel;
for(int i=0; i<MAX_ONE_BD-2; i++)//0-5 Label1 - Label6
{
pLabel = (CLabelControl *)GetDlgItem(IDC_LABEL1+i);
pLabel->SetEnabled(FALSE);
}
//Label7 ID가 순서대로가 아님
pLabel = (CLabelControl *)GetDlgItem(IDC_LABEL7);
pLabel->SetEnabled(FALSE);
CComboBox *pcbo;
pcbo = (CComboBox *)GetDlgItem(IDC_COMBO_SELECT_AXIS);
m_SelectAxisNo = pcbo->SetCurSel(0);
pcbo = (CComboBox *)GetDlgItem(IDC_COMBO_SELECT_MODE);
m_SelectAxisMode= pcbo->SetCurSel(0);
pcbo->EnableWindow(false);
CStatic *Static;
Static = (CStatic *)GetDlgItem(IDC_STATIC_AXIS_MODE);
Static->EnableWindow(false);//Static->ShowWindow(false);
CButton *pchk;
pchk = (CButton *)GetDlgItem(IDC_RADIO_MMCBOARD1);
pchk->SetCheck(TRUE);
// Axis One Select LED Status
m_ledOpSelect1.SetValue(false); m_ledOpSelect2.SetValue(false);m_ledOpSelect3.SetValue(true);
/*------Combo Box---------------------------------------------------*/
CComboBox *pcbo2;
pcbo2 = (CComboBox *)GetDlgItem(IDC_COMBO_SELECT_MODE);
m_SelectAxisMode = pcbo2->SetCurSel(0);
/*------이벤트 얻기---------------------------------------------------*/
BOOL CManualMotorPage::PreTranslateMessage(MSG* pMsg)
{
// TODO: Add your specialized code here and/or call the base class
int ret;
CLabelControl *plbl;
if(pMsg->message == WM_LBUTTONDOWN){
for(int i=0;i<MAX_AXIS;i++){
plbl = (CLabelControl *)GetDlgItem(IDC_LBL_AXIS_X+i);
if(pMsg->hwnd == plbl->m_hWnd){
return TRUE;
}
}
}
}
return CPropertyPage::PreTranslateMessage(pMsg);
}
/*------Icon---------------------------------------------------*/
HICON m_hIconOnOff[2];
m_hIconOnOff[0] = AfxGetApp()->LoadIcon(IDI_OFF);
m_hIconOnOff[1] = AfxGetApp()->LoadIcon(IDI_ON);
CStatic *icon;
icon = (CStatic *)GetDlgItem(IDC_PIC_LED1);
icon->SetIcon(m_hIconOnOff[0]);
/*------Button Enable-----------------------------------------------------*/
CButton *opBtn;
opBtn=(CButton *)GetDlgItem(IDC_BTN_START);
opBtn->EnableWindow(FALSE);
CCommandButton *origBtn;
origBtn=(CCommandButton *)GetDlgItem(IDC_CMD_ORIG_START);
origBtn->SetEnabled(FALSE);
/*------Microsoft Form2.0 Check Box Set------------------------------------*/
// void SetValue(VARIANT* newValue);
void SetValue( BOOL newValue);
// VARIANT GetValue();
BOOL GetValue();
void CMdcCheckBox::SetValue(BOOL newValue)
{
static BYTE parms[] =
VTS_BOOL;
InvokeHelper(0x0, DISPATCH_PROPERTYPUT, VT_EMPTY, NULL, parms,
newValue);
}
BOOL CMdcCheckBox::GetValue()
{
BOOL result;
InvokeHelper(0x0, DISPATCH_PROPERTYGET, VT_BOOL, (void*)&result, NULL);
return result;
}
CMdcCheckBox *pchk;
pchk = (CMdcCheckBox *)GetDlgItem(IDC_CHECKBOX1);
pchk->SetValue(true);
CMdcCheckBox *pchk;
pchk = (CMdcCheckBox *)GetDlgItem(IDC_CHECKBOX1);
if(pchk->GetValue())AfxMessageBox("on");
else AfxMessageBox("off");
/*------Radio Button Set---------------------------------------------------*/
CButton *pchk;
pchk = (CButton *)GetDlgItem(IDC_RADIO_NONE);
pchk->SetCheck(FALSE);
pchk = (CButton *)GetDlgItem(IDC_RADIO_SPLIT);
pchk->SetCheck(TRUE);
/*------------------------------------------------------------------------*/
/*------어레이 이벤트 발생 설정 ------------------------------------------*/
..h
protected:
//}}AFX_MSG
afx_msg void OnChangeTray(UINT nID);
DECLARE_MESSAGE_MAP()
..cpp
BEGIN_MESSAGE_MAP(CPreMountDataPage, CPropertyPage)
//}}AFX_MSG_MAP
ON_COMMAND_RANGE(IDC_RADIO_TRAY1, IDC_RADIO_TRAY4, OnChangeTray)
END_MESSAGE_MAP()
void CPreMountDataPage::OnChangeTray( UINT nID )
{
CLabelControl *label;
UpdateData(TRUE);
m_nTrayNo = nID - IDC_RADIO_TRAY1;
}
/*------Gride Scroll-----------------------------------------------------*/
m_MSFlexGrid.SetScrollTrack(true);
/*------Icon 불러오기-----------------------------------------------------*/
IDC_PIC_LED1 : Picture Properties, Type -Icon
HICON m_hIconOnOff[2];
m_hIconOnOff[0] = AfxGetApp()->LoadIcon(IDI_OFF);
m_hIconOnOff[1] = AfxGetApp()->LoadIcon(IDI_ON);
CStatic *icon;
for(int i=0; i<9; i++) {
icon = (CStatic *)GetDlgItem(IDC_PIC_LED1 + i);
icon->SetIcon(m_hIconOnOff[0]);
}
/*------다중 콘트롤 ID 지정 및 얻기----------------------------------------*/
DeviceCheckView.h 화일
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
afx_msg void OnChangeIoNo( UINT nID );
//-----
DeviceCheckView.cpp 화일
void CDeviceCheckView::DoDataExchange(CDataExchange* pDX)
{
CFormView::DoDataExchange(pDX);
//{{AFX_DATA_MAP(CDeviceCheckView)
DDX_Radio(pDX, IDC_IONO1, m_nioNo);
//}}AFX_DATA_MAP
}
BEGIN_MESSAGE_MAP(CDeviceCheckView, CFormView)
//{{AFX_MSG_MAP(CDeviceCheckView)
ON_WM_TIMER()
//}}AFX_MSG_MAP
ON_COMMAND_RANGE(IDC_IONO1, IDC_IONO6, OnChangeIoNo)
END_MESSAGE_MAP()
void CDeviceCheckView::OnChangeIoNo( UINT nID )
{
m_nioNo = nID - IDC_IONO1;
}
/*------콘트롤 ID 지정 및 얻기---------------------------------------------*/
//--------------------------------------------------------------------------
ON_EVENT(CIODisplay, IDC_OUT_T0, -600 /* Click */, OnClickOutBtn, VTS_NONE)
ON_EVENT(CIODisplay, IDC_OUT_T1, -600 /* Click */, OnClickOutBtn, VTS_NONE)
ON_EVENT(CIODisplay, IDC_OUT_T2, -600 /* Click */, OnClickOutBtn, VTS_NONE)
void CIODisplay::OnClickOutBtn()
{
int id = GetFocus()->GetDlgCtrlID() - IDC_OUT_T0;
}
//--------------------------------------------------------------------------
/*------상속받아 콘트롤변수지정---------------------------------------------*/
#include "xShadeButton.h"
#include "SXButton.h"
DDX_Control(pDX, IDC_ESTOP, m_EStop);
m_EStop.SetIcon( IDI_ESTOP, 32, 32 );
m_EStop.SetImagePos( CPoint ( 2, SXBUTTON_CENTER ) );
m_EStop.SetTextPos( CPoint ( 28, SXBUTTON_CENTER ) );
m_EStop.SetFont(&m_sFont);
/*------상속받아 콘트롤 설정 ---------------------------------------------*/
#include "EditEx.h"
CEditEx m_CmdPos[2];
m_CmdPos[0].SubclassDlgItem(IDC_CMD_POS0, this);
m_CmdPos[0].bkColor( BLACK );
m_CmdPos[0].textColor( YELLOW );
m_CmdPos[0].setFont( 10, FW_ULTRABOLD, DEFAULT_PITCH | FF_DONTCARE, _T("궁서"));
m_CmdPos[0].SetWindowText("0.000");
SetDlgItemDouble(IDC_CMD_POS0, cmd_pos[0]);
// 지정한 컨트롤에 값을 보여준다.
void CCAMCFS20Dlg::SetDlgItemDouble(int nID, double value)
{
CString sTemp;
sTemp.Format("%.3f", value);
GetDlgItem(nID)->SetWindowText(sTemp);
}
// 지정한 컨트롤에서 값을 읽어온다.
double CCAMCFS20Dlg::GetDlgItemDouble(int nID)
{
double dRet;
CString sTemp;
GetDlgItem(nID)->GetWindowText(sTemp);
dRet = atof((LPCTSTR)sTemp);
return dRet;
}
/*------EnableWindow--------------------------------------------------------*/
EnableWindow(GetDlgItem(m_hDlg,IDC_BTN_START),FALSE);
EnableWindow(GetDlgItem(m_hDlg,IDC_BTN_STOP),TRUE);
char szBuf[256];
SetDlgItemText(m_hDlg, IDC_MSG, "Server Running");
GetDlgItemText(m_hDlg,IDC_LISTEN_EDIT,szBuf,256);
int iPort = atoi(szBuf);
memset(szBuf,0,256);
/*------EDIT CONTROL--------------------------------------------------------*/
void CWinDlg::WriteText(char* szData)
{
HWND hWndOutput;
int iChar;
hWndOutput = GetDlgItem(m_hDlg, IDC_EDIT_BOARD);
iChar = SendMessage(hWndOutput, EM_GETLIMITTEXT, 0, 0);
SendMessage(hWndOutput, EM_SETSEL, iChar, iChar);
SendMessage(hWndOutput, EM_REPLACESEL, FALSE, (LPARAM)szData);
SendMessage(hWndOutput, EM_REPLACESEL, FALSE, (LPARAM)"\r\n");
}
/*------Control Key--------------------------------------------------------*/
#define VK_NUMLOCK 0x90
#define VK_SCROLL 0x91
KeyCode=GetKeyState(VK_CONTROL);
if((KeyCode==CONTROLKEY1)||(KeyCode==CONTROLKEY2)){bConKey=TRUE;}
/*------Read Only----------------------------------------------------------*/
m_FileSaveAsButton[nCh].EnableWindow(FALSE);
m_ItemSelectCombo[nCh].EnableWindow(nMode);
m_SetRevCheckBox[nCh].EnableWindow(nMode);
m_TestViasstatic[nCh].SetReadOnly(nMode);
/*------Slider------------------------------------------------------------*/
m_SpotTopSlider.GetPos();//일반
// m_SpotLeftSlider.SetRange(0, 1024);//일반
m_SpotLeftSlider.SetValue(140); //NI 콘트롤
void CGraphResultPage3::OnPointerValueChangedSpotBottomSlider(long Pointer, VARIANT FAR* Value)
{
// TODO: Add your control notification handler code here
int nData=0;
nData = CNiVariant(Value);m_nSpotBottomLimit=nData;
}
/*------Message------------------------------------------------------------*/
// MessageBox(NULL,buf,title,MB_OK|MB_ICONEXCLAMATION);
// if (MessageBox("Module Aging Program Quit? ", " OLED Module Aging Program",
// /*MB_ICONQUESTION*/MB_ICONSTOP | MB_OKCANCEL) == IDOK) {
// OnClose();
// PostQuitMessage(0);
// }
RedrawWindow();//Invalidate(FALSE);
/*------ 콘트롤 Bmp-------------------------------------------------------------------*/
CBitmap m_ButtonBmp1;
m_ButtonBmp1.LoadBitmap(IDB_SAVEBUTTONBMP);
m_FileSaveAsButton[0].SetBitmap(m_ButtonBmp1);
RedrawWindow();//Invalidate(FALSE);
/*------ 콘트롤 Enable----------------------------------------------------------------*/
m_ccEdit1.SetReadOnly(TRUE);
m_ccButton1.EnableWindow(TRUE);
m_ccModeCheck1.ShowWindow(SW_SHOW);
m_ccModeCheck2.ShowWindow(SW_HIDE);
/*------------------------------------------------------------------------------------*/
/*------CT 콘트롤 제어----------------------------------------------------------------*/
m_cttPosition11.SetBackColor(RGB(255,0,0));
m_cttPosition11.SetForeColor(RGB(255,0,0));
m_cttPosition11.SetCaption("-120.000");
m_cttPosition11.ShowWindow(FALSE);
/*------NI 콘트롤 숨김----------------------------------------------------------------*/
m_nctlTestButton1.ShowWindow(FALSE);//숨김
/*------NI Graph----------------------------------------------------------------*/
m_ResultLineGraph1.GetAxes().Item(3.0).GetTicks().SetMajorTickColor(White);
m_ResultLineGraph1.GetPlots().Item(2.0).SetLineColor(White);
m_ResultLineGraph1.GetAxes().Item(1).GetLabels().SetColor(White);
m_ResultLineGraph1.GetAxes().Item(1).AutoScaleNow();
m_ResultLineGraph1.GetAxes().Item(2).AutoScaleNow();
m_ResultLineGraph1.GetAxes().Item(1).SetMinMax(m_GraphScaleMin_x,m_GraphScaleMax_x);
m_ResultLineGraph1.GetAxes().Item(2).SetMinMax(m_GraphScaleMin_y,m_GraphScaleMax_y);
//==================================================================================
/*------DlgList [..][]------------------------------------------------------------*/
char szTemp[255];
memset(szTemp, 0, 255);
lstrcat(szTemp, "c:\\Data");
CDialog::DlgDirList(szTemp, IDC_LISTBOX, NULL, DDL_EXCLUSIVE | DDL_DIRECTORY);
/*----------------------------------List Box Text 얻기----------------------------*/
//=================================================================================
CString strTmp="";
int nListNo=m_ccName.GetCurSel();
if(m_ccName.GetTextLen(nListNo)>0)
{
m_ccName.GetText(nListNo,strTmp);
}
m_ccModuleMeasureList.InsertString(nListNo,csFind);
nListNo=m_ccImageList.GetCurSel();
CString csFind;m_ccImageList.GetText(nListNo,csFind);
nListNo=m_ccModuleMeasureList.GetCurSel();
m_ccModuleMeasureList.DeleteString(nListNo);
m_ccModuleMeasureList.InsertString(nListNo,csFind);
int nListMax=flBox.GetCount();
csTmp.Format("%d",nListMax); AfxMessageBox(csTmp);
//==================================================================================
/*----------------------------------Multi Edit 한줄씩 얻기----------------------------*/
CString ReadData; CString strTmp="";
GetDlgItemText(IDC_INSTRUCT_EDIT, ReadData);
int index=0; int length=0;
char chBuf[2];
length = ReadData.GetLength();
int nListCount=0;
CString csLineData[CHMAX];
CString csBuf=_T("");
for(int i=0; i<length; i++)
{
csBuf=ReadData.Mid(i,1);
if(csBuf=="\n")
{
csBuf="";
nListCount++;
}
else
{
if(csBuf!="\r")
{
chBuf[0]=csBuf.GetAt(0);
chBuf[1]='\0';
csLineData[nListCount]+=chBuf;
}
}
}
for(int n=0; n<nListCount+1; n++)
AfxMessageBox(csLineData[n]);
/*----------------------------------콘트롤 생성-------------------------------------*/
// CComboBox m_pComboBox[CHMAX];
// CEdit m_pEditBox[CHMAX];
// CListBox m_pListBox[CHMAX];
// CButton m_pButton[CHMAX];
WS_THICKFRAME 콘트롤 크기 가변
RECT ovlScrRect;
m_Display.GetWindowRect(&ovlScrRect);
::CopyRect(&OverlayClientRect,&ovlScrRect);
ScreenToClient(&OverlayClientRect);
pVision->OutputOverlay(GetDC()->m_hDC,&ovlScrRect);
UpdateOverlayWindow();
/* CStatic *m_static;
m_static = new CStatic;
m_static->Create(_T("스태틱"),
WS_VISIBLE | SS_CENTER,
CRect(10,10,210,40),
this,
ID_SAMPLE_STATIC1);
*/
//리스트 박스 만들기
RECT rect1={10,100,200,200};
m_pListBox.Create(WS_CHILD | WS_VISIBLE | LBS_STANDARD,rect1,this,200);
m_pListBox.ShowWindow(SW_SHOW);
//데이터 삽입
m_pListBox.AddString("data1");
m_pListBox.AddString("data2");
m_pListBox.AddString("data3");
//에디터 박스 만들기
RECT rect2={210,10,400,100};
m_pEditBox.Create(
WS_CHILD | WS_VISIBLE |
ES_MULTILINE //여러 라인 입력
| ES_AUTOHSCROLL | ES_AUTOVSCROLL| //자동 수직,수평 스크롤
WS_BORDER |WS_VSCROLL,//외곽선과 수직 수크롤바 설정
rect2,this,300);
m_pEditBox.ShowWindow(SW_SHOW);
//콤보박스 만들기
RECT rect3={210,200,400,300};//콤보박스 출력 위치
//윈도우 만들기
m_pComboBox.Create(WS_CHILD | WS_VISIBLE|CBS_DROPDOWN ,rect3,this,400);
m_pComboBox.ShowWindow(SW_SHOW);
//콤보박스에 데이터를 넣는다.
m_pComboBox.AddString("cdata1");
m_pComboBox.AddString("cdata2");
m_pComboBox.AddString("cdata3");
/*------KeyBoadData------------------------------------------------------------------*/
void CTESTView::OnChar(UINT nChar, UINT nRepCnt, UINT nFlags)
{
// TODO: Add your message handler code here and/or call default
CString csText=_T("");
csText=nChar;
AfxMessageBox(csText);
CFormView::OnChar(nChar, nRepCnt, nFlags);
}
/*------SendDlgItemMessage------------------------------------------------------------*/
SendDlgItemMessage(IDC_STATIC_WLREM, WM_SETTEXT,0,(LPARAM)(LPSTR)"DATA NONE");
/*-------라디오버튼-------Radio button------------------------------------------------*/
//-------------------------------------------------------------------------------------
tmModel.PCBType = (rbSata.GetCheck()?0:1);
tmModel.Rotate = (rbRetn.GetCheck()?false:true);
tmModel.ScrewCheck = (rbNChk.GetCheck()?false:true);
tmModel.ScrewType = (rbTyp1.GetCheck()?0:1);
m_Select11.SetCheck(TRUE);
m_Select11.SetCheck(FALSE);
m_ccModeCheck3.SetWindowText("Photo(uA)");
radio button
변수 생성시 Gruop 지정
0 : on
-1 : off
CNiPlot3D::PlotStyles style=m_Graph3D.GetPlots().Item(1).GetStyle();
m_Point.SetCheck((style == CNiPlot3D::PlotStyles::Point)? 1 : 0);
m_Line.SetCheck((style == CNiPlot3D::PlotStyles::Line)? 1 : 0);
m_LinePoint.SetCheck((style == CNiPlot3D::PlotStyles::LinePoint)? 1 : 0);
/*------------List Box 변수 선언 대입------------------------------------------------*/
CListBox m_ListBox[4];
m_ListBox[0].SubclassDlgItem(IDC_LIST1, this);
m_ListBox[1].SubclassDlgItem(IDC_LIST2, this);
m_ListBox[2].SubclassDlgItem(IDC_LIST3, this);
m_ListBox[3].SubclassDlgItem(IDC_LIST4, this);
m_ListBox[i].EnableWindow(FALSE);
m_ListBox[port-1].AddString(m_strReceived[port-1]);
m_ListBox[port-1].SetSel(m_ListBox[port-1].GetCount()-1, TRUE);
m_ListBox[0].ResetContent();//clear
m_ccModuleMeasureList.InsertString(nListNo,csFind);
//---List Control 빈문자 에러방지---------------------------------------------------
if(m_ccName.GetCount()>0)
{
m_ccName.SetCurSel(m_nListCurrentNo);
if(m_ccName.GetTextLen(m_ccName.GetCurSel())>0)
{
m_ccName.GetText(m_ccName.GetCurSel(),strTmp);
m_csName=strTmp;
}
else
{
m_csName=_T("");
}
strTmp.Format("%d / %d", m_nListCurrentNo, m_nListMaxCount);
SetDlgItemText(IDC_PAGEMODEL, strTmp);
}
// m_ccModule_A_JobList.SetItemHeight(nListMaxCount,LISTHIGH2);//넓게 표시
/*----------------------------Check Box On/Off제어---------------------------------*/
m_ccCheck.SetCheck(TRUE);//ON
m_ccCheck.SetCheck(FALSE);//OFF
/*----------------------------------커서 활성-------------------------------------*/
m_clbName.SetFocus();
/*----------------------------------콘트롤 보이기 숨기기--------------------------*/
m_TestButton.ShowWindow(SW_HIDE);//(FALSE)
m_TestButton.ShowWindow(SW_SHOW);//(TRUE)
/*------------콘트롤 생성--------------------------------------------------------*/
public:
CListBox m_pListBox;
RECT rect={10,100,200,200};
m_pListBox.Create(WS_CHILD|WS_VISIBLE|LBS_STANDARD,rect,this,200);
m_pListBox.ShowWindow(SW_SHOW);
m_pListBox.AddString("data1");
m_pListBox.AddString("data2");
m_pListBox.AddString("data3");
// m_ccName.GetText(m_ccName.GetCurSel(),strTmp);
/*------------콤보BOX Text제어--------------------------------------------------*/
CString csTmp;
int nNo=m_ccPalletSelect.GetCurSel();
m_ccPalletSelect.GetLBText(nNo,csTmp);
AfxMessageBox(csTmp);
for(i=0; i<10; i++)
{
m_ccCombo.DeleteString(i);
csText.Format("%dH:",i);
m_ccCombo.InsertString(i,csText);
}
/*------List Control-------------------------------------------------------------*/
CString csTmp;
m_ccNameList.AddString("DATA 1");
m_ccNameList.SetCurSel(0);
m_ccNameList.GetText(m_ccNameList.GetCurSel(),csTmp);
if(m_cliItemName.GetTextLen(m_cliItemName.GetCurSel())>0)
{
m_cliItemName.GetText(m_cliItemName.GetCurSel(),csTmp);
m_csItemName=csTmp;
}
for(i=m_ccName.GetCount()-1;i>=0;i--)
{m_ccName.DeleteString(i);}
if(m_cliItemName.GetCount()>0)
{
if(m_cliItemName.GetTextLen(m_nCurrentModelNo-1)>0)
{
m_cliItemName.GetText(m_nCurrentModelNo-1,strTmp);
}
SearchModelItemName(strTmp, false);
}
/*--------------------Edit-> 리스트Box로 사용-----------------------------------*/
void CFOOLPROOFView::Status_display(CString sdisplay)
{
//Edit -Control
if ( m_ComDisplay.GetLineCount() > 5)
{
m_ComDisplay.SetSel(0, -1);
m_ComDisplay.Clear();
}
sdisplay+="\r\n";
m_ComDisplay.ReplaceSel(sdisplay);
/*--------------------Edit-> 커서 생성-----------------------------------------*/
m_clbEdit.SetFocus();
}
//-------------Edit->GetWindowText----------------------------------------------------//
//-----------------------------------------------------------------------------------//
//--unsigned char-> CString , unsigned char-> char----------------------------------
int Length= m_ccEdit1.GetWindowTextLength();
unsigned char *temp = NULL;
temp = new unsigned char [Length];
char temp2[2]; CString csText;
m_ccEdit1.GetWindowText((LPSTR)temp,255);
for(int i=0; i<Length; i++)
{
temp2[0]=temp[i]; temp2[1]='\0';
csText+=(LPSTR)temp2;
}
AfxMessageBox(csText);
//----------------------------------------------------
char temp[255];
for(int i=0; i<255; i++) temp[i]='\0';
GetDlgItemText(IDC_EDIT1,(LPSTR)temp,255);
GetDlgItemText(IDC_EDIT1,(char*)temp,255);
CString csText=(LPSTR)temp;
AfxMessageBox(csText);
//-----------------------------------------------------------------------------------//
/*-------------Control에 고유번호 부여 호출-----------------------------------*/
CString Buf;
CString data;
CString BufSET;
int No=1001; /*Resource.h -#define IDC_EDIT 1001 */
int No2=1004;
data="A1입니다";
SetDlgItemText(No,data);
GetDlgItemText(No2,BufSET);
AfxMessageBox(BufSET);
UpdateData(FALSE);
/*----------------콘트롤에서 직접 text 얻기----------------------------------*/
GetDlgItemText(IDC_SELECT_NAME_SCHOOL_YEAR1, csName);
SetDlgItemText(IDC_PAGEMODEL, strText);
//===========================================
CString strRX, strRY;
CStatic *pRX, *pRY;
pRX = (CStatic *)GetDlgItem(IDC_LBL_RESULTX);
pRY = (CStatic *)GetDlgItem(IDC_LBL_RESULTY);
pRX->GetWindowText(strRX);
pRY->GetWindowText(strRY);
/*------------------------FluxGrid 텍스트 중앙위치---------------------------*/
m_GridData.SetCellAlignment(4);
/*-------------------StatusBar, 상태바---------------------------------------*/
void CMainFrame::DisplayMessage(CPoint point)
{
CString msg;
msg.Format("마우스 위치 : (%d, %d)",
point.x, point.y);
m_wndStatusBar.SetWindowText(msg);
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
CRect rc;
pFrame->m_wndStatusBar.GetItemRect (0, rc);
pFrame->m_wndStatusBar.SetWindowText(csMsg);
}
/*-------------------ProgressBar----------------------------------------------*/
// ProgressBar표시를 위한 부분
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
pFrame->m_pProgressBar.SetRange(0, height-tHeight);
pFrame->m_pProgressBar.SetStep(1);
CRect rc;
pFrame->pStatusBar->GetItemRect (0, rc);
pFrame->m_pProgressBar.MoveWindow(&rc);
pFrame->m_pProgressBar.StepIt();
//---------------------------------------------------------------------------*/
void CColorView::OnMouseMove(UINT nFlags, CPoint point)
{
//#include "MainFrm.h"
CMainFrame *pWnd = (CMainFrame*) AfxGetMainWnd();
pWnd->DisplayMessage(point);
CView::OnMouseMove(nFlags, point)
}
/*------------------------------SPIN Button 범위 지정--------------------*/
1-12 까지 범위지정
void CDBdeleteDlg::OnDeltaposMonthStartSpin(NMHDR* pNMHDR, LRESULT* pResult)
{
NM_UPDOWN* pNMUpDown = (NM_UPDOWN*)pNMHDR;
// TODO: Add your control notification handler code here
UpdateData(TRUE);
pNMUpDown->iPos = 0;
m_MonthStartEdit -= (pNMUpDown->iDelta);
if (m_MonthStartEdit<1)
{
m_MonthStartEdit = 1;
}
else if (m_MonthStartEdit>12)
{
m_MonthStartEdit = 1;
}
UpdateData(FALSE);
*pResult = 0;
}
/*------------------------------콘트롤 화면 확장 --------------------*/
void CModel::ExpandyaContract()
{
CRect rcDlg, rcMarker;
GetWindowRect(rcDlg);
if (!m_bExpanded)
{
m_nExpandedWidth = rcDlg.Width();
m_Devide.GetWindowRect(rcMarker);
m_nNormalWidth = (rcMarker.right - rcDlg.left);
rcDlg.SetRect(rcDlg.left, rcDlg.top, rcDlg.left + m_nNormalWidth+12,
rcDlg.top + rcDlg.Height());
HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
while (hWndChild != NULL)
{
hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
::EnableWindow(hWndChild, m_bExpanded);
}
}
else
{
rcDlg.SetRect( rcDlg.left, rcDlg.top, rcDlg.left + + m_nExpandedWidth,
rcDlg.top + rcDlg.Height() );
HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
while (hWndChild != NULL)
{
hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
::EnableWindow(hWndChild, m_bExpanded);
}
}
MoveWindow(rcDlg, TRUE);
m_bExpanded = !m_bExpanded;
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - HDC 얻기 - ////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
CMainFrame *pFrame= (CMainFrame*)AfxGetMainWnd();ASSERT(pFrame);
pFrame->m_flagTemplate = TRUE;
CRect rect;rect.left=0;rect.right=100;rect.top=0;rect.bottom=200;
CDC *pDC; pDC = GetDC();
DrawRect(pDC, rect, RGB(0,0,255), 2);
CClientDC pDC(this);
DrawRect(&pDC, rect, RGB(0,0,255), 2);
HWND hParent = ::GetParent(m_hWnd);
CMainFrame* pWnd = (CMainFrame*)AfxGetApp()->m_pMainWnd;
HDC hDC = GetDC(pWnd->m_hWnd);
CDC *pDC; pDC = GetDC();
EraseBkgnd(pDC,m_CamRect,m_DisRect);
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
CDC *pDC =pFrame->GetDC();
StretchDIBits(pDC->GetSafeHdc(),20,20,width,height,
0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
CPaintDC dc(this); // device context for painting
int width=m_CamRect.right; int height=m_CamRect.bottom;
// TODO: Add your message handler code here
CPaintDC dcView(GetDlgItem(IDC_IMG_HISTO_VIEW));
CRect rect;
GetDlgItem(IDC_IMG_HISTO_VIEW)->GetClientRect(&rect);
StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom, 0, 0,
width, height, m_pTestBitmap, &m_pBitmapInfo, BI_RGB, SRCCOPY);
CRect rect;
GetDlgItem(IDC_IMG_HISTO_VIEW)->GetWindowRect(&rect);
ScreenToClient(rect);
InvalidateRect(&rect, FALSE);
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
//CChildFrame *pFrame = (CChildFrame *)AfxGetMainWnd();
// CPaintDC *pDC;
CDC *pDC =pFrame->GetDC();
CVisionSysView* pView =( CVisionSysView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
CVisionSysDoc *pDoc=pView->GetDocument();
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// CDC *pDC =pFrame->GetDC();
CDC *pDC =pView->GetDC();
/*-------------- HDC 얻기------------------------------------------------------------*/
CWnd *pWnd = GetDlgItem(IDC_CAMERA_VIEW);
void CGraphResultPage3::DrawBitmap()
{
if (m_buf==NULL) return;
CRect rect;
GetDlgItem(IDC_IMG_HISTO_VIEW)->GetWindowRect(&rect);
ScreenToClient(rect);
InvalidateRect(&rect, FALSE);
}
void CGraphResultPage3::OnPaint()
{
CPaintDC dc(this); // device context for painting
// TODO: Add your message handler code here
if (m_buf==NULL) return;
BYTE *tmp;
// DWORD-align for display
tmp = JpegFile::MakeDwordAlignedBuf(m_buf,m_width,m_height,&m_widthDW);
// set up a DIB
BITMAPINFOHEADER bmiHeader;
bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
bmiHeader.biWidth = m_width; bmiHeader.biHeight = m_height;
bmiHeader.biPlanes = 1; bmiHeader.biBitCount = 24;bmiHeader.biCompression = BI_RGB;
bmiHeader.biSizeImage = 0; bmiHeader.biXPelsPerMeter = 0;
bmiHeader.biYPelsPerMeter = 0;bmiHeader.biClrUsed = 0;
bmiHeader.biClrImportant = 0;// CRect rect;
int width=bmiHeader.biWidth; int height=bmiHeader.biHeight;
CPaintDC dcView(GetDlgItem(IDC_IMG_HISTO_VIEW));
dcView.SetStretchBltMode(STRETCH_DELETESCANS);
CRect rect;
GetDlgItem(IDC_IMG_HISTO_VIEW)->GetClientRect(&rect);
StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom,
0, 0,width, height, tmp, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
delete [] tmp;
// Do not call CPropertyPage::OnPaint() for painting messages
}
/*-------------- HDC 얻기------------------------------------------------------------*/
CDC *theDC = GetDC();
if (theDC!=NULL) {
CRect clientRect;
GetClientRect(clientRect);
// Center It
UINT left = (clientRect.Width() - m_width) / 2;
UINT top = (clientRect.Height() - m_height) / 2;
// a 24-bit DIB is DWORD-aligned, vertically flipped and
// has Red and Blue bytes swapped. we already did the
// RGB->BGR and the flip when we read the images, now do
// the DWORD-align
BYTE *tmp;
// DWORD-align for display
tmp = JpegFile::MakeDwordAlignedBuf(m_buf,
m_width,
m_height,
&m_widthDW);
// set up a DIB
BITMAPINFOHEADER bmiHeader;
bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
bmiHeader.biWidth = m_width;
bmiHeader.biHeight = m_height; bmiHeader.biPlanes = 1;
bmiHeader.biBitCount = 24;
bmiHeader.biCompression = BI_RGB;
bmiHeader.biSizeImage = 0;
bmiHeader.biXPelsPerMeter = 0;
bmiHeader.biYPelsPerMeter = 0;
bmiHeader.biClrUsed = 0;
bmiHeader.biClrImportant = 0;
//---------------------------------------------
theDC->SetStretchBltMode(STRETCH_DELETESCANS);
//---------------------------------------------
// now blast it to the CDC passed in.
// lines returns the number of lines actually displayed
int lines = StretchDIBits(theDC->m_hDC,
BMP_START_EDGE_X1,BMP_START_EDGE_Y1,
512,
384,
0,0,
bmiHeader.biWidth,
bmiHeader.biHeight,
tmp,
(LPBITMAPINFO)&bmiHeader,
DIB_RGB_COLORS,
SRCCOPY);
delete [] tmp;
CString info;
info.Format("(%d x %d)", m_width, m_height);
theDC->SetBkMode(TRANSPARENT);
theDC->SetTextColor(RGB(0,0,0));
theDC->TextOut(10,5, info);
ReleaseDC(dc);
/*-------------- 다일로그/Propet 꽉찬 화면출력 화면-----------------------------------------*/
int CSETDlg::OnCreate(LPCREATESTRUCT lpCreateStruct)
{
if (CDialog::OnCreate(lpCreateStruct) == -1)
return -1;
// TODO: Add your specialized creation code here
ShowWindow(SW_SHOWMAXIMIZED);///화면 확대
UpdateWindow();
return 0;
}
/*-------------- Dialog를 메인화면으로 사용-----------------------------------------*/
#include "commtestDlg.h"
BOOL CCommtestApp::InitInstance()
{
// Standard initialization
// If you are not using these features and wish to reduce the size
// of your final executable, you should remove from the following
// the specific initialization routines you do not need.
#ifdef _AFXDLL
Enable3dControls(); // Call this when using MFC in a shared DLL
#else
Enable3dControlsStatic(); // Call this when linking to MFC statically
#endif
CCommtestDlg dlg;
m_pMainWnd = &dlg;
dlg.DoModal();
// Since the dialog has been closed, return FALSE so that we exit the
// application, rather than start the application's message pump.
return FALSE;
}
/*----------------------------------------------------------------------------------*/
MainFrame *pFrame=(CMainFrame*)AfxGetMainWnd();
CChildFrame *pChild=(CChildFrame*)pFrame->GetActiveFrame();
CWinColorDoc *pDoc=(CWinColorDoc*)pChild->GetActiveDocument();
CWinColorView *pView=(CWinColorView*)pChild->GetActiveView();
/*-------------- View 에서 App 얻기------------------------------------------------*/
CSECKLineDVM2App* pApp = (CSECKLineDVM2App*)AfxGetApp();
pApp->SetSerialInfo();
/*-------------- Doc 에서 View 얻기------------------------------------------------*/
CServerNetWorkView *pView=(CServerNetWorkView *)((CMainFrame *)AfxGetMainWnd())->GetActiveView ();
pView->Status_display(lpszMessage);
/*-------------- View에서 Doc 얻기------------------------------------------------*/
CSECKLineDVM2Doc* pDoc = GetDocument();
pDoc->
/*--------------메인프레임에서 View, Doc 얻기-------------------------------------*/
CSECKLineDVM2View* pView =
(CSECKLineDVM2View* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
pView->
CCSECKLineDVM2MultiDoc *pDoc;
pDoc=pView->GetDocument();
pDoc->
/*--------------다일로그에서 View, MainFrame, Doc 얻기---------------------------*/
..Dlg.h화일에 참조선언
#include "SECKLineDVM2MultiDoc.h"
..Dlg.cpp화일에 참조선언
#include "CSECKLineDVM2MultiView.h"
#include "MainFrm.h"
CSECKLineDVM2MultiView *pView=(CSECKLineDVM2MultiView *)((CMainFrame *)AfxGetMainWnd())->GetActiveView ();
pView->
CMainFrame* pFrame;
pFrame = (CMainFrame*)AfxGetApp()->m_pMainWnd;
pFrame->
CSECKLineDVM2View* pView =( CSECKLineDVM2View* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
CSECKLineDVM2Doc *pDoc;
pDoc=pView->GetDocument();
pDoc->
/*----------------------------다일로그 호출 종료----------------------------------*/
CProgressDlg Dlg;
Dlg.Create();
Dlg.DestroyWindow();
//--------------
EndDialog(IDOK);
CDialog::OnCancel();
EndDialog(IDCANCEL);
//--------------
/*------------------------MessageBox 선택-----------------------------------------*/
if (AfxMessageBox("모델코드를 찾지 못했습니다.!\n모델을 입력 하시겠습니까?.", MB_YESNO) == IDYES)
{
}
else
{
return;
}
/*-------------화면갱신----------------------------------------------------------*/
Invalidate(TRUE);
RedrawWindow();
/*-------------------------------------------------------------------------------*/
/*------------타이틀 제목 없애기-------------------------------------------------*/
BOOL CMainFrame::PreCreateWindow(CREATESTRUCT& cs)
{
if( !CFrameWnd::PreCreateWindow(cs) )
return FALSE;
// TODO: Modify the Window class or styles here by modifying
// the CREATESTRUCT cs
cs.style^=FWS_ADDTOTITLE; //제목 없음 없에기
return TRUE;
cs.style = WS_SYSMENU | WS_CAPTION | WS_MINIMIZEBOX | WS_MAXIMIZE;
cs.lpszName = " WASS-2000 Scanning System";
cs.x = cs.y = 0;
cs.cx = rct.right;
cs.cy = rct.bottom;
}
/*----------------------전체 화면 출력 위치조정------------------------------*/
cs.x=200; cs.y=200; cs.cx=400; cs.cy=400;
/*----------------------다일로그 디스플레이 위치 변경------------------------*/
CExpansionDlg1* g_pExpansion = NULL;
if(!g_pExpansion)
{
g_pExpansion = new CExpansionDlg1(this);
g_pExpansion->MoveWindow(50,387,354,320,true);//x,y,with,high
Invalidate(TRUE);
}
/*------------------프로그램 종료--------------------------------------------*/
윈도우 "x" 종료 (도큐먼트에 설정)
void CMainFrame::OnClose()
{
// TODO: Add your message handler code here and/or call default
if (MessageBox("프로그램을 종료 하시겠습니까? ", " 재고관리프로그램",
/*MB_ICONQUESTION*/ MB_ICONSTOP | MB_OKCANCEL) == IDOK) {
PostQuitMessage(0);
CFrameWnd::OnClose();
}
}
BOOL CScrubDoc::SaveModified()
{
// TODO: Add your specialized code here and/or call the base class
if(AfxMessageBox("프로그램을 종료하시겠습니까?",MB_ICONQUESTION|MB_YESNO)==IDYES)
{
OnClose();
PostQuitMessage(0);
//((CMainFrame*)AfxGetApp()->m_pMainWnd)->SendMessage(WM_CLOSE,0,0);
}
else
{
return 0;
}
/* CMainFrame* m_pMainWnd;
CMainWidowCloseDoc* pDataDoc = GetDocument();
if(IDOK==AfxMessageBox("프로그램을 종료하시겠습니까?",MB_OKCANCEL))
m_pMainWnd->OnClose;
pDataDoc->OnCloseDocument();
*/ return CDocument::SaveModified();
}
{
if(AfxMessageBox("프로그램을 종료하시겠습니까?",MB_ICONQUESTION|MB_YESNO)==IDYES)
{
OnClose();
PostQuitMessage(0);
}
else
{
return;
}
}
/*--------------------프로그램 종료-------------------------------------------*/
::ExitProcess(-1);
/*--------------------프린트다일로그 않보이고 바로 출력하기-------------------*/
BOOL CManagementView::OnPreparePrinting(CPrintInfo* pInfo)
{
// default preparation
pInfo->m_bDirect=TRUE;
return DoPreparePrinting(pInfo);
}
/*---------------------------다일로그 호출-----------------------------------*/
CMyGraphDemoDlg dlg;
int nResponse = dlg.DoModal();
if (nResponse == IDOK)
{
// TODO: Place code here to handle when the dialog is
// dismissed with OK
}
else if (nResponse == IDCANCEL)
{
// TODO: Place code here to handle when the dialog is
// dismissed with Cancel
}
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - Windows 제 어 - ////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------*/
/*-------------- 다일로그 크기조절 ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
SetWindowText("Image View");
MoveWindow(50, 50,400,300); //x위치, y위치, x Size, y Size
/*-----------------------------------------------------------------------------------*/
/*-------------- 윈도우 항상 위에 활성 ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
BOOL CMainFrame::PreCreateWindow(CREATESTRUCT& cs)
{
cs.dwExStyle = WS_EX_TOPMOST;
}
/*-----------------------------------------------------------------------------------*/
/*-------------- Menu Bar를 지우기 ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
CMenu* pMenu = new CMenu;
pMenu->Attach(cs.hMenu);
pMenu->DestroyMenu();
cs.hMenu = NULL;
delete pMenu;
/*-----------------------------------------------------------------------------------*/
/*-------------- 화면 갱신 ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
CStatic m_PcbImageView;
CRect m_rectLargeCanvas;
m_PcbImageView.GetWindowRect(&m_rectLargeCanvas);
ScreenToClient(&m_rectLargeCanvas);
InvalidateRect(m_rectLargeCanvas,FALSE);
//===============================================
Invalidate(TRUE);Invalidate(false);
RedrawWindow();
UpdateAllViews(FALSE);
UpdateData(FALSE);
/*------Hot Key------------------------------------------------------------*/
//--------------------------------------------------------------------------
BOOL CBroadView::PreTranslateMessage(MSG* pMsg)
{
// TODO: Add your specialized code here and/or call the base class
if (pMsg->message==MM_MCINOTIFY) {
if (pMsg->wParam==MCI_NOTIFY_SUCCESSFUL) {
StopWav();
}
}
if (pMsg->message==MY_MSG_FIRE_OFF) {
FireOff();
}
if (pMsg->message==WM_KEYDOWN) {
if (GetAsyncKeyState(VK_F1)&0x8000) {
if (GetAsyncKeyState(VK_F5)&0x8000) {
if (GetAsyncKeyState(VK_F9)&0x8000) {
if (m_SetupBtn.IsWindowVisible()==FALSE) {
FuncBtnShow(SW_SHOW);
}
}
}
}
// 2007.2.15
if (GetAsyncKeyState(VK_F6)&0x8000){m_bPingViewChk=TRUE;Invalidate(FALSE);SetTimer(REDRAW_TIMER,2000,NULL);}//RedrawWindow();
}
return CFormView::PreTranslateMessage(pMsg);
}
/*-------------- 메인프레임 상속 받아 다일로그 호출-----------------------------------------*/
//--------------------------------------------------------------------------------------------
void ResultShowDlgBar(CString str)
{
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
CRect rect;
pFrame->GetWindowRect(&rect);
if (!pFrame->m_ResultShowBar.IsWindowVisible())
{
pFrame->DockControlBar(&pFrame->m_ResultShowBar);
pFrame->m_ResultShowBar.ShowWindow(SW_SHOW);
pFrame->FloatControlBar(&pFrame->m_ResultShowBar,CPoint(rect.right-324,rect.bottom-125));
}
CEdit *pEdit = (CEdit *)pFrame->m_ResultShowBar.GetDlgItem(IDC_RESULTSHOW);
int nLength = pEdit->GetWindowTextLength();
if(nLength<10000) pEdit->SetSel(nLength, nLength);
else pEdit->SetSel(nLength-10000, nLength);
pEdit->ReplaceSel(str);
pFrame->RecalcLayout();
}
/*-----------------------------------------------------------------------------------*/
/*-------------- Extern File에서 다일로그제어 ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
#include "TestDlg.h"
CTestDlg *TestDlg;
TestDlg=NULL;
if(TestDlg->GetSafeHwnd() == NULL)
{
TestDlg= new CTestDlg;
TestDlg->Create(IDD_TESTDIALOG1);
//manu_Swstatus = MENU_MANUAL;//3
}
TestDlg->ShowWindow(FALSE);
// TestDlg->SetDlgItemText(IDC_DLGSTATIC,"TEST 2006.12");
TestDlg->m_csData="Dlg Text 2006";
if(TestDlg->GetSafeHwnd() != NULL) TestDlg->ShowWindow(true);
if(TestDlg->GetSafeHwnd() != NULL)
{
CString csTmp;
TestDlg->GetDlgItemText(IDC_DLGSTATIC,csTmp);
AfxMessageBox(csTmp);
}
//============================================================
void ResultShowDlgBar(CString str)
{
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
CRect rect;
pFrame->GetWindowRect(&rect);
if (!pFrame->m_ResultShowBar.IsWindowVisible())
{
pFrame->DockControlBar(&pFrame->m_ResultShowBar);
pFrame->m_ResultShowBar.ShowWindow(SW_SHOW);
pFrame->FloatControlBar(&pFrame->m_ResultShowBar,CPoint(rect.right-324,rect.bottom-125));
}
CEdit *pEdit = (CEdit *)pFrame->m_ResultShowBar.GetDlgItem(IDC_RESULTSHOW);
int nLength = pEdit->GetWindowTextLength();
if(nLength<10000) pEdit->SetSel(nLength, nLength);
else pEdit->SetSel(nLength-10000, nLength);
pEdit->ReplaceSel(str);
pFrame->RecalcLayout();
}
/*-----------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------*/
/*-------------- 다일로그 확장-------------------------------------------------------*/
int m_nNormalWidth;
int m_nExpandedWidth;
BOOL m_bExpanded;
void CExpandDlgDlg::ExpandyaContract()
{
CRect rcDlg, rcMarker;
GetWindowRect(rcDlg);
if (!m_bExpanded)
{
m_nExpandedWidth = rcDlg.Width();
m_Devide.GetWindowRect(rcMarker);
m_nNormalWidth = (rcMarker.right - rcDlg.left);
rcDlg.SetRect(rcDlg.left, rcDlg.top, rcDlg.left + m_nNormalWidth+12,
rcDlg.top + rcDlg.Height());
HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
while (hWndChild != NULL)
{
hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
::EnableWindow(hWndChild, m_bExpanded);
}
}
else
{
rcDlg.SetRect( rcDlg.left, rcDlg.top, rcDlg.left + + m_nExpandedWidth,
rcDlg.top + rcDlg.Height() );
HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
while (hWndChild != NULL)
{
hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
::EnableWindow(hWndChild, m_bExpanded);
}
}
MoveWindow(rcDlg, TRUE);
m_bExpanded = !m_bExpanded;
}
/*-----------------------------------------------------------------------------------*/
/*-------------- 투명 다일로그-------------------------------------------------------*/
#define WS_EX_LAYERED 0x00080000
#define LWA_COLORKEY 1 // Use color as the transparency color.
#define LWA_ALPHA 2 // Use bAlpha to determine the opacity of the layer
typedef BOOL (WINAPI *lpfn) (HWND hWnd, COLORREF cr, BYTE bAlpha, DWORD dwFlags);
lpfn g_pSetLayeredWindowAttributes;
HMODULE hUser32 = GetModuleHandle(_T("USER32.DLL"));
g_pSetLayeredWindowAttributes = (lpfn)GetProcAddress(hUser32, "SetLayeredWindowAttributes");
HWND m_hCurrWnd; // Handle to the window over which the mouse was last present
m_hCurrWnd=*this;
if (g_pSetLayeredWindowAttributes)
{
::SetWindowLong(m_hCurrWnd, GWL_EXSTYLE, GetWindowLong(m_hCurrWnd, GWL_EXSTYLE) | WS_EX_LAYERED);
g_pSetLayeredWindowAttributes(m_hCurrWnd, 50, 100, LWA_ALPHA);
}
/*-----------------------------------------------------------------------------------*/
/*-------------- Windows 이벤트------------------------------------------------------*/
#define define WSA_ASYNC (WM_USER+1)
//.h-----------------------------------
protected:
//{{AFX_MSG(CHDDINSPView)
afx_msg LONG UDPOnReceive(UINT,LONG);
//.cpp----------------------------------
BEGIN_MESSAGE_MAP(CHDDINSPView, CFormView)
//{{AFX_MSG_MAP(CHDDINSPView)
//}}AFX_MSG_MAP
ON_MESSAGE(WSA_ASYNC,UDPOnReceive)
LONG CHDDINSPView::UDPOnReceive(UINT wParam, LONG lParam)
{
}
/*-----------------------------------------------------------------------------------*/
/*-------------- 스레드에서 변수 참조------------------------------------------------*/
UINT RepeatThread(LPVOID pFuncData)
{
CCAMCFS20Dlg *pParent = (CCAMCFS20Dlg *)pFuncData;
INT16 nAxis;
double dDistance, dVelocity, dAccel;
nAxis = pParent->m_nAxis;
dDistance = pParent->GetDlgItemDouble(IDC_DISTANCE);
dVelocity = pParent->GetDlgItemDouble(IDC_VELOCITY);
dAccel = pParent->GetDlgItemDouble(IDC_ACCELERATION);
pParent->bRepeatFlag = TRUE;
}
void CWinColorView::OnDraw(CDC* pDC)
{
CWinColorDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
// TODO: add draw code for native data here
if(pDoc->m_InImg==NULL) return;
height = pDoc->dibHi.biHeight;
width = pDoc->dibHi.biWidth;
rwsize = WIDTHBYTES(pDoc->dibHi.biBitCount*pDoc->dibHi.biWidth);
BmInfo->bmiHeader = pDoc->dibHi;
SetDIBitsToDevice(pDC->GetSafeHdc(),0,0,width,height,
0,0,0,height,pDoc->m_InImg,BmInfo, DIB_RGB_COLORS);
}
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 기타 정리 - ///////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
//------프로그램 폴더안에 include화일 참조 선언 -----------------------------------------//
#include "../include/PortInclude.h"
//---------------------------------------------------------------------------------------//
//---시간 계산---------------------------------------------------------------------------//
double m_lStartTimeOneChipCycle = GetCurrentTime();
double m_lEndTimeOneChipCycle = GetCurrentTime();
double m_OneCycleTime=(m_lEndTimeOneChipCycle - m_lStartTimeOneChipCycle) * 0.001;
//---------------------------------------------------------------------------------------//
/*----------------------------------시간 얻기-------------------------------------*/
COleDateTime ccTestTime;
CString strTmp;
ccTestTime=COleDateTime::GetCurrentTime();
// strTmp=ccTestTime.Format("%I:%M:%S %p");
strTmp=ccTestTime.Format("%I:%M:%S");
m_clbTime.SetCaption(strTmp);
int nTime;
COleDateTime odtDate=COleDateTime::GetCurrentTime();
nTime=odtDate.GetYear();
nTime=odtDate.GetMonth();
nTime=odtDate.GetDay();
nTime=odtDate.GetHour();
nTime=odtDate.GetMinute();
nTime=odtDate.GetSecond();
SYSTEMTIME SystemTime, SystemTime2;
GetSystemTime( &SystemTime);
GetSystemTime( &SystemTime2);
TRACE("JOG MINUS Time Value = %d \n", SystemTime2.wMilliseconds - SystemTime.wMilliseconds);
//---------------------------------------------------------------------------------------//
/* 선언부 */
#define PI 3.1415926535
#include <math.h>
#define RADIUS 150
// 1. 영역구함
CRect rect;
GetClientRect(rect);
// 2. 이미지 중간점 구함
int m_nCenterX = rect.Width() / 2; // Center X point
int m_nCenterY = rect.Height()/ 2; // Center Y point
// 3. 반지름
int nHalf = RADIUS; // 반지름
// 4. 계산할 각도 구함
int m_nAngle = 0;
m_nAngle = 360 / m_nRingNum; // m_nRingNum <-- 점의 갯
// 5. 저장할 점 선언
CPoint *pt;
for ( int i = 0; i < m_nRingNum ; i++)
{
int nAxisX = 0;
int nAxisY = 0;
if( i == 0)
{
nAxisX = (int)( cos(360*(PI / 180)) * nHalf ); // X point
nAxisY = (int)( sin(360*(PI / 180)) * nHalf ); // Y point
}
else
{
nAxisX = (int)( cos((m_nAngle*i)*(PI / 180)) * nHalf ); // X point
nAxisY = (int)( sin((m_nAngle*i)*(PI / 180)) * nHalf ); // Y point
}
// 6. 구한 점 저장
pt[i].x = nAxisX;
pt[i].y = nAxisY
}
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 다른프로그램 실행 - /////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
/*------인터넷사이트 실행------------------------------------------------------------*/
WinExec("C:\\Program Files\\Internet Explorer\\IEXPLORE.EXE www.taeyang.com",SW_SHOW);
WinExec("C:\\YeTools\\CpComSys\\CpPrc.exe",SW_SHOWMINIMIZED);
/*------응용프로그램 실행------------------------------------------------------------*/
h. 헤더파일 선언 PROCESS_INFORMATION m_pi; //다른 프로그램 자동 실행및 종료를 위한
STARTUPINFO StartupInfo = {0};
StartupInfo.cb = sizeof(STARTUPINFO);
PROCESS_INFORMATION ProcessInfo;
StartupInfo.dwFlags = STARTF_USESHOWWINDOW;
StartupInfo.wShowWindow = SW_HIDE;//안보이기 SW_SHOWMINIMIZED-최소화
if(!::CreateProcess(NULL, "C:\\YeTools\\CpComSys\\DLL\\CpPrc.exe",
//if(!::CreateProcess(NULL, "DataCPK.exe",
NULL, NULL, FALSE, 0, NULL, NULL, &StartupInfo, &ProcessInfo))
{
AfxMessageBox("C:\\YeTools\\CpComSys\\CpPrc.exe 실행 화일을 찾을 수 없습니다.");
}
m_pi = ProcessInfo;
// 종료------Close------------------------
HANDLE Killprocess;
CString szKillProgramName;
szKillProgramName = "C:\\YeTools\\CpComSys\\CpPrc.exe";//종료할 프로그램 위칭르 넣으 시요..
Killprocess = OpenProcess(PROCESS_TERMINATE,0,m_pi.dwProcessId);
TerminateProcess(Killprocess, (unsigned)-1);
C:\\Program Files\\Amfis1130\\SigmaTV.exe
/*
CloseHandle(m_pi.hProcess);
CloseHandle(m_pi.hThread);
LPSTR gAppName = "C:\\YeTools\\CpComSys\\CpPrc.exe";
if (FindWindow(gAppName, NULL)) {
PostQuitMessage(0);
}
*/
/*------NOTE PAD 실행------------------------------------------------------------*/
char csNote[128];
strcpy(csNote,"c:\\Windows\\NOTEPAD ");
strcat(csNote,filename);
WinExec(csNote,SW_SHOW);
//------CString에 저장 후 메모장으로 보기------------------------------------------
m_csDisplay="";m_bShowDisplay=true;
NotePadDisplay();
void Status_display(CString sdisplay)
{
if(m_bShowDisplay){m_csDisplay+=sdisplay+"\n"; if(m_csDisplay.GetLength()>=65550)m_csDisplay=""; }
}
void NotePadDisplay(void)
{
FILE *fp; CString Contents, datename, filename;
filename="test.txt";
if ((fp = fopen(filename,"w+")) == NULL) {
AfxMessageBox("File Open Error.");
fclose(fp);
return ;}
Contents.Insert(Contents.GetLength(),m_csDisplay);
fwrite(Contents,1,Contents.GetLength(),fp);
fclose(fp);
char csNote[128];
strcpy(csNote,"c:\\Windows\\NOTEPAD ");
strcat(csNote,filename);
WinExec(csNote,SW_SHOW);
strcpy(csNote,"c:\\WINNT\\NOTEPAD ");
strcat(csNote,filename);
WinExec(csNote,SW_SHOW);
}
/*------실행화일 디렉토리 구하기--- -------------------------------------------------------*/
//--------SetCurrentDirectory----------------------------------------------------------------
if( mDAT.tot < 1 ) return;
int stat;
char *str;
CString fname;
DATE_INF day;
str = new char[MAX_PATH+10];
::GetCurrentDirectory(MAX_PATH+1,str);
uiGetSysDate(&day);
fname.Format(_T("DOC\\%s%04d%02d%02d.TXT"),
//-----------------------------------------------------------
(char *)(LPCTSTR)mDAT.pid,day.yy%100,day.mo,day.dd);
//-----------------------------------------------------------
CFileDialog dlg(FALSE,"DOC",fname,OFN_HIDEREADONLY,"프린트화일 (*.TXT)|*.TXT");
stat = dlg.DoModal();
::SetCurrentDirectory(str);
delete str;
if( stat != IDOK ) return;
fname = dlg.GetPathName(); ApSaveSeekDataInfor(fname,mDAT);
char *str;
CString fname;
str = new char[_MAX_PATH+1];
::GetCurrentDirectory(_MAX_PATH+1,str);
AfxMessageBox((LPCTSTR)(char *)str);
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 화 일 - /////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
//======================================================================================
/*------파일 다일로그-----------------------------------------------------------------*/
//======================================================================================
//==============화일 다일로그 PATH 지정 sprintf (CString으로 지정이 않되는 경우)=============
CString csModelFile="C:\\AttachMachine\\Model\\MODEL1.txt";
char szBuf[1024];sprintf(szBuf,csModelFile);
//===============화일 Load 다일로그==========================================================
void CAttachMachineView::OnClickFileLoadBtn()
{
// TODO: Add your control notification handler code here
CFileDialog filedlg( TRUE,// TRUE : FileOpen, FALSE :FileClose
_T("ini"), // 디폴트 확장자
//_T("C:\\AttachMachine\\EquipSys\\*.*"), // 디폴트 파일명 --마지막\\*.*
_T("C:\\AttachMachine\\EquipSys\\Test.ini"), // 디폴트 파일명 --현재 사용 파일을 제시
OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,
// OPENFILENAME
// OFN_CREATEPROMPT
//"텍스트 파일 (*.txt) | *.txt |데이타 파일 (*.dat; *.hex) | *.dat; *.hex|모든 파일 (*.*) | *.* ||",
"File Load Data INI Files (*.ini)|*.ini||",
// 필터
// 부모 윈도우
NULL
);
if(filedlg.DoModal()==IDOK)
{
CString szFileDir=filedlg.GetPathName();
SEQ.csSpecFileName=szFileDir;
FileData_DataSysGet(szFileDir,FILE_SPEC);
Sub_SpecDataDisplay();
}
}
//================새로운 이름으로 저장 =====================================================
void CAttachMachineView::OnClickFileNewSaveBtn()
{
// TODO: Add your control notification handler code here
CString szFileName=""; CString csFileName="";
CString szFileDir="";
CString csTmp=""; CString csCh=""; CString csLoad="";
//CFileDialog filedlg(FALSE,_T(""),_T(csTmp),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장
//CFileDialog filedlg(FALSE,_T(""),_T("C:\\AttachMachine\\Model\\*.*"),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장
CFileDialog filedlg(FALSE,_T(""),_T("C:\\AttachMachine\\Model\\Test.ini"),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장,현재 사용 파일을 제시
"Save AS Data INI Files (*.ini)|*.ini||",NULL);//"files (*.*)",NULL);
if (filedlg.DoModal()==IDOK)
{
szFileDir=filedlg.GetPathName(); //AfxMessageBox(szFileDir);//전체 화일+확장자까지
if(Sub_SpecDataFileSave(szFileDir))
{
SEQ.csSpecFileName=szFileDir;
}
else
AfxMessageBox("화일로 저장 하지 못했습니다.");
}
}
/*------파일열기 다일로그------------------------------------------------------------*/
void CFileDlgDlg::OnOpenFile()
{
// TODO: Add your control notification handler code here
CFileDialog dialog( TRUE,// TRUE : FileOpen, FALSE :FileClose
_T("txt"), // 디폴트 확장자
_T("C:\\Data\\*.*"), // 디폴트 파일명 --마지막\\*.*
OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,
// OPENFILENAME
// OFN_CREATEPROMPT
"텍스트 파일 (*.txt) | *.txt |데이타 파일 (*.dat; *.hex) | *.dat; *.hex|모든 파일 (*.*) | *.* ||",
// 필터
// 부모 윈도우
NULL
);
dialog.DoModal();
}
//---------------------------------------------------------------
CString InitialDir=Path_Image;// AfxMessageBox(Path_Model);
InitialDir+="*.*";
CString Title = "SET IMAGE LOAD";
//-------------------
LPSTR File = InitialDir.GetBuffer(InitialDir.GetLength()*2); //*char
CFileDialog ImgDlg(TRUE,_T(Title),_T(InitialDir),OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,
// CFileDialog ImgDlg(TRUE,_T(Title),File,OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,
"Image files (*.jpg)|*.jpg||",NULL);
if (ImgDlg.DoModal()==IDOK)
{
// tmModel.SetImage = ExtractFileName(ImgDlg->FileName);
// dpSname->CaptionFalse = tmModel.SetImage;
}
//---------------------------------------------------------------
void CFileDlgDlg::OnSaveFile()
{
// TODO: Add your control notification handler code here
CFileDialog dialog( FALSE,// TRUE : FileOpen,// FALSE :FileClose
_T("txt"), // 디폴트 확장자
_T("C:\\Data\\Untitled.txt"), // 디폴트 파일명
OFN_OVERWRITEPROMPT | OFN_HIDEREADONLY,
// OPENFILENAME
// OFN_CREATEPROMPT
"텍스트 파일 (*.txt) | *.txt |데이타 파일 (*.dat; *.hex) | *.dat; *.hex|모든 파일 (*.*) | *.* ||",
// 필터
// 부모 윈도우
NULL
);
dialog.DoModal();
}
//===파일 읽기/저장 다일로그 ========================================================
CString szFileName=""; CString csFileName="";
CString szFileDir="";
CString csTmp=""; CString csCh=""; CString csLoad="";
// CFileDialog filedlg(TRUE,_T(""),_T(csTmp),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//열기
CFileDialog filedlg(FALSE,_T(""),_T(csTmp),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장
"Save AS Excel CSV Files (*.csv)|*.csv||",NULL);//"files (*.*)",NULL);
if (filedlg.DoModal()==IDOK)
{
szFileDir=filedlg.GetPathName(); AfxMessageBox(szFileDir);//전체 화일+확장자까지
szFileName=filedlg.GetFileTitle(); AfxMessageBox(szFileName);//입력 화일명만
szFileName=filedlg.GetFileName(); AfxMessageBox(szFileName);//입력 화일과 확장자 까지
//화일명 뺀 화일 Dir
int index1=0; int index2=0; int nMode=0;
index1=szFileDir.GetLength(); index2=szFileName.GetLength();
csTmp=szFileDir.Mid(0,(index1-index2));
szFileName=csTmp; AfxMessageBox(szFileName);
//_mkdir(szFileName);
}
//===읽기========================================================
//---------------------------------------------------------------
csFileDir=filedlg.GetPathName(); //전체 디렉토리+화일명+확장자
csFileName=filedlg.GetFileName();//화일명+확장자
//---------------------------------------------------------------
CString strFilter;
strFilter.LoadString(AFX_IDS_PICTUREFILTER);
CString strTitle;
strTitle.LoadString(AFX_IDS_PICTUREBROWSETITLE);
CFileDialog fdlg(TRUE, NULL, NULL,
OFN_FILEMUSTEXIST |
OFN_HIDEREADONLY |
OFN_PATHMUSTEXIST,
strFilter);
fdlg.m_ofn.lpstrTitle = strTitle;
int nResult = fdlg.DoModal();
SetFocus();
if (nResult != IDOK)
return;
CString strPath = fdlg.GetPathName();
//---------------------------------------------------
CString csFileName="";
CString csFileDir="";
CString csOpenDir; csOpenDir=CSProgramDir+CSFileSpecDataDir+CSDriveDataFileName+"\\";
CFileDialog filedlg(TRUE,_T("*.INI"),_T(csOpenDir),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,
"INI files (*.ini)|*.ini||",NULL);
if (filedlg.DoModal()==IDOK)
{
csFileDir=filedlg.GetPathName();
CString csTmp;CString csBuf; CString csImage;
if(csFileDir.GetLength()>0)
{
UpdateData(TRUE);
CString csDriveName=csFileDir;
CString filename = csDriveName;//+".ini";
FileData_UpdateCommandData(filename);
CommandDataUpdateDisplay();
UpdateData(FALSE);
}
}
//------------------------------------------------------------------
CString szFileName;
CFileDialog filedlg(TRUE,"bmp",NULL,OFN_FILEMUSTEXIST,
"BMP files (*.bmp)|*.bmp||",NULL);
// if (freezeMode==FREEZE_BITMAP)
{
if (filedlg.DoModal()==IDOK)
{
szFileName=filedlg.GetPathName();
szFileName=filedlg.GetFileName();
}
}
//-----------------------------------------------------------
int result;
result=filedlg.DoModal();
switch(result)
{
case IDOK:
szFileName=filedlg.GetPathName();
break;
}
return;
/=======================================================================================
// 화일
//======================================================================================
//==============화일 GetPrivateProfileString==================================================
char Retemp[256];
char Lotemp[256];
char Filetemp[2048];
char Postemp[256];
//상대 주소 -PLC
GetPrivateProfileString("CONFIG","REMOTE_ADDR","192.168.001.1",Retemp,256,".\\config.ini");
int iRePort = GetPrivateProfileInt("CONFIG","REMOTE_PORT",20000,".\\config.ini");
//현재 주소 -PC
GetPrivateProfileString("CONFIG","LOCAL_ADDR","192.168.001.200",Lotemp,256,".\\config.ini");
int iLoPort = GetPrivateProfileInt("CONFIG","LOCAL_PORT",20001,".\\config.ini");
// 작업모델 화일 Dir
GetPrivateProfileString("FILE","FILENAME","DataSpec.ini",Filetemp,2048,".\\config.ini");
CSFileSpecFileName=Filetemp;
FileData_DataSysGet(CSFileSpecFileName,FILE_SPEC);
// 카메라 X 위치 옵셋
GetPrivateProfileString("AXIS","CAM_POS_X","20",Postemp,256,".\\config.ini");
m_fCamOffsetPos_X=(float)atof((LPCSTR)Postemp);
// 카메라 Y 위치 옵셋
GetPrivateProfileString("AXIS","CAM_POS_Y","20",Postemp,256,".\\config.ini");
m_fCamOffsetPos_Y=(float)atof((LPCSTR)Postemp);
//==============화일 WritePrivateProfileString==================================================
char temp[256];
char Filetemp[2048];
memset(Filetemp, 0, 2048);
lstrcat(Filetemp, SEQ.csSpecFileName);
WritePrivateProfileString("FILE","FILENAME",Filetemp,CSProgramDir+"\\config.ini");
GetDlgItemText(IDC_LISTEN_EDIT,temp,256);
WritePrivateProfileString("CONFIG","LISTEN_PORT",temp,CSProgramDir+"\\config.ini");
//=======================================================================================
FILE *inn;
int i;
CString fstr = SysDir;
fstr += "\\calibration.rsl";
if( (inn= fopen(fstr,"r") ) != NULL )
{
for(i=0;i<7;i++)
fscanf(inn,"%lf",&m_Calib.Val[i]);
fclose(inn);
}
else
AfxMessageBox("File could not be opened.",MB_OK,0);
//=======================================================================================
FILE *inn;
CString fstr = SysDir;
fstr += "\\rotate.rsl";
if( (inn= fopen(fstr,"w") ) != NULL )
{
fprintf( inn, "%lf %lf %lf %lf\n",m_Rotate.a,m_Rotate.b,m_Rotate.c,m_Rotate.d);
fclose(inn);
}
else
AfxMessageBox("File could not be opened.",MB_OK,0);
//===============화일 복사===============================================================
sFileName=strSelectedPath + "\\" + "Pcb.dat";
tFileName=strBackUpPath + "\\" +"Pcb.dat";
CopyFile(sFileName, tFileName , false);
//===============확장자 검색=============================================================
fileName=fileDlg.GetPathName();
CString ext=fileName.Right(4);
if (!ext.CompareNoCase(".JPG"))
{
// AX_LoadJPG(fileName);
// SetDlgItemText(IDC_FILEDIR_STATIC, fileName);
}
if (!ext.CompareNoCase(".BMP"))
{
LoadBMPToSet(fileName);
// SetDlgItemText(IDC_FILEDIR_STATIC, fileName);
}
//=======================================================================================
FILE *fp;
fp=fopen(fileName,"rb");
if (fp==NULL) {
CString msg;
msg="Can't open file for reading :\n"+fileName;
m_errorText=msg;
return NULL;
}
else
{
if (fread((void *)(pixel),1,3,fp)==3)
{
*(outBuf+ADDr)=pixel[2]; // r
*(outBuf+ADDg)=pixel[1]; // g
*(outBuf+ADDb)=pixel[0];
}
}
fclose(fp);
//=====================================================================================
HFILE fi;
CString Contents=csData; CString csfilename="";
// csfilename=CSFileTestDataDir+csFileName;
csfilename =FileData_TestFileDirChk(csFileName, nMode, nCh);
fi=_lopen(csfilename,OF_READWRITE);
int len;
len=_lwrite(fi,(LPCSTR)m_csTestFileData[nCh],strlen(m_csTestFileData[nCh]));
_lclose(fi);
/*------파일 -------------------------------------------------------*/
CString csfilename=_T(""); CString Contents=_T("");
if(nCh>=CHMAX) return Contents;
// filename = CSFileTestDataDir+csFileName;
csfilename =FileData_TestFileDirChk(csFileName, FILE_CSV, nCh);
CFile file(csfilename,CFile::modeReadWrite|CFile::shareExclusive);
// CFile file("C:\\Polaronix\\Data\\Ch01.csv",CFile::modeReadWrite |CFile::shareExclusive);
DWORD filesize=file.GetLength();
char *buf=new char[filesize+1];
file.Read(buf,filesize);
file.Close();
buf[filesize]=NULL;
Contents=LPCSTR(buf); delete buf;
return Contents;
/*------파일 -------------------------------------------------------*/
CString csData="";
char* pFileName = "C:\\Polaronix\\Data\\Ch01.csv";
CStdioFile file;
if( !file.Open( pFileName,
// | CFile::modeWrite | CFile::typeText ) ) {
CFile::modeRead | CFile::typeText ) ) {
}
file.ReadString(csData);
AfxMessageBox(csData);
file.Close();
/*------파일 Open--------------------------------------------------*/
csBmpFile=_T("Bin\\bmp3_96.bin");
CFile *aFile;
try
{
aFile=new CFile(csBmpFile,CFile::modeCreate | CFile::modeNoTruncate | CFile::modeReadWrite | CFile::shareDenyNone);
}
catch(CFileException *e)
{
e->Delete();
}
aFile->Abort(); //파일 닫기 실한 경우 예외 발생 않함
// aFile->Close();
// delete aFile;
CString csBmpFile;
csBmpFile=_T("Bin\\bmp1_128.bin");
CFile *aFile;
try
{
// UINT readByte;
aFile=new CFile(csBmpFile,CFile::modeNoTruncate|CFile::modeReadWrite|CFile::shareDenyNone);
if(m_ZoomSize_X==96)
{
aFile->Write(temp2,12288);
}
else
{
aFile->Write(temp2,24576);
}
}
catch(CFileException *e)
{
e->Delete();
}
aFile->Abort(); //파일 닫기 실패한 경우 예외 발생 않함
// aFile->Close();
// delete aFile;
/*------파일 Open--------------------------------------------------*/
HFILE fi;
fi=_lopen("Bin\\bmp.bin",OF_READWRITE);
int len;
len=_lwrite(fi,(LPCSTR)temp1,strlen(temp1));
_lclose(fi);
FILE *fp;
filename="Bin\\bmp.bin";
if ((fp = fopen(filename,"w+")) == NULL) {
AfxMessageBox("File Open Error.");
fclose(fp);
return ;
}
// Contents.Insert(Contents.GetLength(),
// Contents.Format(csBmp);
fwrite(Contents,1,Contents.GetLength(),fp);
fclose(fp);
/*------파일 Open--------------------------------------------------*/
#SETUP$
DF34257
CAS124T0
AS1234DF
SDFG4321
#ENDEQ$
void CSBottleView::FileDataUpdate(int nMode)
{
CString csItemNameSelectFileName=_T("EquipSys\\ItemNameSelect.ini");
__int16 length, exist;
char str[200];
int index=0;
int nCount=0;
FILE *fp ;
CString filename=_T("");
CString ReadData=_T("");
CString strTmp=_T("");
BOOL bFileCheck=false;
BOOL bFileCheck2=false;
m_csModelItemName[1]=_T("");
m_csModelItemName[2]=_T("");
m_csModelItemName[3]=_T("");
m_csModelItemName[4]=_T("");
if(nMode==ITEMNAME)
filename = csItemNameSelectFileName;
else return;
exist = access(filename,0);
if (!exist && (fp = fopen(filename,"rt")) != NULL) {
while (!feof(fp)) {
ReadData.Empty();
if ( fgets(str, 200, fp) != NULL) { // error Return NULL
ReadData.Format("%s", str);
length = ReadData.GetLength();
if(bFileCheck2==false)
{
index = ReadData.Find("#SETUP$");
if(index>=0){bFileCheck=true; index=0; }
else{AfxMessageBox("설정 데이타가 없습니다 !"); break;}
}
index = ReadData.Find("\t");
if(index>=0)
{
ReadData.Format("%s", ReadData.Mid(0 , length-2));
}
else
{
ReadData.Format("%s", ReadData.Mid(0 , length-1));
}
if(ReadData=="#ENDEQ$"){break;}
if(bFileCheck)
{
if(bFileCheck2)
{
if(nCount>=60){AfxMessageBox("저장된 데이타가 너무많습니다");break;}
if(nCount==0)
{m_csModelItemName[1]=ReadData;}
else if(nCount==1)
{m_csModelItemName[2]=ReadData;}
else if(nCount==2)
{m_csModelItemName[3]=ReadData;}
else if(nCount==3)
{m_csModelItemName[4]=ReadData;}
nCount++;
}
}
bFileCheck2=true;
}
}
/// fclose(fp);
} else {
AfxMessageBox("설정데이타가 없습니다! ItemNameSelect.data 화일이 없습니다."); return;//return 않하면 프로그램 에러
}
fclose(fp);
UpdateData(FALSE);
}
/*------파일 Open--------------------------------------------------*/
FILE *fpRobot;
CString str;
fpRobot = fopen("robot.txt", "rw+");
fprintf(fpRobot, "%s", str);
fclose( fpRobot );
/*------파일 생성 및 NotePad로 실행--------------------------------------------------*/
FILE *fp;
CString Contents, datename, filename;
filename="test.txt";
if ((fp = fopen(filename,"w+")) == NULL) {
AfxMessageBox("File Open Error.");
fclose(fp);
return ;
}
Contents.Format("\r\n=== FILE INFORMATION ===\r\n");
Contents.Insert(Contents.GetLength(),"\r\nDATE & TIME\t");
Contents.Insert(Contents.GetLength(),datename);
Contents.Insert(Contents.GetLength(),"\r\nOPERATOR\t");
Contents.Insert(Contents.GetLength(),"\r\n\r\nFile Name\t");
Contents.Insert(Contents.GetLength(),filename);
Contents.Insert(Contents.GetLength(),"\r\n\r\n");
Contents.Insert(Contents.GetLength(),"=== ERROR LISTS ===\r\n\r\n");
Contents.Insert(Contents.GetLength(),
" ERR TIME\tCODE\tERROR MESSAGE \tOPERATORr\n\r\n");
fwrite(Contents,1,Contents.GetLength(),fp);
fclose(fp);
char csNote[128];
strcpy(csNote,"c:\\Windows\\NOTEPAD ");
strcat(csNote,filename);
WinExec(csNote,SW_SHOW);
/*----------------다른 폴더에서 파일copy 후 다른이름으로 저장 -------------*/
SHFILEOPSTRUCT sfo;
memset(&sfo,0,sizeof(sfo));
sfo.wFunc = FO_COPY;
sfo.pFrom = _T("C:\\Aatool\\equip1.dat\0");
sfo.pTo = _T("C:\\DATA\\suho.dat\0");
/* sfo.wFunc = FO_RENAME;
sfo.pFrom = _T("C:\\DATA\\equip1.dat\0");
sfo.pTo = _T("C:\\DATA\\ok.dat\0");
*/
SHFileOperation(&sfo);
/*----------------여러 화일 삭제 -----------------------------------------------------------*/
SHFILEOPSTRUCT sfo;
memset(&sfo,0,sizeof(sfo));
sfo.wFunc = FO_DELETE;
sfo.fFlags =OFN_SHOWHELP; //메시지 창 뛰우지 않음
sfo.pFrom = _T("Bmp\\*.*");
SHFileOperation(&sfo);
/*------------------------------화일삭제--DeleteFile---------------------------------------*/
UpdateData(TRUE);
CCPKView* pView =( CCPKView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
CCPKDoc *pDoc;
pDoc=pView->GetDocument();
int year,month;
year=month=0;
year=2001;
month=5;
if(AfxMessageBox(" ''Are You Sure ! DataBase delete ?'' ",MB_ICONQUESTION|MB_YESNO)==IDYES)
{
pDoc->DeleteDB(year,month);
}
else
{
return;
}
void CCPKDoc::DeleteDB(int year, int month)
{
CString csFile;
csFile.Format("DATA\\CPK%4d%02d.mdb", year, month);
DeleteFile((LPCTSTR)csFile);
csFile.Format("DATA\\CPK%4d%02d.ldb", year, month);
DeleteFile((LPCTSTR)csFile);
}
SHFILEOPSTRUCT sfo;
memset(&sfo,0,sizeof(sfo));
sfo.wFunc = FO_DELETE;
sfo.pFrom = _T("C:\\DATA\\200101.mdb\0");
SHFileOperation(&sfo);
/*----------------------------------Windows 레지스트리에 저장-----------------------*/
void CPSRecorderView::INI_Get()
{
char buff[1024];
CString m_csTmpString;
m_csTmpString = "NONE";
GetPrivateProfileString("TIME", "TESTTIME1", m_csTmpString.operator const char * (), (LPTSTR)buff, 20, "SAET32.INI");
m_fTestTime1= (float)atof((LPCSTR)buff);
}
void CPSRecorderView::INI_Write()
{
CString m_csTmpString;
m_csTmpString = "NONE";
m_csTmpString.Format("%0.1f", m_fTestTime1);
WritePrivateProfileString("TIME", "TESTTIME1", m_csTmpString.operator LPCTSTR(), "SAET32.INI");
}
/*----------------------------------BMP File저장-------------------------------------*/
void CCoilView::OnSaveimg() {
CFileDialog filedlg(FALSE,"bmp",NULL,OFN_OVERWRITEPROMPT,
"BMP files (*.bmp)|*.bmp||",this);
if (filedlg.DoModal()!=IDOK)
return;
CColorBmpFile bmp;
bmp.OpenWrite(filedlg.GetPathName(),640,480);
for (int y=479; y>=0; y-=2) {
BYTE rbuffer[640],gbuffer[640],bbuffer[640];
Data->GetLine(y,rbuffer,gbuffer,bbuffer);
bmp.WriteLineUpward(rbuffer,gbuffer,bbuffer);
bmp.WriteLineUpward(rbuffer,gbuffer,bbuffer);
}
bmp.Close();
m_strMessage = "저장되었습니다.";
UpdateData(FALSE);
}
/*----------------------------------goto-------------------------------------*/
goto fail;
fail:
MessageBox(NULL,"에러 입니다.","오류",MB_OK);
return FALSE;
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 이미지 - ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
#define WIDTHBYTES(bits) ((DWORD)(((bits)+31) & (~31)) / 8)
#define WIDTHBYTES(bits) (((bits) + 31) / 32 * 4)
//======Center부터 검색 ======================================================================================
//===CenterSearch===========================
int x2=0, y2=0;
int half_x=width/2; int half_y=height/2;
float direct_y=-1; float direct_x=-1;
int Cnt_y1=0;int Cnt_y2=0;
int Cnt_x1=0;int Cnt_x2=0;
//==========================================
for(y=0; y<height-tHeight; y++)
{
//=====CenterSearch===================================
Cnt_y1++;
if(Cnt_y1>=2){Cnt_y1=0;Cnt_y2++;}
if(direct_y==1)direct_y=float(-1); else direct_y=1;
y2=int( half_y + (Cnt_y2* direct_y) );
Cnt_x1=0; Cnt_x2=0; direct_x=-1;
//===================================================
for(x=0; x<width-tWidth; x++)
{
//=====CenterSearch================================
Cnt_x1++;
if(Cnt_x1>=2){Cnt_x1=0;Cnt_x2++;}
if(direct_x==1)direct_x=float(-1); else direct_x=1;
x2=int( half_x + (Cnt_x2* direct_x) );
//=================================================
pDC.SetPixel(x2+100,y2+100,RGB(255,0,0));
}
}
//==========================================================================================================
void ReadArrayToPointBit24(BYTE * OutImg, unsigned char BufImg[768][1024], UINT width, UINT height)
{
CVisionSysView* pView =( CVisionSysView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
CDC *pDC =pView->GetDC();
//GrayImage =width*3;
//Dispay Image= ((24*width)+31)/32*4), ((DWORD)(((bits)+31) & (~31)) / 8)
//if(BufImg==NULL) return;
int x,y; int y2=0;
int nBit=0; nBit=24;
int rwsize = WIDTHBYTES(nBit*width);
int ADDr=0,ADDg=0,ADDb=0;
if(BufImg!=NULL)
{
for(y=0; y<nHeight; y++)
{
for(x=0; x<nWidth; x++)
{
y2=((height-1)-y);//-1 은 첫줄이 않나옴, y가 0일경우 문제
// y2=y;//-1 은 첫줄이 않나옴, y가 0일경우 문제
ADDr=(y2*rwsize)+(3*x)+2;
ADDg=(y2*rwsize)+(3*x)+1;
ADDb=(y2*rwsize)+(3*x)+0;
// BufRevImg[ADDr]=BufImg[y][x];
// BufRevImg[ADDg]=BufImg[y][x];
// BufRevImg[ADDb]=BufImg[y][x];
*(OutImg+ADDr)=BufImg[y][x];
*(OutImg+ADDg)=BufImg[y][x];
*(OutImg+ADDb)=BufImg[y][x];
// pDC->SetPixel(x+400,y,RGB(BufImg[ADDr],BufImg[ADDg],BufImg[ADDb]));
// pDC->SetPixel(x+400,y,RGB(BufImg[y][x],BufImg[y][x],BufImg[y][x]));
}
}
}
}
//==========================================================================================================
void CVisionSysView::OnDraw(CDC* pDC)
{
// TODO: Add your specialized code here and/or call the base class
CVisionSysDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
CMainFrame *pFrame= (CMainFrame*)AfxGetMainWnd();
ASSERT(pFrame);
/// return;
int height=m_height;int width=m_width; int Bit=m_Bit;
int rwsize = WIDTHBYTES(Bit*width);
BITMAPINFOHEADER bmiHeader;
bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
bmiHeader.biWidth = width; bmiHeader.biHeight = height;
bmiHeader.biPlanes = 1;
bmiHeader.biBitCount = Bit;
bmiHeader.biCompression = BI_RGB;
bmiHeader.biSizeImage = rwsize*height;//0;
bmiHeader.biXPelsPerMeter = 0;
bmiHeader.biYPelsPerMeter = 0;bmiHeader.biClrUsed = 0;
bmiHeader.biClrImportant = 0;// CRect rect;
CRect rect;
//=================================================================
//--Open Gray Image--
if(m_ColorGetImg!=NULL)//COLOR_IMAGE, SPOT_IMAGE, AUOT_IMAGE
{
/// CPaintDC dcView(GetDlgItem(IDC_IMG_VIEW));
/// dcView.SetStretchBltMode(STRETCH_DELETESCANS);
/// GetDlgItem(IDC_IMG_VIEW)->GetClientRect(&rect);
// StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom,
/// StretchDIBits(dcView.m_hDC,rect.left,rect.top,width,height,
// StretchDIBits(pDC->GetSafeHdc(),20,20,width,height,
// 0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
/// 0, 0,width, height, m_GrayImg, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
// SetDIBitsToDevice(pDC->GetSafeHdc(),0,0,width,height,
// 0,0,0,height,m_GrayImg,(LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS);
// DibDraw(pDC,0,0,height,width,m_ColorGetImg,24);
if(m_GrayImg!=NULL)DibDraw(pDC,0,0,height,width,m_GrayImg,Bit);
// DibDrawReverse(pDC,0,0,height,width,m_GrayImg,24);
}
//=================================================================
if(m_OutImg!=NULL)//이미지 가감 처리영상
{
int Add=640;
DibDrawArrayToBit24(pDC,0+Add,0,height,width,m_OutImg,24);
}
//=================================================================
// 마우스 드레그-템플레이트 정합을 위한 부분
if(m_flagMouse==TRUE)
{
//pDC->DrawEdge(&m_RectTrack,EDGE_ETCHED,BF_RECT);
DrawRect(pDC, m_RectTrack, RGB(0,0,255), 2);
}
if(pFrame->m_flagTemplate==TRUE) // template가 설정되어 있는 경우
{
if(m_TempImg!=NULL)
{
DibDrawBit8(pDC,width+40,0,tHeight,tWidth,m_TempImg,24);
rect.left=width+40; rect.top=0;
rect.right=rect.left+tWidth; rect.bottom=rect.top+tHeight;
DrawRect(pDC, rect, RGB(255,0,0), 2);
}
}
//==================================================================
//--이미지 검색 결과
if(!(m_MatchPos.right==0 && m_MatchPos.bottom==0))
{
if(m_bImageSearch)
{
// pDC->DrawEdge(&m_MatchPos,EDGE_BUMP,BF_RECT);
DrawRect(pDC, m_MatchPos, RGB(255,0,0), 2);
m_bImageSearch=FALSE;
}
}
//==================================================================
CClientDC pDC(this);
int width=m_width;int height=m_height;
if(m_ColorGetImg!=NULL)//COLOR_IMAGE, SPOT_IMAGE, AUOT_IMAGE
{
// CPaintDC dcView(GetDlgItem(IDC_IMG_VIEW));
// dcView.SetStretchBltMode(STRETCH_DELETESCANS);
// GetDlgItem(IDC_IMG_VIEW)->GetClientRect(&rect);
// StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom,
// StretchDIBits(dcView.m_hDC,rect.left,rect.top,width,height,
// 0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
StretchDIBits(pDC.GetSafeHdc(),20,20,width,height,
0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
// SetDIBitsToDevice(pDC->GetSafeHdc(),0,0,width,height,
// 0,0,0,height,m_ColorGetImg,(LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS);
}
//---------BMP File Save------------------------------------------------------------------------
//BMP File Save
int ImageMaxNo=1;
BITMAPINFOHEADER dibHi;
BITMAPFILEHEADER dibHf;/// CClientDC pDC(this);
int ADD1=0; int ADD2=0; int ADD3=0;
int x=0; int y=0; int y2=0;
int WidthLineSize=WIDTHBYTES(24*width);
int WidthLineSize2=WIDTHBYTES(8*width);
unsigned char *BmpOutImg=NULL;
BmpOutImg = new unsigned char [(height*ImageMaxNo)*(width*24)*3];
BmpOutImg =buf;
for(y=0; y<height*ImageMaxNo; y++) //BMP 화일로 저장 하기위해 거꾸로 저장
{
y2=((height*ImageMaxNo)-y);//-1 중요(최종 한줄 표현)
for(x=0; x<width; x++)
{
ADD1=(y2*WidthLineSize)+(3*x)+2;
ADD2=(y2*WidthLineSize)+(3*x)+1;
ADD3=(y2*WidthLineSize)+(3*x)+0;
BmpOutImg[(y2*WidthLineSize)+(3*x)+2]=buf[(y*WidthLineSize)+(3*x)+2];
BmpOutImg[(y2*WidthLineSize)+(3*x)+1]=buf[(y*WidthLineSize)+(3*x)+1];
BmpOutImg[(y2*WidthLineSize)+(3*x)+0]=buf[(y*WidthLineSize)+(3*x)+0];
// pDC->SetPixel(x+500,y,RGB(BmpOutImg[ADD1],BmpOutImg[ADD2],BmpOutImg[ADD3]));
}
}
DWORD dwBitsSize = sizeof(BITMAPINFOHEADER)+sizeof(RGBQUAD)*256+WidthLineSize*height*sizeof(char);
dibHi.biSize=40;
dibHi.biWidth=width;
dibHi.biHeight=height*ImageMaxNo;
dibHi.biPlanes=1;
dibHi.biBitCount =24;
dibHi.biCompression=BI_RGB;
dibHi.biSizeImage = 3*WidthLineSize*(height*ImageMaxNo);
dibHi.biXPelsPerMeter=0;
dibHi.biYPelsPerMeter=0;
dibHi.biClrUsed = dibHi.biClrImportant =0;
dibHf.bfType=0x4D42;
dibHf.bfSize = dwBitsSize+sizeof(BITMAPFILEHEADER); // 전체파일 크기
if(dibHi.biBitCount==24) dibHf.bfSize -= sizeof(RGBQUAD)*256; // no pallette
dibHf.bfOffBits = dibHf.bfSize - WidthLineSize*height*sizeof(char);
dibHf.bfReserved1=dibHf.bfReserved2=0;
FILE *outfile2;
CString csFile; csFile.Format("C:\\Data\\D1_Project\\두오텍\\VisionSys\\bmp\\spec.bmp");
outfile2 = fopen(csFile,"wb");
fwrite(&dibHf,sizeof(char),sizeof(BITMAPFILEHEADER),outfile2);
fwrite(&dibHi,sizeof(char),sizeof(BITMAPINFOHEADER),outfile2);
fwrite(BmpOutImg,sizeof(char),3*WidthLineSize*dibHi.biHeight,outfile2);
// fwrite(buf,sizeof(char),3*WidthLineSize*dibHi.biHeight,outfile2);
fclose(outfile2);
if(BmpOutImg) delete []BmpOutImg;
//------------------------------------------------------------------------------------------------------------------------
void CNG::OnPaint()
{
CPaintDC pDC(this); // device context for painting
// TODO: Add your message handler code here
if (m_ColorImg==NULL) return;
int height=m_height;int width=m_width;
int rwsize = WIDTHBYTES(24*width);
BITMAPINFOHEADER bmiHeader;
bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
bmiHeader.biWidth = width; bmiHeader.biHeight = height;
bmiHeader.biPlanes = 1; bmiHeader.biBitCount = 24;bmiHeader.biCompression = BI_RGB;
bmiHeader.biSizeImage = rwsize*height;//0;
bmiHeader.biXPelsPerMeter = 0;
bmiHeader.biYPelsPerMeter = 0;bmiHeader.biClrUsed = 0;
bmiHeader.biClrImportant = 0;// CRect rect;
CRect rect;
if(m_ColorImg!=NULL)//COLOR_IMAGE, SPOT_IMAGE, AUOT_IMAGE
{
CPaintDC dcView(GetDlgItem(IDC_IMAGE1));
dcView.SetStretchBltMode(STRETCH_DELETESCANS);
GetDlgItem(IDC_IMAGE1)->GetClientRect(&rect);
StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom,
// StretchDIBits(dcView.m_hDC,rect.left,rect.top,width,height,
// StretchDIBits(pDC->GetSafeHdc(),20,20,width,height,
// 0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
0, 0,width, height, m_ColorImg, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
// SetDIBitsToDevice(pDC.GetSafeHdc(),0,0,width,height,
// 0,0,0,height,m_ColorGetImg,(LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS);
}
// Do not call CDialog::OnPaint() for painting messages
}
//-----------------------------------------------------------------------------------------------------------------------
void DibDraw(CDC *pDC, int px, int py, int height, int width, BYTE *BufImg, int Bit)
{
int x,y; int y2=0;
int nBit=0; nBit=Bit;
int rwsize = WIDTHBYTES(nBit*width);//(((8*width)+31)/32*4); // 4바이트의 배수여야 함
BITMAPINFO *BmInfo;
BmInfo = (BITMAPINFO*)malloc(sizeof(BITMAPINFO)+256*sizeof(RGBQUAD));
BmInfo->bmiHeader.biBitCount=nBit;
BmInfo->bmiHeader.biClrImportant=256;//0
BmInfo->bmiHeader.biClrUsed=256;//0
BmInfo->bmiHeader.biCompression=BI_RGB;//0
BmInfo->bmiHeader.biHeight = height;
BmInfo->bmiHeader.biPlanes=1;
BmInfo->bmiHeader.biSize=40;//=sizeof(BITMAPINFOHEADER);
if(nBit==24)
BmInfo->bmiHeader.biSizeImage=rwsize*height*3;
else
BmInfo->bmiHeader.biSizeImage=rwsize*height;
BmInfo->bmiHeader.biWidth =width;
BmInfo->bmiHeader.biXPelsPerMeter=0;
BmInfo->bmiHeader.biYPelsPerMeter=0;
for(x=0; x<256; x++) // Palette number is 256
{
BmInfo->bmiColors[x].rgbRed= BmInfo->bmiColors[x].rgbGreen = BmInfo->bmiColors[x].rgbBlue = x;
BmInfo->bmiColors[x].rgbReserved = 0;
}
if(nBit==24)
{
int ADDr=0,ADDg=0,ADDb=0;
int ADDr2=0,ADDg2=0,ADDb2=0;
unsigned char *BufRevImg = new unsigned char [(width*24)*height*3];
/*
if(BufImg!=NULL)
{
for(y=0; y<height; y++)
{
for(x=0; x<width; x++)
{
y2=((height-1)-y);//-1 은 첫줄이 않나옴, y가 0일경우 문제
ADDr=(y*rwsize)+(3*x)+2;
ADDg=(y*rwsize)+(3*x)+1;
ADDb=(y*rwsize)+(3*x)+0;
ADDr2=(y2*rwsize)+(3*x)+2;
ADDg2=(y2*rwsize)+(3*x)+1;
ADDb2=(y2*rwsize)+(3*x)+0;
BufRevImg[ADDr]=BufImg[ADDr2];
BufRevImg[ADDg]=BufImg[ADDg2];
BufRevImg[ADDb]=BufImg[ADDb2];
// pDC->SetPixel(x+400,y,RGB(BufImg[ADDr],BufImg[ADDg],BufImg[ADDb]));
}
}
}
*/
int ImgSize=(width*24)*height*3;//int ImgSize=(width*8)*height;//8
memcpy(BufRevImg,BufImg,ImgSize);
// SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
// 0,0,0,height,BufImg,(LPBITMAPINFO)&dibHi, DIB_RGB_COLORS);
// SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
// 0,0,0,height,BufImg,BmInfo, DIB_RGB_COLORS);
SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
0,0,0,height,BufRevImg,BmInfo, DIB_RGB_COLORS);
delete []BufRevImg;
}
else
{
unsigned char *BufRevImg = new unsigned char [height*rwsize];
int index1,index2=0;
for(y=0; y<height; y++)
{
index1 = y*rwsize;
index2 = (height-y-1)*width;
// index2 = y*width;
for(x=0; x<width; x++)
{
BufRevImg[index1+x]=BufImg[index2+x];
// pDC->SetPixel(j,i,RGB(BufImg[index2+x],BufImg[index2+x],BufImg[index2+x]));
}
}
SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
0,0,0,height,BufRevImg,BmInfo, DIB_RGB_COLORS);
delete []BufRevImg;
}
}
//-----------------------------------------------------------------------------------------------------------------------
void CNG::AX_LoadJPG(CString fileName)
{
UINT width=427; UINT height=601;
if (m_ColorGetImg!=NULL) {delete [] m_ColorGetImg;m_ColorGetImg=NULL;}
if (m_ColorImg!=NULL) {delete [] m_ColorImg;m_ColorImg=NULL;}
m_ColorImg = new unsigned char [(width*24)*height*3];
// read to buffer tmp
m_ColorGetImg=JpegFile::JpegFileToRGB(fileName, &width, &height);
//CString csTmp; csTmp.Format("%d, %d",width, height); AfxMessageBox(csTmp);
//-------------------------------------------------------
if(m_ColorGetImg==NULL){return;}
//-------------------------------------------------------
JpegFile::BGRFromRGB(m_ColorGetImg, width, height);
// vertical flip for display
JpegFile::VertFlipBuf(m_ColorGetImg, width * 3, height);
m_width=width; m_height=height;
int y=0;
int x=0;
int ADD1,ADD2,ADD3;
int SUM1,SUM2,SUM3;
#define WIDTHBYTES2(bits) (float((bits) / float(32)) * 4)
float rwsize=WIDTHBYTES2(24*(width));//이미지 Size홀수 문제
int rwsize2=WIDTHBYTES(24*(width));
for(y=0; y<int(height); y++)
{
for(x=0; x<int(width); x++)
{
ADD1=int((y*rwsize)+(3*x)+2);
ADD2=int((y*rwsize)+(3*x)+1);
ADD3=int((y*rwsize)+(3*x)+0);
SUM1=int((y*rwsize2)+(3*x)+2);
SUM2=int((y*rwsize2)+(3*x)+1);
SUM3=int((y*rwsize2)+(3*x)+0);
m_ColorImg[SUM1]=m_ColorGetImg[ADD1];
m_ColorImg[SUM2]=m_ColorGetImg[ADD2];
m_ColorImg[SUM3]=m_ColorGetImg[ADD3];
//pDC.SetPixel(nX,nY,RGB(m_ColorImg[SUM1],m_ColorImg[SUM2],m_ColorImg[SUM3]));
}
}
}
//--------------------------------------------------------------------------------------------
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - POINT - /////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
//======MEMCPY 생성=======================================================================
unsigned char *OutImg = NULL;
// OutImg = new unsigned char [(nWidth*Bit)*nHeight*3];
OutImg = (unsigned char*)calloc(nWidth*Bit*nHeight*3,sizeof(char));
BYTE *outBuf=NULL;
long bufsize = (long)w * 3 * (long)h;
outBuf=(BYTE *) new BYTE [bufsize];
outBuf=NULL;
outBuf = new unsigned char [bufsize]; //dibHi.biSizeImage
// outBuf=(BYTE *) new BYTE [bufsize];
//======MEMCPY============================================================================
int ImgSize=(width*24)*height*3;//24
// int ImgSize=(width*8)*height;//8
memcpy(BufImg,BufImg2,ImgSize);
//======unsigned char,UINT * nWidth=======================================================
UINT * nWidth, UINT * nHeight
BYTE * BufImg;
BufImg=NULL;
BufImg = new unsigned char [ImgSize]; //dibHi.biSizeImage
*nHeight = NULL;
*nWidth = NULL;
*nHeight=height;
*nWidth=width;
CVisionSysView* pView =( CVisionSysView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
CDC *pDC =pView->GetDC();
//----------------------------------
int rwsize = WIDTHBYTES(24*width);
int ADDr,ADDg,ADDb;
//----------------------------------
int x=0; int y=0;
for(y=0; y<height; y++)
{
for(x=0; x<width; x++)
{
ADDr=(y*rwsize)+(3*x)+2;
ADDg=(y*rwsize)+(3*x)+1;
ADDb=(y*rwsize)+(3*x)+0;
*(BufImg+ADDr)=BufImg2[ADDr]; // r
*(BufImg+ADDg)=BufImg2[ADDg]; // g
*(BufImg+ADDb)=BufImg2[ADDb]; // b
pDC->SetPixel(x+400,y,RGB(BufImg[ADDr],BufImg[ADDg],BufImg[ADDb]));
//pDC->SetPixel(col,row,RGB(pixel[2],pixel[1],pixel[0]));
}
}
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////// - 함 수 - /////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
int (*StepFunc_1[])(void) =
{
iCall_ChipTakeOff, iCall_LaserMeasure,
iCall_MarkRecMove, iCall_AllMarkRec,
iCall_AllBadRec, iCall_TargetMarkRec,
iCall_XYMovAbsorb1, iCall_XYMovAbsorb2,
iCall_NzlAbsorbOp1, iCall_NzlAbsorbOp2,
iCall_XYMountMov1, iCall_XYMountMov2,
iCall_NzlMountOp1, iCall_NzlMountOp2,
iCall_AlignMoveXY1, iCall_AlignMoveXY2,
iCall_InspectMoveXY1, iCall_InspectMoveXY2,
iCall_AlignRecogOP1, iCall_AlignRecogOP2,
iCall_InspectRecogOP1, iCall_InspectRecogOP2,
iCall_NzlFocusReset1, iCall_NzlFocusReset2
};
if ((*StepFunc_1[index])() == NG) // 실행 error이면
TaskStatus1.iError = TaskStatus1.iNum; // main분기 data
else // 실행성공이면
TaskStatus1.iError = OK;
extern int iCall_LaserMeasure(void);
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////// - 문 자 - /////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
//8888888888888888888888888888888888888888888888888888888888888
//--------데이타 형 -----------------------------
short int, int -2(15) ~ 2(15)-1 -32768~32767
long int -2(31) ~ 2(31)-1 -2147483648 ~ 2147483647
unsigned short int 0 ~2(15)-1 0 ~ 65535
unsigned int
unsigned long int 0 ~2(32)-1 0 ~ 4294967295
float 10(-79) ~ 10(75)
char -128 ~ 127
unsigned char 0 ~ 255
//------------------------------------------------------
char 8
int 16
short 16
long 32
float 32
double 64
//-----------------------------------------------------
UINT-unsigned int
BYTE -unsigned char
LPSTR -char
(LPSTR) char*
LPTSTR -unsigned short
LPCTSTR -CString
//--------------------------
BOOL A Boolean value.
BSTR A 32-bit character pointer.
BYTE An 8-bit integer that is not signed.
COLORREF A 32-bit value used as a color value.
DWORD A 32-bit unsigned integer or the address of a segment and its associated offset.
LONG A 32-bit signed integer.
LPARAM A 32-bit value passed as a parameter to a window procedure or callback function.
LPCSTR A 32-bit pointer to a constant character string.
LPSTR A 32-bit pointer to a character string.
LPCTSTR A 32-bit pointer to a constant character string that is portable for Unicode and DBCS.
LPTSTR A 32-bit pointer to a character string that is portable for Unicode and DBCS.
LPVOID A 32-bit pointer to an unspecified type.
LRESULT A 32-bit value returned from a window procedure or callback function
UINT A 16-bit unsigned integer on Windows versions 3.0 and 3.1; a 32-bit unsigned integer on Win32.
WNDPROC A 32-bit pointer to a window procedure.
WORD A 16-bit unsigned integer.
WPARAM A value passed as a parameter to a window procedure or callback function: 16 bits on Windows versions 3.0 and 3.1; 32 bits on Win32.
Data types unique to the Microsoft Foundation Class Library include the following:
POSITION A value used to denote the position of an element in a collection; used by MFC collection classes.
LPCRECT A 32-bit pointer to a constant (nonmodifiable) RECT structure.
//888888888888888888888888888888888888888888888888888888888888888888888888888
_CRTIMP int __cdecl abs(int);
_CRTIMP double __cdecl acos(double);
_CRTIMP double __cdecl asin(double);
_CRTIMP double __cdecl atan(double);
_CRTIMP double __cdecl atan2(double, double);
_CRTIMP double __cdecl cos(double);
_CRTIMP double __cdecl cosh(double);
_CRTIMP double __cdecl exp(double);
_CRTIMP double __cdecl fabs(double);
_CRTIMP double __cdecl fmod(double, double);
_CRTIMP long __cdecl labs(long);
_CRTIMP double __cdecl log(double);
_CRTIMP double __cdecl log10(double);
_CRTIMP double __cdecl pow(double, double);
_CRTIMP double __cdecl sin(double);
_CRTIMP double __cdecl sinh(double);
_CRTIMP double __cdecl tan(double);
_CRTIMP double __cdecl tanh(double);
_CRTIMP double __cdecl sqrt(double);
double hypot(double x,double y);직삼각형의 사변 길이
double sqrt(double x);x의 제곱근
double pow(double x,double y);xy. x의 y승
double log(double x);자연 대수
double log10(double x);상용 대수
double exp(double x);자연 대수 exp
//=============================================================
/*---------------------- 형 변형 ----------------------------*/
//=============================================================
//---------------
double "%.1e"
long int "%ld"
//---------------
/*---------------------- Char 문자로 변경----------------------------*/
DWORD dData
char Data[33] = "\0";
ultoa(dData, Data, 10);
CString sRtn = Data;
CString csText;
char buff[40];
csText=((LPCSTR)buff);
//---메모리할당 삭제----------------------------------
CString str;
char *cstr=NULL;str = new char[_MAX_PATH+1];
::GetCurrentDirectory(_MAX_PATH+1,cstr);
str=(LPCTSTR)(char *)cstr;
if(cstr)delete[] cstr;
return str;
//-----------------------------------------------------
char *str;
CString Path_App =(LPCTSTR)(char *)str;
//-----------------------------------------------------------
(char *)(LPCTSTR)mDAT.pid,day.yy%100,day.mo,day.dd);
//-----------------------------------------------------------
//-----------------------------------
(LPCTSTR)(char *)
//-----------------------------------
/*---------------------- lstrcpy----------------------------*/
CString m_strSend;
BYTE temp[2000];
lstrcpy((LPSTR)temp,(LPSTR)m_strSend.operator const char*());
/*---------------------- sprintf----------------------------*/
char buff[100];
int nData=100;
sprintf(buff, "%d", nData);
/*---------------------- int--------------------------------*/
int a=111;
sprintf(temp,"%d",a);
char buff[40];
int nData;
nData=(int)atoi((LPCSTR)buff);
///////////////////////////////
short number;
CString str;
char buffer[20];
if (number > 0) {
_itoa(number,buffer,10);
str += buffer;
}
str += "\r"; //CR
/*-------------------문자-> float 변경------------------------*/
CString csTmp;
float fHum;
fHum = (float)atof((LPCSTR)csTmp);
*-------------------float-> 문자 변경------------------------*/
float fData=(float) 12.345;
CString csText;
csText.Format("%.3f",fData);
/*-------------------문자-> long 변경------------------------------*/
long lngBuf = ::atol(strBuf);
/*------------------- long-> 문자 변경-----------------------------*/
long lData=1123;
CString csTmp; csTmp.Format("%ld",lData);
*-------------------double-> 문자 변경------------------------------*/
CString csText;
double dData;
csText.Format("%-13.2f",dData);
/*--------------------일정문자 삭제--------------------------------*/
CString csRead;
csRead.Delete(5,1);
위치,갯수
/*------------------일정문자 추출-----------------------------------*/
CString InString;
CString csTemp = InString.Mid(index+1,6);
위치 , 크기
/*------------float 반올림------------------------------------------*/
#define Cut(A) (float)((long int) (((A)+.05) * 10))/10;
float Test1=(float)2.374826;
float Test2;
Test2=Cut(Test1);
csTest.Format("%.6f",Test2);
m_nisFM1LCoolRpmDecision.SetOffText(csTest);
/*------HEX and 비교구문-------------------------------------------*/
int test1=0;
test1 |=0x4000;
test1 |=0x02;
if (test1 & 0x4000)
{
if ((test1 & 2)==0)
{
AfxMessageBox("!0x02");
}
else
{
AfxMessageBox("0x02");
}
}
else
{
AfxMessageBox("!0x4000");
}
/*------------상위 4비트만 추출 -----------------------------------*/
BYTE m_nInHorseTmp;
BYTE Intemp;
m_nInHorseTmp=0X7f;
// m_nInHorseTmp |= 0X0f;
m_nInHorseTmp &= 0Xf0;
Intemp=m_nInHorseTmp/16;
m_TEST.Format("%d",Intemp);
UpdateData(FALSE);
/*------------------------핵사값-> 십진수-------------------------*/
int no;
CString n,m_NoData ;
char buf[4]; buf[0]='0';buf[1]='A';buf[2]='2';buf[3]='B';
char data[4];
for(int s=0; s<4; s++)
{
data[s] = buf[i];
}
no=AscHextoAscDec(data);
n.Format("%d",no);
m_NoData = n;
/*-----------------------AscHextoAscDec----------------------------*/
int CFileTestView::AscHextoAscDec(char hexnum[])
{
/* int dec;
dec = (int)hex-48;
if(dec>9)
dec=dec-7;
return dec;
*/
int i=0;
int Num[4],Sum;
for(i=0; i<4; i++)
{
if(hexnum[i]>0x40)
Num[i]=hexnum[i]-'A'+10;
else
Num[i]=hexnum[i]-'0';
}
Sum=Num[0]*16*16*16 + Num[1]*16*16 + Num[2]*16 + Num[3];
return Sum;
}
/*---------------------- 십진수-> 핵사------------------*/
int NUM;
CString m_NoData;
NUM=162; ///핵사값=A2
BYTE temp[3];
temp[0] = HextoAsc(NUM/16);
temp[1] = HextoAsc(NUM%16);
temp[2] = '\0';
m_NoData=temp;
/*-----------------------HextoAsc-----------------------*/
BYTE CFileTestView::HextoAsc(BYTE hexnum)
{
unsigned char hex[] = { "0123456789ABCDEF" };
unsigned char ascnum;
ascnum = hex[hexnum%16];
return ascnum;
}
/*-----------------ASC-> 정수변환-----------------------*/
int NanBangData;
TCHAR NanBang[5];
NanBang[0] = pDoc->m_RsrBuf[9];
NanBang[1] = pDoc->m_RsrBuf[10];
NanBang[2] = pDoc->m_RsrBuf[11];
NanBang[3] = pDoc->m_RsrBuf[12];
NanBang[4] = '\0';
NanBangData = atoi(NanBang);
/*--------------------Format----------------------------*/
int NO[4];
CString n;
NO=0x31;
n.Format("%d%d%d%d",NO[0],NO[0],NO[0],NO[0]);
no=atoi(n);
m_NoData = n;
if(no==2100){m_NoData="aa";}
else{m_NoData ="bb";}
/*--------------------- strcat---------------------------*/
char string[80];
char temp2[20];
strcpy( string, "Hello world from " );
strcat( string, "1 " );
strcat( string, "2 " );
strcat( string, "!" );
sprintf(temp2,"%s\n",string);
AfxMessageBox(temp2);
/*-----------------strok----------------------------------*/
char seps[] = ","; char *token; char string[250];
///*** Establish string and get the first token:
strcpy( string, ReadData); token = strtok(string, seps );
char string[] = " 1 2 \n3,4,,,,,,end";
char s
eps[] = " ,\t\n";
//char seps[] = ",";
char *token;
////////*** Establish string and get the first token:
token = strtok( string, seps );
char temp2[20];
while( token != NULL )
{
//////*** While there are tokens in "string"
sprintf(temp2,"%s",token);
AfxMessageBox(temp2);
///////*** Get next token:
token = strtok( NULL, seps );
}
//----------------------------------------------------
char *data;
char szBuf[1024];
CString InString="OK11,123,250,125";
sprintf(szBuf,InString);
data = strtok(szBuf,",");
AfxMessageBox(data);
data = strtok(NULL,",");
AfxMessageBox(data);
data = strtok(NULL,",");
AfxMessageBox(data);
data = strtok(NULL,",");
AfxMessageBox(data);
//------------------------------------------
char string[] = "IMAGE1,IMAGE2,IMAGE3,IMAGE11,IMAGE4,IMAGE20";
//char seps[] = " ,\t\n";
char seps[] = ",";
char *token;
////////*** Establish string and get the first token:
token = strtok( string, seps );
char temp2[20];
while( token != NULL )
{
//////*** While there are tokens in "string"
sprintf(temp2,"%s",token);
AfxMessageBox(temp2);
///////*** Get next token:
token = strtok( NULL, seps );
}
/*--------------------strlen--------------------------------*/
char temp2[20];
char buffer[61] = "How";
int len;
len = strlen( buffer );
// sprintf(temp2,"%d",len);
sprintf(temp2,"%s",buffer);
AfxMessageBox(temp2);
/*---------------------- int--------------------------------*/
int a=111;
sprintf(temp,"%d",a);
/*------------문자 위치(길이) 결과 얻어내기------------------------------------*/
InString="12345678+000 END";
index = InString.Find("END");//END의 위치 값 0 ~ END 정수 값
csText.Format("%d",index);
AfxMessageBox(csText);
index = InString.Find("+");
m_csTmpString=InString.Left(index+2);//index 위치+2 까지 문자 얻음
AfxMessageBox(m_csTmpString);
/*-----------지정 위치 문자 얻어 내기 --String.GetAt(n)--------------------------------------*/
int Length2 = NamBangDataBuf.GetLength();
for(int n = 0; n < Length2; n++)
{
buf2[n] = NamBangDataBuf.GetAt(n);
}
buf2[n] = '\0';
n 위치의 문자를 얻어냄
/*--------------------------------------------------------------
index = InString.Find("+");//15
while(index>=0)
{
m_csTmpString=InString.Left(index+2);//"+"위치 + 2 위치 문자얻음 "," 까지
InString =InString.Right(InString.GetLength()-index-2); //전체에서 LEFT뺀 나머지 문자
OneChar = m_csTmpString.GetAt(0); //0
index = m_csTmpString.Find("N"); //4
WAV[0] = m_csTmpString.GetAt(index-4); //V
WAV[1]=NULL;
// csText.Format("%d",nI);
// AfxMessageBox(csText);
OneChar = m_csTmpString.GetAt(index-1); //3번 위치의 "1" 얻음
tmp[0]=OneChar;
tmp[1]=NULL; //temp= "1";
nI=atoi(tmp);
/*--------------------------대문자로 바꿈--------------------------------*/
CString Buf1;
Buf1="abcdef";
Buf1.MakeUpper();
AfxMessageBox(Buf1);
/*-------------------------일부 문자 뽑아 내기--------------------------*/
CString csTmp,InString;
InString="#SNDATAok-aa#END";
csTmp=FindData(InString, "#SN",'#');
AfxMessageBox(csTmp);
결과=DATAok-aa
CString CSECSystemView::FindData(CString csData, CString csFind, TCHAR OneChar)
{
int length,index,index2;
CString csTmp,csTmpData;
index = csData.Find(csFind);//MODEL_INFO
length = csFind.GetLength();
csTmpData=csData.Right(csData.GetLength() - index - 1);
index2 = csTmpData.Find(OneChar);//MODEL_INFO
csTmp = csData.Mid(length+index,index2+1-length);
// csData.Format("index=%d",index2);
if((index < 0)||(index2 < 0)) return _T("");
else return csTmp;
}
/*------------------------핵사값-> 십진수-------------------------*/
int no;
CString n,m_NoData ;
char buf[4]; buf[0]='0';buf[1]='A';buf[2]='2';buf[3]='B';
char data[4];
for(int s=0; s<4; s++)
{
data[s] = buf[i];
}
no=AscHextoAscDec(data);
n.Format("%d",no);
m_NoData = n;
//-------------------------------------------------------------------//
BYTE CHexAscChangeView::AsctoHex(BYTE ascnum)
{
unsigned char hex[] = { "0123456789ABCDEF" };
unsigned char i=0;
do
{
if(hex[i] == ascnum)
{
return i;
}
i++;
}while(i<16);
return 0;
}
/*-----------------------AscHextoAscDec----------------------------*/
int CFileTestView::AscHextoAscDec(char hexnum[])
{
/* int dec;
dec = (int)hex-48;
if(dec>9)
dec=dec-7;
return dec;
*/
int i=0;
int Num[4],Sum;
for(i=0; i<4; i++)
{
if(hexnum[i]>0x40)
Num[i]=hexnum[i]-'A'+10;
else
Num[i]=hexnum[i]-'0';
}
Sum=Num[0]*16*16*16 + Num[1]*16*16 + Num[2]*16 + Num[3];
return Sum;
}
/*---------------------- 십진수-> 핵사-------------------*/
int NUM;
CString m_NoData;
NUM=162; ///핵사값=A2
BYTE temp[3];
temp[0] = HextoAsc(NUM/16);
temp[1] = HextoAsc(NUM%16);
temp[2] = '\0';
m_NoData=temp;
/*-----------------------HextoAsc-----------------------*/
BYTE CFileTestView::HextoAsc(BYTE hexnum)
{
unsigned char hex[] = { "0123456789ABCDEF" };
unsigned char ascnum;
ascnum = hex[hexnum%16];
return ascnum;
}
/*-----------------ASC-> 정수변환-----------------------*/
int NanBangData;
TCHAR NanBang[5];
NanBang[0] = pDoc->m_RsrBuf[9];
NanBang[1] = pDoc->m_RsrBuf[10];
NanBang[2] = pDoc->m_RsrBuf[11];
NanBang[3] = pDoc->m_RsrBuf[12];
NanBang[4] = '\0';
NanBangData = atoi(NanBang);
/*--------------------Format----------------------------*/
int NO[4];
CString n;
NO=0x31;
n.Format("%d%d%d%d",NO[0],NO[0],NO[0],NO[0]);
no=atoi(n);
m_NoData = n;
if(no==2100){m_NoData="aa";}
else{m_NoData ="bb";}
/*--------------------- strcat---------------------------*/
char string[80];
char temp2[20];
strcpy( string, "Hello world from " );
strcat( string, "1 " );
strcat( string, "2 " );
strcat( string, "!" );
sprintf(temp2,"%s\n",string);
AfxMessageBox(temp2);
/*-----------------strok----------------------------------*/
char string[] = " 1 2 \n3,4,,,,,,end";
char seps[] = " ,\t\n";
//char seps[] = ",";
char *token;
////////*** Establish string and get the first token:
token = strtok( string, seps );
char temp2[20];
while( token != NULL )
{
//////*** While there are tokens in "string"
sprintf(temp2,"%s",token);
AfxMessageBox(temp2);
///////*** Get next token:
token = strtok( NULL, seps );
}
/*--------------------strlen--------------------------------*/
char temp2[20];
char buffer[61] = "How";
int len;
len = strlen( buffer );
// sprintf(temp2,"%d",len);
sprintf(temp2,"%s",buffer);
AfxMessageBox(temp2);
Measure_r= hypot(fPoint_x,fPoint_y);
Measure_r=sqrt(fPoint_x*fPoint_x+fPoint_y*fPoint_y);
//---CString To Byte (unsigned char)------------------------------------------
BYTE c_str(CString str, int n)
{
BYTE cDt;
int nSize=0;
nSize=str.GetLength();
if(nSize>=n)
{
cDt= str.GetAt(n);
}
return cDt;
}
//------------------------------------------------------------------------------
CString str;
BYTE temp;
for(int i=0; i<6; i++)
{
str.Format("%d : ",i);
if(c_str(name,i)=='3')
AfxMessageBox(str+"ok");
else
AfxMessageBox(str);
}
//------------------------------------------------------------------------------
//char 문자변형 !!!!!!!!!!!!!!!!!!!!
BYTE temp[2];
temp[0]=(c_str(name,i);
temp[1]='\0';
str=(LPSTR)temp;
AfxMessageBox(str);
/*---------------------------------------------------------*/
/*----------------------HEX 8BIT 문자표현----------------------------------------*/
CString CSECKLineDVM2View::Hext8BitAsctoChange(int CheckSum)
{
CString csHiBit,csLowBit,csResult;
char HiBit;
char LowBit;
HiBit=(CheckSum & 0xf0)/16;
LowBit=CheckSum & 0x0f;
csHiBit=HextoAsc(HiBit);
csLowBit=HextoAsc(LowBit);
csResult=csHiBit+csLowBit;
return csResult;
}
BYTE CModuleAgingView::HextoAsc(BYTE hexnum)
{
unsigned char hex[] = { "0123456789ABCDEF" };
unsigned char ascnum;
int nBuf=0;
nBuf=hexnum%16;
if((nBuf>=0)&&(nBuf<=15))
{
ascnum = hex[hexnum%16];
}
else
{
ascnum =0;
}
return ascnum;
}
/*----------------------HEX 분할 표현----------------------------------------*/
long dAddress=4294967295; //FF FF FF FF
NAddress[3]=long((lAddress&0xff000000)>>24);
NAddress[2]=long((lAddress&0x00ff0000)>>16);
NAddress[1]=long((lAddress&0x0000ff00)>>8);
NAddress[0]=long(lAddress&0x000000ff);
unsigned char Command[]={NAddress[3],NAddress[2],NAddress[1],NAddress[0]}; //81-Command, 00 08- Data Size 8Byte
pFrame->m_serial[PORT_MODULE_A-1].Write(Command,4);
/*----------------------HEX 232전송----------------------------------------*/
unsigned char *BinOutImg;
BinOutImg = NULL; //변경전 Image file size
BinOutImg = new unsigned char [3*WidthLineSize*(PaletteSize_y*ImageMaxNo)];
Data[0]=int(BinOutImg[index+0]);
unsigned char Buf1[]={Data[0]};
pFrame->m_serial[port-1].Write(Buf1,1);
Data[1]=int(BinOutImg[index+1]);
unsigned char Buf2[]={Data[1]};
pFrame->m_serial[port-1].Write(Buf2,1);
/*----------------------String Table 얻기----------------------------------------*/
CString strTemp;
if (strTemp.LoadString(IDS_SERVERRESET))
/*----------------------한글 폰트 얻기 / 출력------------------------------------*/
const char KoreanFont_MOUM_A1[14][3] = {
"각","간","갇","갈","감","갑","갓","강","갖","갗",
"갘","같","갚","갛",
};
CString csData;
BYTE temp[3];
temp[0] = KoreanFont_MOUM_A1[1][0];
temp[1] = KoreanFont_MOUM_A1[1][1];
temp[2] = '\0';
csData=temp;
AfxMessageBox(csData);
/*----------------------사이즈가 수시변동 끝 네자리 얻기------------------------*/
CString strTmp=_T("");
CString strTmp2=_T("");
CString csData="EX-4A21";
int nLotSize=0;
strTmp=csData;
if(strTmp.GetLength()>0)
{
nLotSize=strTmp.GetLength();
if(nLotSize>=4)
{
for(int i=nLotSize-4; i<nLotSize; i++)
{
strTmp2+=strTmp.Mid(i,1);
}
}
}
if(strTmp2.GetLength()==4)
{
AfxMessageBox(strTmp2);
}
/*---------------------- Delete------------------------*/
CString csRead;
int nNo;
csRead.Delete(nNo,1);
//=============================================================
//=============================================================
//====입력 문자중 숫자만 체크=================================
bool AsctoHexChk(CString csNo)
{
if(csNo=="")return false;
int Length = csNo.GetLength();
if(Length<=0)return false;
BYTE No;
bool chk=true;
for(int i=0; i<Length; i++)
{
No=csNo.GetAt(i);
if(!AsctoHex(No))chk=false;
}
return chk;
}
bool AsctoHex(BYTE ascnum)
{
unsigned char hex[] = { "0123456789." };
unsigned char i=0;
bool Chk=false;
do
{
if(hex[i] == ascnum)
{
Chk=true; break;
}
i++;
}while(i<11);
return Chk;
}
//====한정 문자 메세지 ==========================================
const char BOARD1[MAX_BD][10]= {
"DZ1","DX1","DY1","DZ2","DX2","DY2","FX1","FY1",};
CLabelControl *pLabel;
for(int i=0; i<MAX_BD; i++)
{
pLabel = (CLabelControl *)GetDlgItem(IDC_LBL_AXIS_X+i);
pLabel->SetWindowText(LPTSTR(BOARD1[i]));
}
//====리스트 사용하기============================================
typedef struct {
CString MarkID;
int MarkNo;
int Registered;
int iLight[3];
} MARKDATA_RECORD;
CList<MARKDATA_RECORD, MARKDATA_RECORD&> m_list;
void CMarkData::Load()
{
Clear();
MARKDATA_RECORD rec;
CString strSection;
CIniFile iniFile("C:\\MountData\\MarkData\\Mark.lib");
int count = iniFile.ReadInt("Mark Library", "Count");
for (int i=1; i<=count; i++) {
strSection.Format("Mark #%02d", i);
rec.MarkID = iniFile.ReadString(strSection, "Mark ID");
m_list.AddTail(rec);
}
}
void CMarkData::Save()
{
MARKDATA_RECORD rec;
POSITION pos;
CString strSection;
int count = GetCount();
CIniFile iniFile("C:\\MountData\\MarkData\\Mark.lib");
iniFile.WriteInt("Mark Library", "Count", count);
for (int i=0; i<count; i++) {
pos = m_list.FindIndex(i);
rec = m_list.GetAt(pos);
iniFile.WriteDouble(strSection, "OuterDiameter", rec.OuterDiameter);
}
}
void CMarkData::Clear()
{
m_list.RemoveAll();
}
MARKDATA_RECORD CMarkData::GetData(int index)
{
ASSERT(index > 0 && index <= m_list.GetCount());
POSITION pos = m_list.FindIndex(index-1);
MARKDATA_RECORD rec = m_list.GetAt(pos);
return rec;
}
bool CMarkData::InsertBlankData(int index)
{
ASSERT(index > 0 && index <= m_list.GetCount()+1);
MARKDATA_RECORD rec;
rec.MarkID.Empty();
rec.MarkNo = 0;
rec.Registered = 0;
rec.iLight[0] = 1;
rec.iLight[1] = 1;
rec.iLight[2] = 1;
if (index > m_list.GetCount()) {
m_list.AddTail(rec);
}
else {
POSITION pos = m_list.FindIndex(index-1);
m_list.InsertBefore(pos, rec);
}
return true;
}
//___________________________________________________________________________
void CMarkData::DeleteData(int index)
{
if (index < 0 || index > m_list.GetCount()) return;
POSITION pos = m_list.FindIndex(index-1);
m_list.RemoveAt(pos);
}
//===========================================================================
//===========================================================================
void CMarkData::SetData(int index, MARKDATA_RECORD rec)
{
ASSERT(index > 0 && index <= m_list.GetCount());
POSITION pos = m_list.FindIndex(index-1);
m_list.SetAt(pos, rec);
}
//====struct=================================================================
//typedef struct tagBLOBDATA { short ltx, lty, rbx, rby; int n, pc; float cx, cy, r, g, b, u02, u20, u11, m, v; } BLOBDATA;
//---------------------------------------------------------------------------
//====Point Reutn============================================================
//%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
BYTE * BMPFile::LoadBMP(CString fileName,UINT *width, UINT *height)
{
BYTE *outBuf=NULL;
long bufsize = (long)w * 3 * (long)h;
outBuf=(BYTE *) new BYTE [bufsize];
for (int col=0;col<w;col++)
{
long offset = col * 3;
char pixel[3];
if (fread((void *)(pixel),1,3,fp)==3)
{
// we swap red and blue here
*(outBuf + rowOffset + offset + 0)=pixel[2]; // r
*(outBuf + rowOffset + offset + 1)=pixel[1]; // g
*(outBuf + rowOffset + offset + 2)=pixel[0]; // b
}
}
int w;
int h;
*width=w;
*height=h;
return outBuf;
}
//===========================================================================
BYTE * BMPFile::LoadBMP(CString fileName,
UINT *width,
UINT *height)
{
BITMAP inBM;
BYTE m1,m2;
long filesize;
short res1,res2;
long pixoff;
long bmisize;
long compression;
unsigned long sizeimage;
long xscale, yscale;
long colors;
long impcol;
BYTE *outBuf=NULL;
// for safety
*width=0; *height=0;
// init
m_errorText="OK";
m_bytesRead=0;
FILE *fp;
fp=fopen(fileName,"rb");
if (fp==NULL) {
CString msg;
msg="Can't open file for reading :\n"+fileName;
m_errorText=msg;
return NULL;
} else {
long rc;
rc=fread((BYTE *)&(m1),1,1,fp); m_bytesRead+=1;
if (rc==-1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((BYTE *)&(m2),1,1,fp); m_bytesRead+=1;
if (rc==-1) m_errorText="Read Error!";
if ((m1!='B') || (m2!='M')) {
m_errorText="Not a valid BMP File";
fclose(fp);
return NULL;
}
////////////////////////////////////////////////////////////////////////////
//
// read a ton of header stuff
rc=fread((long *)&(filesize),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((int *)&(res1),2,1,fp); m_bytesRead+=2;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((int *)&(res2),2,1,fp); m_bytesRead+=2;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(pixoff),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(bmisize),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(inBM.bmWidth),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(inBM.bmHeight),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((int *)&(inBM.bmPlanes),2,1,fp); m_bytesRead+=2;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((int *)&(inBM.bmBitsPixel),2,1,fp); m_bytesRead+=2;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(compression),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(sizeimage),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(xscale),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(yscale),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(colors),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
rc=fread((long *)&(impcol),4,1,fp); m_bytesRead+=4;
if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}
////////////////////////////////////////////////////////////////////////////
// i don't do RLE files
if (compression!=BI_RGB) {
m_errorText="This is a compressed file.";
fclose(fp);
return NULL;
}
if (colors == 0) {
colors = 1 << inBM.bmBitsPixel;
}
////////////////////////////////////////////////////////////////////////////
// read colormap
RGBQUAD *colormap = NULL;
switch (inBM.bmBitsPixel) {
case 24:
break;
// read pallete
case 1:
case 4:
case 8:
colormap = new RGBQUAD[colors];
if (colormap==NULL) {
fclose(fp);
m_errorText="Out of memory";
return NULL;
}
int i;
for (i=0;i<colors;i++) {
BYTE r,g,b, dummy;
rc=fread((BYTE *)&(b),1,1,fp);
m_bytesRead++;
if (rc!=1) {
m_errorText="Read Error!";
delete [] colormap;
fclose(fp);
return NULL;
}
rc=fread((BYTE *)&(g),1,1,fp);
m_bytesRead++;
if (rc!=1) {
m_errorText="Read Error!";
delete [] colormap;
fclose(fp);
return NULL;
}
rc=fread((BYTE *)&(r),1,1,fp);
m_bytesRead++;
if (rc!=1) {
m_errorText="Read Error!";
delete [] colormap;
fclose(fp);
return NULL;
}
rc=fread((BYTE *)&(dummy),1,1,fp);
m_bytesRead++;
if (rc!=1) {
m_errorText="Read Error!";
delete [] colormap;
fclose(fp);
return NULL;
}
colormap[i].rgbRed=r;
colormap[i].rgbGreen=g;
colormap[i].rgbBlue=b;
}
break;
}
if ((long)m_bytesRead>pixoff) {
fclose(fp);
m_errorText="Corrupt palette";
delete [] colormap;
fclose(fp);
return NULL;
}
while ((long)m_bytesRead<pixoff) {
char dummy;
fread(&dummy,1,1,fp);
m_bytesRead++;
}
int w=inBM.bmWidth;
int h=inBM.bmHeight;
// set the output params
*width=w;
*height=h;
long row_size = w * 3;
long bufsize = (long)w * 3 * (long)h;
////////////////////////////////////////////////////////////////////////////
// alloc our buffer
outBuf=(BYTE *) new BYTE [bufsize];
if (outBuf==NULL) {
m_errorText="Memory alloc Failed";
} else {
////////////////////////////////////////////////////////////////////////////
// read it
long row=0;
long rowOffset=0;
// read rows in reverse order
for (row=inBM.bmHeight-1;row>=0;row--) {
// which row are we working on?
rowOffset=(long unsigned)row*row_size;
if (inBM.bmBitsPixel==24) {
for (int col=0;col<w;col++) {
long offset = col * 3;
char pixel[3];
if (fread((void *)(pixel),1,3,fp)==3) {
// we swap red and blue here
*(outBuf + rowOffset + offset + 0)=pixel[2]; // r
*(outBuf + rowOffset + offset + 1)=pixel[1]; // g
*(outBuf + rowOffset + offset + 2)=pixel[0]; // b
}
}
m_bytesRead+=row_size;
// read DWORD padding
while ((m_bytesRead-pixoff)&3) {
char dummy;
if (fread(&dummy,1,1,fp)!=1) {
m_errorText="Read Error";
delete [] outBuf;
fclose(fp);
return NULL;
}
m_bytesRead++;
}
} else { // 1, 4, or 8 bit image
////////////////////////////////////////////////////////////////
// pixels are packed as 1 , 4 or 8 bit vals. need to unpack them
int bit_count = 0;
UINT mask = (1 << inBM.bmBitsPixel) - 1;
BYTE inbyte=0;
for (int col=0;col<w;col++) {
int pix=0;
// if we need another byte
if (bit_count <= 0) {
bit_count = 8;
if (fread(&inbyte,1,1,fp)!=1) {
m_errorText="Read Error";
delete [] outBuf;
delete [] colormap;
fclose(fp);
return NULL;
}
m_bytesRead++;
}
// keep track of where we are in the bytes
bit_count -= inBM.bmBitsPixel;
pix = ( inbyte >> bit_count) & mask;
// lookup the color from the colormap - stuff it in our buffer
// swap red and blue
*(outBuf + rowOffset + col * 3 + 2) = colormap[pix].rgbBlue;
*(outBuf + rowOffset + col * 3 + 1) = colormap[pix].rgbGreen;
*(outBuf + rowOffset + col * 3 + 0) = colormap[pix].rgbRed;
}
// read DWORD padding
while ((m_bytesRead-pixoff)&3) {
char dummy;
if (fread(&dummy,1,1,fp)!=1) {
m_errorText="Read Error";
delete [] outBuf;
if (colormap)
delete [] colormap;
fclose(fp);
return NULL;
}
m_bytesRead++;
}
}
}
}
if (colormap) {
delete [] colormap;
}
fclose(fp);
}
return outBuf;
}
//=================================================================================================================
BYTE* CMemFile::Alloc(DWORD nBytes)
{
return (BYTE*)malloc((UINT)nBytes);
}
BYTE *buf = JpegFile::JpegFileToRGB(....);
delete [] buf;
BYTE * JpegFile::JpegFileToRGB(CString fileName, UINT *width, UINT *height)
{
*width=0;
*height=0;
BYTE *dataBuf;
dataBuf=(BYTE *)new BYTE[width * 3 * height];
if (dataBuf==NULL) {
return NULL;
}
return dataBuf;
}
BYTE * JpegFile::MakeDwordAlignedBuf(BYTE *dataBuf,UINT widthPix,UINT height, UINT *uiOutWidthBytes)
{
////////////////////////////////////////////////////////////
// what's going on here? this certainly means trouble
if (dataBuf==NULL)return NULL;
////////////////////////////////////////////////////////////
// how big is the smallest DWORD-aligned buffer that we can use?
UINT uiWidthBytes;
uiWidthBytes = WIDTHBYTES(widthPix * 24);
DWORD dwNewsize=(DWORD)((DWORD)uiWidthBytes * (DWORD)height);
BYTE *pNew;
////////////////////////////////////////////////////////////
// alloc and open our new buffer
pNew=(BYTE *)new BYTE[dwNewsize];
if (pNew==NULL) {
return NULL;
}
////////////////////////////////////////////////////////////
// copy row-by-row
UINT uiInWidthBytes = widthPix * 3;
UINT uiCount;
for (uiCount=0;uiCount < height;uiCount++) {
BYTE * bpInAdd;
BYTE * bpOutAdd;
ULONG lInOff;
ULONG lOutOff;
lInOff=uiInWidthBytes * uiCount;
lOutOff=uiWidthBytes * uiCount;
bpInAdd= dataBuf + lInOff;
bpOutAdd= pNew + lOutOff;
memcpy(bpOutAdd,bpInAdd,uiInWidthBytes);
}
*uiOutWidthBytes=uiWidthBytes;
return pNew;
}
BOOL JpegFile::VertFlipBuf(BYTE * inbuf,
UINT widthBytes,
UINT height)
{
BYTE *tb1;
BYTE *tb2;
if (inbuf==NULL)
return FALSE;
UINT bufsize;
bufsize=widthBytes;
tb1= (BYTE *)new BYTE[bufsize];
if (tb1==NULL) {
return FALSE;
}
tb2= (BYTE *)new BYTE [bufsize];
if (tb2==NULL) {
delete [] tb1;
return FALSE;
}
UINT row_cnt;
ULONG off1=0;
ULONG off2=0;
for (row_cnt=0;row_cnt<(height+1)/2;row_cnt++) {
off1=row_cnt*bufsize;
off2=((height-1)-row_cnt)*bufsize;
memcpy(tb1,inbuf+off1,bufsize);
memcpy(tb2,inbuf+off2,bufsize);
memcpy(inbuf+off1,tb2,bufsize);
memcpy(inbuf+off2,tb1,bufsize);
}
delete [] tb1;
delete [] tb2;
return TRUE;
}
BOOL JpegFile::MakeGrayScale(BYTE *buf, UINT widthPix, UINT height)
{
if (buf==NULL)
return FALSE;
UINT row,col;
for (row=0;row<height;row++) {
for (col=0;col<widthPix;col++) {
LPBYTE pRed, pGrn, pBlu;
pRed = buf + row * widthPix * 3 + col * 3;
pGrn = buf + row * widthPix * 3 + col * 3 + 1;
pBlu = buf + row * widthPix * 3 + col * 3 + 2;
// luminance
int lum = (int)(.299 * (double)(*pRed) + .587 * (double)(*pGrn) + .114 * (double)(*pBlu));
*pRed = (BYTE)lum;
*pGrn = (BYTE)lum;
*pBlu = (BYTE)lum;
}
}
return TRUE;
}
//============================================================================
//--------Bit 구하기- -----------------------------
typedef struct {
unsigned b0 : 1, b1 : 1, b2 : 1, b3 : 1, b4 : 1, b5 : 1, b6 : 1, b7 : 1;
} byte_bits;
typedef union {
BYTE bByte;
byte_bits bit;
} lsByte;
lsByte bUnivIO;
bUnivIO=(UINT8)250;
#include "Led.h"
CLed m_LedOut0;
DDX_Control(pDX, IDC_LED_OUT0, m_LedOut0);
m_LedOut0.SetStatus( bUnivIO.bit.b0 );
m_LedOut1.SetStatus( bUnivIO.bit.b1 );
m_LedOut2.SetStatus( bUnivIO.bit.b2 );
m_LedOut3.SetStatus( bUnivIO.bit.b3 );
m_LedIn0.SetStatus( bUnivIO.bit.b4 );
m_LedIn1.SetStatus( bUnivIO.bit.b5 );
m_LedIn2.SetStatus( bUnivIO.bit.b6 );
m_LedIn3.SetStatus( bUnivIO.bit.b7 );
int CUDPSock::SendTo(const void* lpBuf, int nBufLen, LPCTSTR lpszHostAddress, int nFlags)
{
sockaddr_in Addr;
memset((char *)&Addr, 0x00, sizeof(Addr));
Addr.sin_family = AF_INET;
Addr.sin_addr.s_addr = inet_addr(lpszHostAddress);
Addr.sin_port = htons(m_iPort);//서버,클라이언트중 port지정한 UDP port로 송수신(내부서버에지정)
char *buf = NULL;
int iSize = lstrlen((char*)lpBuf);
buf = (char*)malloc(iSize);
memcpy(buf,lpBuf,iSize);
//CUDPSock::DATAPACKET DataPacket;
//memcpy(DataPacket.szData, (char*)lpBuf, nBufLen);
//DataPacket.SetCheck();
//int iResult = sendto(m_Sock, (char*)&DataPacket, sizeof(CUDPSock::DATAPACKET), nFlags, (const struct sockaddr *)&Addr, sizeof(Addr));
int iResult = sendto(m_Sock, buf, iSize, nFlags, (const struct sockaddr *)&Addr, sizeof(Addr));
return 0;
}
//---------------------------------------------------------------------------
//-----특정 문자 바꾸기 -----------------------------------
CString PathName.Replace( "\\", "/" );
//-----확장자 바꾸기---------------------------------------
CString ChangeFileExt(CString csFile, CString csExe)
{
CString str;
int Index=0;
char *token;
char szBuf[1024];
char temp2[100];
char seps[] = "\\";
////////*** Establish string and get the first token:
if(csFile.GetLength()>3)printf(szBuf,csFile); else return "";
CString csGetData="";
sprintf(szBuf,csFile);
token = strtok(szBuf,seps);
while( token != NULL )
{
//////*** While there are tokens in "string"
sprintf(temp2,"%s",token);
csGetData=temp2;
///////*** Get next token:
token = strtok( NULL, seps );
}
int index=0;
if(csGetData.GetLength()>1)index = csGetData.Find("."); else return "";
CString csData="";
csData=csGetData.Mid(0,index);// AfxMessageBox(csData);
str=csData+csExe;
return str;
}
//----------------------------------------------------------
CString NewFileName;
char sSource[256]
//찾고자 하는것, 바꾸고자 하는것을 받는다.
strcpy( sSource, m_FileNameBefore.operator LPCTSTR() );
//----------------------------------------------------------
unsigned char *temp = NULL;
temp = new unsigned char [Length];
CString Filename=="C:\\Polaronix\\Back\\Ch01\\*.*";
//-------------------
LPSTR temp = Filename.GetBuffer(Filename.GetLength()*2); //*char
//-------------------
char temp[50];
for(i=0; i<50; i++) temp[i]='\0';
lstrcpy((LPSTR)temp,(LPSTR)Filename.operator const char*());
//--------------------
char temp[50];
int Length = Filename.GetLength();
//for(i=0; i<50; i++) temp[i]='\0';
for(i = 0; i < Length; i++)
{
temp[i] = Filename.GetAt(i);
}
temp[i]= '\0';
AfxMessageBox(temp);
unsigned char Buf1[]={Data[0]};
pFrame->m_serial[port-1].Write(Buf1,1);
//-----------------------------------------------------------------------------------
//------숫자 감소--------------------------------------------------------------------
for (i = 255; i > 0; i--)
//-----------------------------------------------------------------------------------
//--unsigned char-> CString , unsigned char-> char----------------------------------
//-----------------------------------------------------------------------------------
int Length=255;
unsigned char *temp = NULL;
temp = new unsigned char [Length];
char temp2[2]; CString csText;
// m_ccEdit1.GetWindowText((LPSTR)temp,255);
for(int i=0; i<Length; i++)
{
temp2[0]=temp[i]; temp2[1]='\0';
csText+=(LPSTR)temp2;
}
AfxMessageBox(csText);
//-----------------------------------------------------------------------------------
//------숫자 추출--------------------------------------------------------------------
100자리
hundred= (int)(Sum/ 100);
ten= (Sum-(hundred*100))/10;
one=Sum-((hundred*100)+(ten*10));
1000자리
thousand= =(int)(Sum/ 1000);
hundred= (int)(Sum-(thousand*1000))/100;
ten= (Sum-((thousand*1000)+(hundred*100)))/10;
one=Sum-(int)((thousand*1000)+(hundred*100)+(ten*10));
10000자리
tenthousand =(int)(Sum/ 10000);
thousand= (int)(Sum-(tenthousand*10000))/1000;
hundred= (int)(Sum-((tenthousand*10000)+(thousand*1000)+(hundred*100)))/100;
ten= (Sum-((tenthousand*10000)+(thousand*1000)+(hundred*100)))/10;
one=Sum-(int)((tenthousand*10000)+(thousand*1000)+(hundred*100)+(ten*10));
//---char-> CString------------------------------------
char temp[255];
for(int i=0; i<255; i++) temp[i]='\0';
CString csText=(LPSTR)temp;
AfxMessageBox(csText);
//---------------*.* 삭제 처리-------------------------------------------------*/
CString Filename="C:\\Polaronix\\Back\\Ch01\\*.*";
int Length = Filename.GetLength();
char temp[50];
for(i=0; i<50; i++) temp[i]='\0';
lstrcpy((LPSTR)temp,(LPSTR)Filename.operator const char*());
SHFILEOPSTRUCT sfo;
memset(&sfo,0,sizeof(sfo));
sfo.wFunc = FO_DELETE;
sfo.fFlags =OFN_SHOWHELP; //메시지 창 뛰우지 않음
sfo.pFrom=(LPSTR)temp;
SHFileOperation(&sfo);
/* for(i = 0; i < 20; i++)
{
csTmp.Format("%d",temp[i]); AfxMessageBox(csTmp);
}
*/
/*------% 계산------------------------------------------------------------*/
//-------------------------------------------
//-------------------------------------------
0-255 에 대한 100%
// 수량에 대한 % 계산 x(%)
// 255 : 100(%) = 25 : x(%) (25의 %)
// x(%) = (value/255)*100
int value=25;
float fData=float(value)/255;fData=float(fData*100);if(fData<0)fData=0;
// %에 대한 수량 구하기 x(no)
// 255 : 100(%) = x :10(%) (10%에 대한 값)
// x=(10/100)*255
//int value=10;
//float fData=float(value/100);fData=float(fData*255);if(fData<0)fData=0;
fData=float(fData)/100;fData=float(fData*255); //Limit값
fData=Cut(fData); m_threshMin=int(fData);
//-------------------------------------------
//-------------------------------------------
float nData1=0;int nData2=0;
// nData1=nImageTotalSize-(nAddressCount*256);
nData1=nImageTotalSize-nAddressCount;
nData2=int((nData1/nImageTotalSize)*100);
nPercent=int(100-nData2);
strText.Format("Image Download: %d/100",nPercent);//Pallete X Size
SetDlgItemText(IDC_IMAGEDOWNLOADSTATIC_A, strText);
if((nPercent>=0)&&(nPercent<=100))
m_ccModuleAdownloadProgress.SetPos(nPercent);
/*-----------------------------------------------------------------------*/
BOOL AFXAPI AfxVerifyLicFile(HINSTANCE hInstance, LPCTSTR pszLicFileName,
LPCOLESTR pszLicFileContents, UINT cch)
{
// Assume the worst...
BOOL bVerified = FALSE;
// Look for license file in same directory as this DLL.
TCHAR szPathName[_MAX_PATH];
::GetModuleFileName(hInstance, szPathName, _MAX_PATH);
LPTSTR pszFileName = _tcsrchr(szPathName, '\\') + 1;
lstrcpy(pszFileName, pszLicFileName);
#ifndef OLE2ANSI
LPSTR pszKey = NULL;
#endif
LPBYTE pbContent = NULL;
TRY
{
// Open file, read content and compare.
CFile file(szPathName, CFile::modeRead);
if (cch == -1)
#ifdef OLE2ANSI
cch = lstrlen(pszLicFileContents);
#else
cch = wcslen(pszLicFileContents);
pszKey = (char*)_alloca(cch*2 + 1);
cch = _wcstombsz(pszKey, pszLicFileContents, cch*2 + 1);
#endif
if (cch != 0)
{
--cch; // license file won't contain the terminating null char
pbContent = (BYTE*)_alloca(cch);
file.Read(pbContent, cch);
#ifndef OLE2ANSI
if (memcmp(pszKey, pbContent, (size_t)cch) == 0)
#else
if (memcmp(pszLicFileContents, pbContent, (size_t)cch) == 0)
#endif
bVerified = TRUE;
}
}
END_TRY
return bVerified;
}
/*---------------------Hex -> CString------------------------------------------------------*/
void CTestView::OnButton1()
{
// TODO: Add your control notification handler code here
CString csTmp="";
char hexnum=0x7f; //BYTE hexnum=0x01;
csTmp=HextoAsctoString(hexnum);
AfxMessageBox(csTmp);
}
CString CTestView::HextoAsctoString(BYTE hexnum)
{
CString csTmp="0";
unsigned char hex[] = { "0123456789ABCDEF" };
BYTE num;
BYTE temp[3];
num=hexnum/16;
temp[0] = hex[num%16];
num=hexnum%16;
temp[1] =hex[num%16];
temp[2] = '\0';
csTmp=temp;
return csTmp;
}
/*---------------------CString 한줄씩 얻기 ----------------------------------*/
//-----------------------------------------------------------------------------------
//----한줄 얻기--------------------------------
CString csData="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20";
int MaxRow = MAXROW_TIME+1;
int MaxCol = MAXCOL_TIME;
CString csTmp="";
int nGetCol=1;
if(nMode==MODE_ONTIME)nGetCol=1;if(nMode==MODE_OFFTIME)nGetCol=2;
int nListMaxCount=0;CString csGetData[MAXROW_TIME];
LPTSTR pstr;LPTSTR pstrToken;
TCHAR seps[] =_T(",");
pstr=csData.GetBuffer(0);
pstrToken=_tcstok(pstr,seps);
while(pstrToken !=NULL)
{
if(nListMaxCount<MaxRow){csGetData[nListMaxCount]=pstrToken;AfxMessageBox(csGetData[nListMaxCount],MB_OK);}
pstrToken=_tcstok(NULL,seps);
nListMaxCount++;
}
csData.ReleaseBuffer(-1);
//----여러 줄 얻기------------------------------------
// CString str =_T("First\tSecond Third,Fourth\t Fifth");
CString str =_T("100,200,\n300,45.0\n");
// CString str= m_csTestFileData[0];
CString csdata="";
int nListMaxCount=0;
LPTSTR pstr;
LPTSTR pstrToken;
// TCHAR seps[] =_T("\t, ");
TCHAR seps[] =_T("\n");
pstr=str.GetBuffer(0);
pstrToken=_tcstok(pstr,seps);
while(pstrToken !=NULL)
{
// AfxMessageBox(pstrToken,MB_OK);
pstrToken=_tcstok(NULL,seps);
if(pstrToken!=NULL)
{
char seps[] = ","; char *token; char string[250];
///*** Establish string and get the first token:
strcpy( string, pstrToken); token = strtok(string, seps );
csdata="";csdata=token;
// Data-0
AfxMessageBox(csdata);
int nCount=0;
while( token != NULL )
{
token = strtok( NULL, seps );
csdata="";csdata=token;
//Data-1
if(nCount==0)
AfxMessageBox(csdata);
csdata="";csdata=token;//csdata=csdata+"\n";
//Data-2
if(nCount==1)
AfxMessageBox(csdata);
nCount++;
}
nListMaxCount++;
}
}
str.ReleaseBuffer(-1);
AfxMessageBox(pstr, MB_OK);
//------------@(0x40) MASK-----------------------------------------------------------------
//MASK 0100 0000 0x40
//100 0000 0000 0110 0100 (0100 0000) (0100 0000) (0100 0110) (0100 0100) @@FD
//12300 0011 0000 0000 1100 (0100 0011) (0100 0000) (0100 0000) (0100 1100) C@@L
//-----------------------------------------------------------------------------------------
/*---------------------일정간격의 Board 번호와 Ch 번호 구하기 ----------------------------------*/
int nBoardNo=0;
int nChNo=0;
int nMax= CHMAX/12;
int nChMax=12;
CString csTmp="";
if(m_nTestSendCh<nChMax){nChNo=m_nTestSendCh;} //0-11 12ch
else
{
for(int i=1; i<nMax; i++)
{
nBoardNo=m_nTestSendCh/(12*i);
if(nBoardNo<12)break;
}
nChNo=m_nTestSendCh-(12*nBoardNo);
}
csTmp.Format("No%d, nBoard%d, Ch%d",m_nTestSendCh,nBoardNo,nChNo);
AfxMessageBox(csTmp);
m_nTestSendCh++;
/*----------------------반올림 -----------------------------------------------*/
#define Cut(A) (float)((long int) (((A)+.05) * 10))/10;
#define Cut2(A) (float)((long int) (((A)+.5) * 10))/10;
/*----------------------퍼센트 구하기 ----------------------------------------*/
// 100 : 80(환산 기준치)
// 퍼센트 50 구하기
// (50/100)*80
// (50*0.01)*80
int nPercent=(m_ccChModel[nCh].m_SCROLLPERCENT*0.01)*m_ccChModel[nCh].m_PALETTE_SIZE_X;
100퍼센트
(측정값/기준값)*100
/*--------------------------------------------------------------------------------*/
char temp[80];
lstrcpy((LPSTR)temp,(LPSTR)pDlg->m_strIp.operator const char*());
//-------------------------------------------------------------//
BYTE temp[200];
CString csText="[0](@@,0B)";
lstrcpy((LPSTR)temp,(LPSTR)csText.operator const char*());
//클라이언트에 보낸다.
m_pClientSock->Send(temp,200);
CString csText;
char buff[40];
csText=((LPCSTR)buff);
const char Error_message[4][40] = {
"Comm Data Receive Error ",
"Image Download Error ",
"MPU Control Error ",
"Comm Error ",
};
/*---------------------- COleDateTime------------------------*/
CString csWorkTime;
COleDateTime ccTestTime;
ccTestTime=COleDateTime::GetCurrentTime();
csWorkTime=ccTestTime.Format("%I:%M:%S %p");
ccTestTime.Format("%Y %m %d %H:%M");
//--
COleDateTime tmpDateTime = COleDateTime::GetCurrentTime();
String strTime;
strTime.Format("%4d.%02d.%02d/%02d:%02d:%02d",
tmpDateTime.GetYear(), tmpDateTime.GetMonth(),tmpDateTime.GetDay(),
tmpDateTime.GetHour(),tmpDateTime.GetMinute(), tmpDateTime.GetSecond());
//--
CString strTime;
COleDateTime tmpDateTime = COleDateTime::GetCurrentTime();
strTime.Format("%4d_%02d_%02d_%02d_%02d_%02d_Err.txt",
tmpDateTime.GetYear(), tmpDateTime.GetMonth(),tmpDateTime.GetDay(),
tmpDateTime.GetHour(),tmpDateTime.GetMinute(), tmpDateTime.GetSecond());
m_csErrorFileName=strTime;
//-------------------------------------------------------------------------------------------
int MaxRow = MAXRAW+1;
int MaxCol = MAXCOL;
CString cs=""; CString csTmp="";
int col=3;
if(m_bSendAllCheck){m_bSendAllCheck=FALSE; cs="OK";}
else{m_bSendAllCheck=TRUE;cs="-";}
for (int row = 1; row < MaxRow; row++) {
csTmp=m_GridCtrl.GetItemText(row, 1);
if(csTmp!="")
{
m_GridCtrl.SetItemFormat(row, col, DT_CENTER|DT_VCENTER|DT_SINGLELINE);
m_GridCtrl.SetItemText(row, col, cs);
}
}
m_GridCtrl.Invalidate();
//--------------------------------------------------------------------------------------------
BOOL CXYSystemView::FileDataUpdate_RGB_Percent()
{
__int16 length, exist;
char str[200];
int index=0;
int nListMaxCount=0;
FILE *fp ;
CString filename=_T("");
CString ReadData=_T("");
CString strTmp=_T("");
CString data=_T("");
BOOL bFileCheck=false;
BOOL bFileCheck2=false;
filename = CSRGBPercentFileName;
exist = access(filename,0);
if (!exist && (fp = fopen(filename,"rt")) != NULL) {
while (!feof(fp)) {
ReadData.Empty();
if ( fgets(str, 200, fp) != NULL) { // error Return NULL
ReadData.Format("%s", str);
length = ReadData.GetLength();
if(bFileCheck2==false)//처움에만 찾기
{
index = ReadData.Find("#SETUP$");
if(index>=0){bFileCheck=true; index=0; }
else{AfxMessageBox("Save Data Not Find!"); break;}
}
index = ReadData.Find("\t");
if(index>=0)
{
ReadData.Format("%s", ReadData.Mid(0 , length-2));
}
else
{
ReadData.Format("%s", ReadData.Mid(0 , length-1));
}
if(ReadData=="#ENDEQ$"){break;}
if(bFileCheck)
{
if(bFileCheck2)
{
if(nListMaxCount>=CHMAX){AfxMessageBox("Posion X Save File Error!!");break;}
if(ReadData!="")
{
// char seps[] = " ,\t\n";
char seps[] = ",";
char *token;
char string[250];
////////*** Establish string and get the first token:
strcpy( string, ReadData);
token = strtok(string, seps );
int nCount=0;
while( token != NULL )
{
///////*** Get next token:
token = strtok( NULL, seps );
if(nCount==0)
FRGB_Percent_R[nListMaxCount]=atof(token);
if(nCount==1)
FRGB_Percent_G[nListMaxCount]=atof(token);
if(nCount==2)
FRGB_Percent_B[nListMaxCount]=atof(token);
if(nCount==3)
FRGB_Percent_Gray[nListMaxCount]=atof(token);
nCount++;
}
nListMaxCount++;
}
}
}
bFileCheck2=true;//처움에만 찾기
}
}
/// fclose(fp);
} else {
// SendDlgItemMessage(IDC_STATIC_WLREM, WM_SETTEXT,0,(LPARAM)(LPSTR)"DATA NONE");
// AfxMessageBox("File Data Not Find! "+CSCHRunTimeFileName);
FileDataSave_RGB_Percent();
return FALSE;
}
fclose(fp);return TRUE;
}
//-------------------------------------------------------------------------------------
//-------------------------------------------------------------------------------------
// 화일 디렉토리중 화일명만 추출하기
//-------------------------------------------------------------------------------------
//-------------------------------------------------------------------------------------
CString FileNameGet_token(CString csRead)
{
char *token;
char szBuf[1024];
char seps[] = "\\";
////////*** Establish string and get the first token:
//CString InString="C:\\DMX\\Bmp\\Field_R.bmp";
CString InString=csRead;
if(InString.GetLength()==0)return "";
sprintf(szBuf,InString);
CString csGetData="";
token = strtok(szBuf,seps);
char temp2[20]; int Index=0;
while( token != NULL )
{
//////*** While there are tokens in "string"
sprintf(temp2,"%s",token);
csGetData=temp2;
///////*** Get next token:
token = strtok( NULL, seps );
}
int index=0;
if(csGetData.GetLength()>0)index = csGetData.Find("."); else return "";
CString csData="";
csData=csGetData.Mid(0,index); //AfxMessageBox(csData);
return csData;
}
//---------------------------------------------------------------------------------
/*-------------십진수값 자리분할 각각의 해당 자리수 버퍼에 저장----------------*/
//------------------------------------------
if(Sum>0)
{
hundred= (int)(Sum/ 100);
ten= (Sum-(hundred*100))/10;
one=Sum-((hundred*100)+(ten*10));
}
//------------------------------------------
int i,Sum,thousand,hundred,ten,one,Count;
Sum=thousand=hundred=ten=one=Count=0;
char Rpm[4];
char RpmBuf[4];
for(i=0; i<4; i++)
{
Rpm[i]=0;
RpmBuf[i]=0;
}
Sum=6234;
for(i=0; i<Sum; i++)
{
Count++;
if(Count==10)
{
Count=0;
ten++;
if(ten==10)
{
hundred++;
ten=0;
if(hundred==10)
{
thousand++;
hundred=0;
}
}
}
}
one=Sum-((thousand*1000)+(hundred*100)+(ten*10));
Rpm[0]=thousand;
Rpm[1]=hundred;
Rpm[2]=ten;
Rpm[3]=one;
CString Data;
Data.Format("%d%d%d%d",Rpm[0],Rpm[1],Rpm[2],Rpm[3]);
m_TestEdit=Data;
UpdateData(FALSE);
/*---------------------테스트 모드가 ON 모드만 테스트----------------*/
CString csTmp1,csTmp2;
csTmp1="#";
if(ccModel.nMode1==TRUE)
{
csTmp1+="1";
}
if(ccModel.nMode2==TRUE)
{
csTmp1+="2";
}
if(ccModel.nMode3==TRUE)
{
csTmp1+="3";
}
int index = csTmp1.Find("#");//15
int set[8];
int Length = csTmp1.GetLength();
for(int i=0; i<Length; i++)
{
set[i]=atoi(csTmp1.Mid(index+i,1));
}
for(int n=0; n<Length; n++)
{
TestMode(set[n]);
}
// csTmp2.Format("%d",set[2]);
// AfxMessageBox(csTmp2);
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 이미지 - ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
//------MIL LIBRARY------------------------------------------------//
MIL_ID MilSystem
MIL_ID MilDisplay
MIL_ID MilImage, /* Image buffer identifier.*/
MilOverlayImage; /* Overlay image. */
/* Restore the model image and display it */
MbufRestore(SINGLE_MODEL_IMAGE, MilSystem, &MilImage);
//------------------------------------------------------
// 윈도우 창 디스플레이
///MdispSelect(MilDisplay, MilImage);
//Picture Box 상속 디스플레이
Handle[0]= ((CWnd*)GetDlgItem(IDC_CAM1))->GetSafeHwnd();
MdispSelectWindow(MilDisplay, MilImage, Handle[0]);
//------------------------------------------------------
//------Gray 변경------------------------------------------------//
float r, g, b, gray;
r=m_pTestBitmap[ADD1]/255.0f;
g=m_pTestBitmap[ADD2]/255.0f;
b=m_pTestBitmap[ADD3]/255.0f;
RGBToGrayMul(r,g,b,&gray);
gray= (unsigned char)(gray*255.0);
//++++++++++++++++++++++++++++
if(gray > 100)//이미지 검출값
//++++++++++++++++++++++++++++
//++++++++++++++++++++++++++++
//----------------------------------------------------------------------------------------
//Image 수평 분할 display
/* CClientDC pDC(this);
int Add_x,Add_y=0;
int DivisionRate= PaletteSize_y*5;
if(m_bPaletteChange)
{
for(y=0; y<PaletteSize_y+8; y++)
{
for(x=0; x<PaletteSize_x+8; x++)
{
// pDC.SetPixel(x+BMP_START_EDGE_X1-10,y+BMP_START_EDGE_Y1-10,RGB(122,123,102));
pDC.SetPixel(x+BMP_START_EDGE_X1-4,y+BMP_START_EDGE_Y1-4,RGB(122,123,102));
}
}
m_bPaletteChange=FALSE;
}
else
{
for(y=0; y<PaletteSize_y*ImageMaxNo; y++)
{
for(x=0; x<PaletteSize_x; x++)
{
if(y<DivisionRate)
{
pDC.SetPixel(x+BMP_START_EDGE_X1,y+BMP_START_EDGE_Y1,RGB(255,255,255));
}
else
{
Add_x= PaletteSize_x*(y/DivisionRate)+(y/DivisionRate)*10;
Add_y=DivisionRate*(y/DivisionRate);
pDC.SetPixel((x+BMP_START_EDGE_X1)+Add_x,(y+BMP_START_EDGE_Y1)-Add_y,RGB(255,255,255));
}
}
}
}
//Image를 다섯개씩 분할 수평으로 디스플레이
for(y=0; y<PaletteSize_y*ImageMaxNo; y++)
{
for(x=0; x<PaletteSize_x; x++)
{
if(y<DivisionRate)
{
pDC.SetPixel(x+BMP_START_EDGE_X1,y+BMP_START_EDGE_Y1,RGB(m_DisplayImg_A[(y*WidthLineSize)+(3*x)+2],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+1],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+0]));
}
else
{
Add_x= PaletteSize_x*(y/DivisionRate)+(y/DivisionRate)*10;
Add_y=DivisionRate*(y/DivisionRate);
pDC.SetPixel((x+BMP_START_EDGE_X1)+Add_x,(y+BMP_START_EDGE_Y1)-Add_y,RGB(m_DisplayImg_A[(y*WidthLineSize)+(3*x)+2],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+1],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+0]));
}
}
}
//-------------------------------------------------------------------------------------------------
*/
/*
//-----------------------------------------------------------------------------------
//Binary File Save
//----------------------------------------------
// R G B 3Byte를 2Byte로 변환
// 00000000 00000000
// 11111 R -5비트 32 256/8
// 111 111 G -6비트 64 256/4
// 11111 B -5비트 32 256/8
//----------------------------------------------
//(128x(96*ImageNo))*2 한 픽셀 표현 2바이트 ,이미지 저장할 파일 사이즈
int ImageFileSize=(PaletteSize_x*(PaletteSize_y*ImageMaxNo)*2);
unsigned char *BinOutImg;
BinOutImg = NULL; //변경전 Image file size
BinOutImg = new unsigned char [3*WidthLineSize*(PaletteSize_y*ImageMaxNo)];
index=0; n=0;
for(y=0; y<PaletteSize_y*ImageMaxNo; y++)
{
for(x=0; x<PaletteSize_x; x++)
{
index=n*2;
BinOutImg[index+0]=(((OutImg[(y*WidthLineSize)+(3*x)+2])/8)<<3)|(((OutImg[(y*WidthLineSize)+(3*x)+1])/4)>>3);
BinOutImg[index+1]=(((OutImg[(y*WidthLineSize)+(3*x)+1])/4)<<5)|(((OutImg[(y*WidthLineSize)+(3*x)+0])/8));
n++;
}
}
FILE *outfile;
CString csImageFile;
csImageFile.Format("C:\\ModuleAging\\Bin\\%d.bin",PaletteSize_x);
outfile = fopen(csImageFile,"wb");
fwrite(BinOutImg,sizeof(char),ImageFileSize,outfile);
fclose(outfile);
if(BinOutImg) delete []BinOutImg;
//-----------------------------------------------------------------------------------
//BMP File Save
unsigned char *BmpOutImg=NULL;
BmpOutImg = new unsigned char [(PaletteSize_y*ImageMaxNo)*(PaletteSize_x*24)*3];
for(y=0; y<PaletteSize_y*ImageMaxNo; y++) //BMP 화일로 저장 하기위해 거꾸로 저장
{
y2=((PaletteSize_y*ImageMaxNo)-y);//-1 중요(최종 한줄 표현)
for(x=0; x<PaletteSize_x; x++)
{
BmpOutImg[(y2*WidthLineSize)+(3*x)+2]=OutImg[(y*WidthLineSize)+(3*x)+2];
BmpOutImg[(y2*WidthLineSize)+(3*x)+1]=OutImg[(y*WidthLineSize)+(3*x)+1];
BmpOutImg[(y2*WidthLineSize)+(3*x)+0]=OutImg[(y*WidthLineSize)+(3*x)+0];
}
}
DWORD dwBitsSize = sizeof(BITMAPINFOHEADER)+sizeof(RGBQUAD)*256+WidthLineSize*PaletteSize_y*sizeof(char);
dibHi.biWidth=PaletteSize_x;
dibHi.biHeight=PaletteSize_y*ImageMaxNo;
dibHi.biBitCount =24;
dibHi.biSizeImage = 3*WidthLineSize*(PaletteSize_y*ImageMaxNo);
dibHi.biClrUsed = dibHi.biClrImportant =0;
dibHf.bfType=0x4D42;
dibHf.bfSize = dwBitsSize+sizeof(BITMAPFILEHEADER); // 전체파일 크기
if(dibHi.biBitCount==24) dibHf.bfSize -= sizeof(RGBQUAD)*256; // no pallette
dibHf.bfOffBits = dibHf.bfSize - WidthLineSize*PaletteSize_y*sizeof(char);
dibHf.bfReserved1=dibHf.bfReserved2=0;
FILE *outfile2;
csImageFile.Format("C:\\ModuleAging\\EquipSys\\%d.bmp",PaletteSize_x);
outfile2 = fopen(csImageFile,"wb");
fwrite(&dibHf,sizeof(char),sizeof(BITMAPFILEHEADER),outfile2);
fwrite(&dibHi,sizeof(char),sizeof(BITMAPINFOHEADER),outfile2);
fwrite(BmpOutImg,sizeof(char),3*WidthLineSize*dibHi.biHeight,outfile2);
fclose(outfile2);
if(BmpOutImg) delete []BmpOutImg;
*/
/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 그래픽 - ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/
CDC memDC;
CBitmap memBmp,*pOldBmp;
memDC.CreateCompatibleDC( &dc );
memBmp.CreateCompatibleBitmap( &dc,m_rectWindow.Width(),m_rectWindow.Height() );
pOldBmp = (CBitmap*)memDC.SelectObject( &memBmp );
if( memDC.GetSafeHdc() != NULL )
{ // memDC에 그린다..
memDC.BitBlt( 0,0,m_rectWindow.Width(),m_rectWindow.Height(),&m_memBackDC, 0,0,SRCCOPY ); // 그리기
memDC.BitBlt(
dc.BitBlt( 0,0, nWidth, nHeight, &memDC, 0, 0, SRCCOPY ); // Main DC에 옮겨 쓰기
}
memDC.SelectObject( pOldBmp );
//######################
http://www.ucancode.net
//######################
//-------------------------------------------------------------------
BOOL Ellipse(int x1, int y1, int x2, int y2);
//-------------------------------------------------------------------
BOOL RoundRect(int x1, int y1, int x2, int y2, int x3, int y3);
BOOL RoundRect(PCRECT lpRect, POINT point);
When this member function executes, the rectangle is drawn from the (x1, y1) to the (x2, y2) points. The corners are rounded by an ellipse whose width would be x3 and the ellipse's height would be x3.
//-------------------------------------------------------------------
BOOL Pie(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4);
BOOL Pie(LPCRECT lpRect, POINT ptStart, POINT ptEnd);
The (x1, y1) point determines the upper-left corner of the rectangle in which the ellipse that represents the pie fits. The (x2, y2) point is the bottom-right corner of the rectangle. These two points can also be combined in a RECT or a CRect variable and passed as the lpRect value.
The (x3, y3) point, that can also supplied as a POINT or CPoint for lpStart argument, specifies the starting corner of the pie in a default counterclockwise direction.
The (x4, y4) point, or ptEnd argument, species the end point of the pie.
To complete the pie, a line is drawn from (x3, y3) to the center and from the center to the (x4, y4) points.
//-------------------------------------------------------------------
To draw an arc, you can use the CDC::Arc() method whose syntax is:
BOOL Arc(int x1, int y1, int x2, int y2,
int x3, int y3, int x4, int y4);
Besides the left (x1, y1) and the right (x2, y2) borders of the rectangle in which the arc would fit, an arc must specify where it starts and where it ends. These additional points are set as the (x3, y3) and (x4, y4) points of the figure. Based on this, the above arc can be illustrated as follows:
//-------------------------------------------------------------------
This method uses the same arguments as Arc(). The difference is that while Arc() starts drawing at (x3, y3), ArcTo() does not inherently control the drawing starting point. It refers to the current point, exactly like the LineTo() (and the PolylineTo()) method. Therefore, if you want to specify where the drawing should start, can call CDC::MoveTo() before ArcTo(). Here is an example:
void CExoView::OnDraw(CDC* pDC)
{
CRect Recto(20, 20, 226, 144);
CPoint Pt1(202, 115);
CPoint Pt2(105, 32);
pDC->MoveTo(207, 155);
pDC->ArcTo(Recto, Pt1, Pt2);
}
//------------------------------------------------------------------------
You may wonder why the arc is drawn to the right side of a vertical line that would cross the center of the ellipse instead of the left. This is because the drawing of an arc is performed from right to left or from bottom to up, in the opposite direction of the clock. This is known as the counterclockwise direction. To control this orientation, the CDC class is equipped with the SetArcDirection() method. Its syntax is:
int SetArcDirection(int nArcDirection);
This method specifies the direction the Arc() method should follow from the starting to the end points. The argument passed as nArcDirection controls this orientation. It can have the following values:
Value Orientation
AD_CLOCKWISE The figure is drawn clockwise
AD_COUNTERCLOCKWISE The figure is drawn counterclockwise
The default value of the direction is AD_COUNTERCLOCKWISE. Therefore, this would be used if you do not specify a direction. Here is an example that uses the same values as above with a different orientation:
void CExoView::OnDraw(CDC* pDC)
{
pDC->SetArcDirection(AD_CLOCKWISE);
pDC->Arc(20, 20, 226, 144, 202, 115, 105, 32);
}
//------------------------------------------------------------------------
You can (also) draw an arc using the CDC::AngleArc() method. Its syntax is:
BOOL AngleArc(int x, int y, int nRadius, float fStartAngle, float fSweepAngle);
This member function draws a line and an arc connected. The arc is based on a circle and not an ellipse. This implies that the arc fits inside a square and not a rectangle. The circle that would be the base of the arc is defined by its center located at C(x, y) with a radius of nRadius. The arc starts at an angle of fStartAngle. The angle is based on the x axis and must be positive. That is, it must range from 0° to 360°. If you want to specify an angle that is below the x axis, such as -15°, use 360º-15°=345°. The last argument, fSweepAngle, is the angular area covered by the arc.
The AngleArc() method does not control where it starts drawing. This means that it starts at the origin, unless a previous call to MoveTo() specified the beginning of the drawing.
Here is an example:
void CExoView::OnDraw(CDC* pDC)
{
pDC->MoveTo(52, 28);
pDC->AngleArc(120, 45, 142, 345, -65);
}
//------십자선 그리기------------------------------------------------//
CClientDC pDC(this);
int CenterX=349;int CenterY=298;
int LineSizeX=0; int LineSizeY=0;
LineSizeX=340;
LineSizeY=260;
CPen penRectBlack(PS_SOLID,1,RGB(0,0,255));
CPen *pOldPen;
pDC.SelectObject(&penRectBlack);
pOldPen = pDC.SelectObject(&penRectBlack);
pDC.MoveTo(CenterX,CenterY-LineSizeY);
pDC.LineTo(CenterX,CenterY+LineSizeY);
pDC.MoveTo(CenterX-LineSizeX,CenterY);
pDC.LineTo(CenterX+LineSizeX,CenterY);
pDC.SelectObject(pOldPen);
penRectBlack.DeleteObject();
}
//------------------------------------------------------------------------
//------삼각형 그리기------------------------------------------------//
//CDraw1Doc* pDoc = GetDocument();
//ASSERT_VALID(pDoc);
CBrush NewBrush(RGB(255, 2, 5));
CBrush *pBrush;
CPoint Pt[3];
CDC *pDC = GetDC();
// Top Triangle
Pt[0] = CPoint(125, 10);
Pt[1] = CPoint( 95, 70);
Pt[2] = CPoint(155, 70);
pBrush = pDC->SelectObject(&NewBrush);
pDC->Polygon(Pt, 3);
// Left Triangle
Pt[0] = CPoint( 80, 80);
Pt[1] = CPoint( 20, 110);
Pt[2] = CPoint( 80, 140);
pDC->Polygon(Pt, 3);
// Bottom Triangle
Pt[0] = CPoint( 95, 155);
Pt[1] = CPoint(125, 215);
Pt[2] = CPoint(155, 155);
pDC->Polygon(Pt, 3);
// Right Triangle
Pt[0] = CPoint(170, 80);
Pt[1] = CPoint(170, 140);
Pt[2] = CPoint(230, 110);
pDC->Polygon(Pt, 3);
pDC->SelectObject(pBrush);
//------사각그리기------------------------------------------------//
CPen penRectBlack(PS_SOLID,1,RGB(255,0,0));
pDC->SelectObject(&penRectBlack);
pDC->MoveTo(m_MatchPos.left,m_MatchPos.top);
pDC->LineTo(m_MatchPos.right,m_MatchPos.top);
pDC->LineTo(m_MatchPos.right,m_MatchPos.bottom);
pDC->LineTo(m_MatchPos.left,m_MatchPos.bottom);
pDC->LineTo(m_MatchPos.left,m_MatchPos.top);
//------Text 출력------------------------------------------------//
CFont *Font,*oldFont;
Font=new CFont;
LOGFONT logFont; int nFontHight=25;
logFont.lfStrikeOut=FALSE;//가운데 선긋기
logFont.lfItalic=TRUE;logFont.lfUnderline=FALSE;
logFont.lfEscapement= 0;logFont.lfHeight=nFontHight;
logFont.lfCharSet=HANGEUL_CHARSET;//ANSI_CHARSET;
// Font->CreatePointFont(240,_T("굴림"));
// Font->GetLogFont(&logFont);
Font->CreateFontIndirect(&logFont);
oldFont=dc.SelectObject(Font);
dc.SetBkMode(TRANSPARENT);//dc.SetTextCharacterExtra(2);//행간격
dc.SetTextColor(RGB(255,0,0));//dc.SetBkColor(RGB(255,0,0));
//---------------------------------------------
nTextLine_x=SpotRect.left;//+((SpotRect.right-SpotRect.left)/2);
nTextLine_y=AddBottom+MAINDIS_START_Y-58-8;
dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_x);//x,가로 치수 텍스트
dc.SelectObject(oldFont);delete Font;
Font=new CFont;
logFont.lfEscapement= -900;logFont.lfHeight=nFontHight;
Font->CreateFontIndirect(&logFont);
oldFont=dc.SelectObject(Font);
nTextLine_x=SpotRect.right+16;nTextLine_y=AddBottom+MAINDIS_START_Y-25;
dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_y);//y,세로 치수 텍스트
// CRect rect;
// rect.left=nTextLine_x; rect.right=nTextLine_x+30;
// rect.top=nTextLine_y-15;rect.bottom=nTextLine_y+30;
/// dc.DrawText(csLineSize_y,&rect,DT_SINGLELINE|DT_CENTER|DT_VCENTER);//y,세로 치수 텍스트
//---------------------------------------------
dc.SelectObject(oldFont);delete Font;
//dc.SelectObject(oldFont);Font.DeleteObject();
dc.SelectObject(pOldPen);NewPen.DeleteObject();
/*-------------------------------------------------------------------
CFont Font,*oldFont;
LOGFONT logFont;
int m_nFontSize=14;
CString m_strFont="바탕체";
Font.CreateFont(m_nFontSize,m_nFontSize,-900,0,FW_DONTCARE,FALSE,
FALSE,FALSE,DEFAULT_CHARSET,OUT_DEFAULT_PRECIS,
CLIP_DEFAULT_PRECIS,DEFAULT_QUALITY,DEFAULT_PITCH,
m_strFont);
oldFont=dc.SelectObject(&Font);
dc.SetBkMode(TRANSPARENT);//dc.SetTextCharacterExtra(2);//행간격
dc.SetTextColor(RGB(255,0,0));//dc.SetBkColor(RGB(255,0,0));
//---------------------------------------------
nTextLine_x=SpotRect.left;//+((SpotRect.right-SpotRect.left)/2);
nTextLine_y=AddBottom+MAINDIS_START_Y-60;
dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_x);//x,가로 치수 텍스트
dc.SelectObject(oldFont);Font.DeleteObject();
nTextLine_x=SpotRect.right+6;nTextLine_y=AddBottom+MAINDIS_START_Y-20;
// dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_y);//y,세로 치수 텍스트
CRect rect;
rect.left=nTextLine_x; rect.right=nTextLine_x+30;
rect.top=nTextLine_y-15;rect.bottom=nTextLine_y+30;
dc.DrawText(csLineSize_y,&rect,DT_SINGLELINE|DT_CENTER|DT_VCENTER);//y,세로 치수 텍스트
//---------------------------------------------
dc.SelectObject(oldFont);Font.DeleteObject();
dc.SelectObject(pOldPen);NewPen.DeleteObject();
/*--------------------사인파그래프---------------------------*/
for (f=-500;f<2000;f++) {
y=(int)(sin(f*3.14/180)*100);
SetPixel(hdc, (int)f, y,RGB(0,0,0));
}
/*--------------------그래프--------------------------------*/
void CGrapeDlg::OnPaint()
{
CPaintDC dc(this); // device context for painting
// TODO: Add your message handler code here
for(int i=0; i<3; i++)
{
GrapeDrawEX(i);
}
// Do not call CDialog::OnPaint() for painting messages
}
void CGrapeDlg::GrapeDrawEX(int SetNo)
{
CClientDC dc(this);
int xStartPoint;
int yStartPoint;
COLORREF GrapeLineColor;
if(SetNo==0)
{
xStartPoint=32;
yStartPoint=150;
GrapeLineColor= RGB(0,250,250);
}
else if(SetNo==1)
{
xStartPoint=32;
yStartPoint=350;
GrapeLineColor= RGB(0,250,0);
}
else if(SetNo==2)
{
xStartPoint=32;
yStartPoint=550;
GrapeLineColor= RGB(0,0,250);
}
int xExpand=22;/*x시간확장 11 or 22*/
int yExpand=(40/2)+(40/2);/*y온도 범위확장 20 or 40*/
int xLimit=40;/*y_pixel 나누기 단위 20 or 40*/
int yLimit=40/2; /*x_pixel 나누기 단위* 20 or 40*/
int yTatalNo=200/2; /*100 or 200 select*/
int xwidth=960;/*480 or 960*/
int yhigh=200/2;/*100 or 200*/
int width=xwidth+xStartPoint+xExpand; //width,high
int high=yhigh+yStartPoint+yExpand;
int ThermoBufX[24];
int ThermoBuf[24];
ThermoBuf[0]=20;
ThermoBuf[1]=30;
ThermoBuf[2]=40;
ThermoBuf[3]=45;
ThermoBuf[4]=50;
ThermoBuf[5]=40;
ThermoBuf[6]=40;
ThermoBuf[7]=50;
ThermoBuf[8]=50;
ThermoBuf[9]=55;
ThermoBuf[10]=60;
ThermoBuf[11]=70;
ThermoBuf[12]=80;
ThermoBuf[13]=90;
ThermoBuf[14]=100;
ThermoBuf[15]=105;
ThermoBuf[16]=104;
ThermoBuf[17]=100;
ThermoBuf[18]=97;
ThermoBuf[19]=98;
ThermoBuf[20]=100;
ThermoBuf[21]=101;
ThermoBuf[22]=100;
ThermoBuf[23]=100;
/*---------------Backgndbrush---------*/
COLORREF m_BackgndBrush= RGB(0,0,0);
CBrush brush(m_BackgndBrush),*pOldBrush;
pOldBrush = (CBrush *)dc.SelectObject(&brush);
dc.Rectangle(xStartPoint,yStartPoint,width,high);
/*---------------BaseTime/Thermo_brush---------*/
COLORREF m_BaseTimebrush= RGB(250,250,250);
CBrush brush2(m_BaseTimebrush);
dc.SelectObject(&brush2);
dc.Rectangle(xStartPoint-27,high,width+2,high+20);/*time*/
dc.Rectangle(xStartPoint-27,yStartPoint,xStartPoint,high+20);/*thermo*/
/*---------------단위pixel-------------*/
for(int i=xStartPoint; i<width; i+=xLimit)
{
for(int n=yStartPoint; n<high; n+=yLimit)
{
dc.SetPixel(i,n,RGB(0,250,250));
}
}
/*----------------전체 테두리-중간 Rect1-----------------*/
CPen penRectBlue1(PS_SOLID,2,RGB(50,0,250)),*pOldPen;
pOldPen = dc.SelectObject(&penRectBlue1);
dc.MoveTo(xStartPoint-27,yStartPoint);
dc.LineTo(width,yStartPoint);
dc.LineTo(width,high+20);
dc.LineTo(xStartPoint-27,high+20);
dc.LineTo(xStartPoint-27,yStartPoint);
/*---------------전체 테두리-안쪽-------------------*/
CPen penRectYello2(PS_SOLID,2,RGB(250,250,0));
dc.SelectObject(&penRectYello2);
dc.MoveTo(xStartPoint+4,yStartPoint+4);
dc.LineTo(width-4,yStartPoint+4);
dc.LineTo(width-4,high-4);
dc.LineTo(xStartPoint+4,high-4);
dc.LineTo(xStartPoint+4,yStartPoint+4);
/*---------------전체 테두리-바깥 Rect3-------------------*/
CPen penRectBlack(PS_SOLID,4,RGB(0,250,250));
dc.SelectObject(&penRectBlack);
dc.MoveTo(xStartPoint-3-27,yStartPoint-3);
dc.LineTo(width+3,yStartPoint-3);
dc.LineTo(width+3,high+20+3);
dc.LineTo(xStartPoint-3-27,high+20+3);
dc.LineTo(xStartPoint-3-27,yStartPoint-3);
/*---------------온도 기준 line-------------------*/
CPen penRectBlack2(PS_SOLID,2,RGB(0,0,0));
dc.SelectObject(&penRectBlack2);
dc.MoveTo(xStartPoint-26,high);
dc.LineTo(xStartPoint,high);
/*---------------각시간 지시선 ----------------------*/
CPen penWhite(PS_SOLID,2,RGB(250,250,250));
dc.SelectObject(&penWhite);
for(int n2=xStartPoint+xLimit; n2<width; n2+=xLimit)
{
dc.MoveTo(n2,high-6);
dc.LineTo(n2,high-16);
}
/*---------------각온도 지시선-----------------------*/
for(int n3=yStartPoint+yLimit; n3<high; n3+=yLimit)
{
dc.MoveTo(xStartPoint+6,n3);
dc.LineTo(xStartPoint+16,n3);
}
/*--------------x_BaseTime출력Text---------------*/
CString TimeText;
int time=0;
// ModifyStyleEx(0,WS_BORDER,SWP_DRAWFRAME);
dc.SetBkMode(TRANSPARENT);
dc.SetTextColor(RGB(50,0,0));
for(int a2=xStartPoint+xLimit; a2<width; a2+=xLimit)
{
time++;
TimeText.Format("%d",time);
dc.TextOut(a2-6,high+3,TimeText);
}
dc.SetTextColor(RGB(250,0,0));
dc.TextOut(xStartPoint-25,yStartPoint-24,"( 'C )");
dc.SetTextColor(RGB(0,0,250));
dc.TextOut(xStartPoint+36,high+26,"TIME- - -");
/*----------------y_Base온도Text--------------------*/
CString ThermoText;
for(int a3=yStartPoint+yLimit; a3<high; a3+=yLimit)
{
if(yhigh==100)
{
ThermoText.Format("%d",yTatalNo-((a3-yLimit)-yStartPoint)+yLimit);
dc.TextOut(xStartPoint-24,a3-8,ThermoText);
}
else if(yhigh==200)
{
ThermoText.Format("%d",(yTatalNo-((a3-yLimit)-yStartPoint)+yLimit)/2);
dc.TextOut(xStartPoint-24,a3-8,ThermoText);
}
}
/*------------온도 point 꼭지점 ----------*/
int count1=0;
int xMove=3;
int point_x=6;
int point_y=6;
CPen penWhite2(PS_SOLID,4,RGB(250,0,50));
dc.SelectObject(&penWhite2);
for(int c=xStartPoint+xLimit; c<width; c+=xLimit)
{
ThermoBufX[count1]=c;
count1++;
}
for(int c2=0; c2<24; c2++)
{
if(yTatalNo==100)
{
dc.Ellipse(ThermoBufX[c2]-xMove,(yTatalNo-ThermoBuf[c2])+yStartPoint+yExpand,ThermoBufX[c2]+point_x-xMove,(yTatalNo-ThermoBuf[c2])+yStartPoint+yExpand+point_y);
}
else if(yTatalNo==200)
{
dc.Ellipse(ThermoBufX[c2]-xMove,((yTatalNo/2)-ThermoBuf[c2])*2+yStartPoint+yExpand,ThermoBufX[c2]+point_x-xMove,((yTatalNo/2)-ThermoBuf[c2])*2+yStartPoint+yExpand+point_y);
}
}
/*-------------온도 그래프 실선--------*/
int count2=0;
int GrapeStartPoint=yhigh+yStartPoint+yExpand-4;
CPen penGrapeRed(PS_SOLID,1,GrapeLineColor);
dc.SelectObject(&penGrapeRed);
dc.MoveTo(xStartPoint+4,GrapeStartPoint);
for(int d=xStartPoint+xLimit; d<width; d+=xLimit)
{
ThermoBufX[count2]=d;
count2++;
}
for(int d2=0; d2<24; d2++)
{
if(yTatalNo==100)
{
dc.LineTo(ThermoBufX[d2],(yTatalNo-ThermoBuf[d2])+yStartPoint+yExpand+3);
}
else if(yTatalNo==200)
{
dc.LineTo(ThermoBufX[d2],((yTatalNo/2)-ThermoBuf[d2])*2+yStartPoint+yExpand+3);
}
}
/*--------------온도출력 Text---------------*/
// ModifyStyleEx(WS_BORDER,0,SWP_DRAWFRAME);
CString TextData;
dc.SetBkMode(TRANSPARENT);
dc.SetTextColor(RGB(250,250,250));
for(int a=0; a<24; a++)
{
TextData.Format("%d",ThermoBuf[a]);
if(yTatalNo==100)
{
dc.TextOut(ThermoBufX[a]-6,(yTatalNo-ThermoBuf[a])+yStartPoint+yExpand-20,TextData);
}
else if(yTatalNo==200)
{
dc.TextOut(ThermoBufX[a]-6,((yTatalNo/2)-ThermoBuf[a])*2+yStartPoint+yExpand-20,TextData);
}
}
/*-----------------------------------------------*/
dc.SelectObject(pOldBrush);
dc.SelectObject(pOldPen);
/*------------------------------------------------*
'1.소프트웨어 이야기 > 01.MFC(Visual Studio)' 카테고리의 다른 글
| 참고용 소스 모음 (0) | 2012.07.16 |
|---|---|
| SQL2008 - 설치중 "performance counter registry hive consistency" 오류 발생시 처리 방법 (0) | 2012.06.14 |
| MFC/MDI 시작 시 새 MDI 자식 창 만들기 중지 (0) | 2012.04.11 |
| 응용 프로그램 구성이 올바르지 않기 때문에 이 응용 프로그램을 시작하지 못했습니다.. 에러.. (3) | 2011.02.11 |
참고