이번 미케익을 리뷰하는 날이 본인 생일 전날이었네요.. 

리뷰어가 되자 마자 방문해 본 것은 이번이 처음이었네요..

예약은 필수라고 해서 전일 저녁 늦게 미리 예약하고 다음날 저녁에 방문하였습니다.

아이들과 함께 아빠 생일 케익 만들기로 하고 아이들에고 추억도 남겨주고 싶었기에 아이들이 만들기로 하고 전 옆에서 도와주기만을 하기로 했습니다.


그런데 가는 날이 장날이라고 비가 주루룩 내리더군요.


들어가서 마음씨 좋아보이는 주인 아저씨가 저희를 반갑게 맞아주셨네요.  위드블로그에서 리뷰 나왔다고 하니 잘 협조 해 주셨고요..(감사합니다.)


아이들이 원하는 초코케익으로 진행을 요청했네요.. 

전 다른 케익을 하고 싶었지만 아이들이 오늘은 주인이니까 아이들의 의견을 따르기로 했습니다.


NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/400sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire


우선 자리에 앉게 되면 위와 같은 돌림판이 저희를 반갑게 맞아 줍니다. 이 돌림판에 주문한 케익이 올라가겠죠..


NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/320sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire



케익이 오기 전 시간이 남아 입구를 찍어 보았네요. 미처 못 봤는데 케익 사진들이 보이네요. 저걸 참고했어야 했는데, 애들이 하기에는 너무 어려울 듯 해서 아이들이 하고 싶은데로 하게 했네요.

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/100sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire

마음 좋아 보이는 주인 아저씨가 저희 큰딸에게 장식하는 방법을 가르쳐 줍니다. 아이는 열심히 따라 하네요.. 

배우는게 금방이네요.  처음에는 큰아이가 우선 한 줄을 다 장식하고 다음 줄은 작은 아이에게 넘겨 줄 모양이네요.

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/125sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/125sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire

간만에 큰 아이가 집중하는 모습을 보이네요. 책볼때 말고 이렇게 집중할 줄은 몰랐네요.

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/200sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/160sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire

 큰아이가 하는 동안 작은 아이는 다른 분들이 하는 것들을 지며보고 있네요. 언니가 아직 넘겨주지 않아서 장식을 못하고 있지만 곧 할 것이라고 믿고 있죠. 큰아이가 양보를 해 주어야만 할텐데요. 과연 양보를 해 줄까요?

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/400sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire


큰아이가 만든 1차 장식입니다. 아직 초등학교 2학년인 아이 치고는 잘 한 것이겠죠? 뭐 제가 했어도 비슷했을 듯 싶네요.

제가 방문했을때는 이상하게도 여자분들만 계시더군요. 만남 백일 케익 만드는 청소년들.. 부모님 생신 케익 만드는 직장 여성분...

남자는 커플로 온 남자밖에 없었네요.. 그렇다고 남자분들이 못 갈 곳은 아니랍니다. 혼자 만들수 있는 공간도 있거든요.

그리고 남자분들도 케익하나 만들어서 여자분에게 주는 로맨스도 필요할 듯 하고요.(뭐 명품백을 좋아하는 분들에게는 효과 없겠지만요..)


NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/200sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/200sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire

작은 아이는 장식을 하고 큰 아이는 과일과 초콜릿과 사탕으로 장식을 하고 있네요. 많은 장식품들이 있는데 그릇에 담아서 계산대에 가면 주인아저씨가 계산 해 주신답니다.(저희는 애 때문인지 나중에 끝나고 계산 해 주신다고 하셔서 바로 장식을 했네요.. 이런 작은 부분까지 신경 써 주신부분 감사합니다.)


NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/160sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire


장식을 올리고 추가로 모양을 내고 있네요. 전 글자를 세기거나 가루를 뿌려 장식을 하고 싶었지만 아이들은 직접 꾸미는 재미로 인해 그것은 못하게 하네요. 그래도 아이들이 좋아하니까. 뭐.. 괜찮습니다.

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/200sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire

아이들이 좋아할 만한 장식들이 참 많아요. 그리고 더 좋은건 그런 장식들이 생각보다 비싸지는 않더라구요.(학생들 입장에서는 비쌀수도 있겠네요.)

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire


간단한 도마와 칼도 준비되어 있어서 과일 장식이나 다른 장식을 자신만의 방식으로 만들수 있는 점도 하나의 매력이네요.


NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire

NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/400sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire


주인 아저씨의 자젹증이네요. 설탕공예사 자격증인 듯 하네요. 

그럼 혹시 여기 설탕 장식을 주인 아저씨가 직접 만드시는건가? 에고 물어볼 걸 그랬네요...ㅠㅠ


NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/200sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fireNIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire


가게는 아담하지만 케익 만드는데는 아무런 문제가 없습니다. 아까 앞에서 얘기한것과 같이 혼자와서 만들 수 있는 공간도 충분하고요.

연인에게나 가족에게 특별한 날에 케익 만들어 주고 싶을때 미케익을 찾아서 만들면 참 좋을 듯 하네요..


마지막으로 저희 두 딸이 만든 작품을 보여 드리면서 리뷰를 마치고자 합니다.




NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/250sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire





NIKON CORPORATION | NIKON D80 | Aperture priority | Center-weighted average | 1/200sec | F/1.8 | 0.00 EV | 50.0mm | ISO-400 | Flash did not fire




아참. 젤로 중요한거 하나 빼 먹었네요. 케익은 제가 좋아하는 맛이네요. 달지도 않고 부드러운 케익이네요.

유통기한도 잘 지켜지고 있어서인지 신선한 느낌이 강하고요.


맛도 보여주고 자신만의 케익을 만들고 싶으신 분들은 꼭 미케익에 들르셔서 케익 만들어 보세요.


P.S 가격이 2만원 넘었는데 그냥 쿨하게 깎아주신 주인아저씨 멋있었어요. 그리고, 썰렁한 농담도 괜찮았구요.

지금까지 받아본 생일 케익 중 최고의 케익이었던것 같습니다.


다음 11월 안사람 생일에는 저 혼자나 아니면 아이들과 다시 한번 찾아뵙고 만들고 싶습니다.

그때도 반갑게 맞아주세요..


위드블로그

위치는 충남 천안시 동남구 신부동 462-14 세세빌 3층이예요.
전화번호는 041-552-7749 입니다.




이 장소를 Daum지도에서 확인해보세요.
충청남도 천안시 동남구 신안동 | 내가만든미케익 천안점
도움말 Daum 지도

요즘 참 정신없는 듯 지낸다..

 

휴일이 언제였는지..

제대로 쉬어본게 언제였는지..

애들과 놀러가본게 언제였는지..

 

좀 더 가족과 많은 시간을 보내기 위해 회사를 옮겼는데..

 

오히려 더 바빠졌으니..

 

내가 원했던건 이게 아닌데..

 

좀 덜 벌어도 가족들과 더 많은 시간을 보낼려고 했던 것인데..

 

진짜로 업종 변경을 해야 하나..

고민이 심각하다..

 

내가 과연 무엇이 잘못된 것일까..

 

아주 많은 고민이 되는 하루다..

일이 힘든 것도 싫지만, 그만큼의 휴식을 갖지 못하는게 더 싫다..

 

나도 친구처럼 잠수를 타야 하나..

 

나에게 프로그래머는 어울리지 않는 직업인 것일까..

 

프로그래머는 맞지만.. 지금 하는 장비쪽 프로그래머는 그만 두는 것이 나은 것일까..

 

이런저런 생각이 많이 든다..

 

오늘은 와이프와 진지하게 얘기를 해 봐야겠다..

이제는 개발자이기도 하면서 사람도 뽑고 있는 자리에 있게 되었다.

그런데, 지금 다니는 회사가 작은 회사이긴 하지만 너무 얼토당토 않는 이력서들을 보면 괜히 화가 난다.

 

사진 없는 이력서..

경력이 10년이 넘어간다고 하면서 이력서에는 그냥 프로젝트 이름만 달랑 있고..

혹시나 해서 불러서 면접 보면 거기서 한 것은 옆에서 시다(도움)만 주었을 뿐이고 그 프로젝트에 대해서 제대로 아는 것도 없다.

이런 사람은 경력이 10년이라고 하나 우리쪽에서는 1년짜리랑 마찬가지로 밖에 볼 수 없다.

 

무조건 경력이 많다고 임금을 세게 부르거나..(이건 뭐 뽑든지 말든지라는 식인듯..) 대기업 같이 요구하려면 그냥 대기업에 가든지..

 

대기업에서 안 되니까 중소기업에 오는 사람들은 중소기업에 오면 그만큼 힘들 다는 사실을 알아야만 한다.

대기업에서는 중소기업이 뭐가 될 것 같다 그러면 바로 아이템을 뺏어가는 식이 많으니까..

허탈함도 느끼고...

 

하지만, 중소기업도 중소기업만의 장점이 있다..

대기업에서는 다양한 경험이 어렵지만, 중소기업에서는 그 다양한 경험을 할 수 가 있다는 것이다.

대기업 다니시다가 중소기업으로 오시는 분들 중 대부분이 한가지 분야만 잘 하신다.

그러다 보니 다른 분야의 것을 개발하려고 하면 대부분 퇴사 해 버리신다.

뭐, 어찌보면 단점일 수도 있겠지만, 자신의 기술을 늘리는데는 대기업보다는 중소기업이 오히려 나을 수 있다는 것이다.

 

중소기업도 돈을 많이 주고 싶다. 하지만, 중소기업 대부분이 대기업에 의존해 일을 하다보니 대기업에서 NEGO가 들어오다보니

대기업만큼 돈을 주기 어려운 것이다. 대기업이 조금만 중소기업을 생각한다면 자신들의 NEGO폭을 조금만 줄였으면 좋겠다.

 

그럼 꼭 대기업에 가지 않고도 중소기업으로 오는 사람들도 많을 것이다.

 

대기업의 완장을 차고 싶어서 가시는 분들은 대기업으로 가시라.. 대신 20~30년 까지도 버틸 자신이 있으셔야만 한다.

돈을 많이 주는 만큼 그만큼 일을 시키니까..

 

말이 삼천포로 빠져서 그런데..

 

결론은 이거다..

 

중소기업에 지원하는 지원자 여러분들..

대기업에 이력서나 경력서를 쓰시는 것 같이 중소기업에도 작성해 달라는 것이다..

그리고, 자신의 실력을 객관적으로 보고 희망 연봉을 적으시라는 것이다..

 

내가 보기엔 이정도 받기에 뭐한데 내가 생각한 것 보다 1~2천 넘게 부르시니 면접을 보고 싶어도 면접을 볼 수가 없으니까 말이다..

조금만 객관적으로 자신을 돌아보시고 이력서를 내고 기다려보시라..

 

아마 많은 곳에서 연락이 올 것이다..

 

어차피 1%의 대기업보다는 99%의 중소기업이 훨씬 많으니까..

 

'일상다반사 > 내 생각..' 카테고리의 다른 글

역지사지.  (0) 2013.10.24
중소기업 지원자들을 보면서..  (1) 2013.07.04
대선을 바라보면서(박근혜 vs 문재인)  (1) 2012.11.28
교육중..  (0) 2012.07.04
  1. Favicon of http://projob.tistory.com BlogIcon 정도영 2013.07.25 08:52 신고

    확실히 대기업과 중소기업의 차이는 극명합니다. 그런데 이 차이를 지원하는 분들은 '알고만' 있지 실제로 '느끼지'는 못하시는 경우가 많은 것 같아요. 지나가다 보고 한자 적습니다. 아이들과의 프로필 사진이 정말 멋있네요^^

어제인가.. 그제인가..

 

우연히 보게 되었는데.. 재밌네...

 

뻔한 이야기일수도 있는데.. 1화 마지막에 나온 "바람이 분다"는 참 괜찮았다..

옆의 안사람은 눈가가 촉촉해 지기도 하고...

 

다음회가 기다려지는군...

 

5월 8일 어버이날.. 


목천초에서 효도잔치를 했다..(사실 이 행사는 매년 진행된다..)

올해는 목천초 100주년 기념이기도 하고.. 


이날 우리 애들은 유치원과 2학년에서 활약함...


그날 행사에 참석한 우리 애들 활약 모습을 담아보았다..


아이뻐5로 촬영후 다음팟으로 인코딩해서 올림..


가희 활약..우측 두번째줄에 있음...



둘째 나희 활약.. 따로 놀지만.. 열심히 하는 모습이 귀여움...


자동차 오너라면 한번쯤은 무인 단속 카메라에 걸려 보신적이 있을 것이다.


나도 몇번 걸렸으니.. 뭐...


그런데, 이럴때 에매하게 찍혔나 싶을때 알아보는 사이트가 있다..


경찰청에서 운영하는 교통법칙금.과태료 조회 및 납부 시스템....


여기서 먼저 조회해보면 나올 것이다.. 


https://www.efine.go.kr/


보통 찍히고 나면 빠르면 3~4일 걸리지만, 일주일 이상 걸릴수도 있다고 하니 참고 하는것도 괜찮을 듯 싶다..


참고로 5년동안 자료가 보관이라고 한다. ㅠㅠ.. (내 아는 사람은 3~6개월 뒤에 나온 사람도 있다고 한다..)


그 다음으로 단속 결과 확인 사이트도 있다..


이곳은 공인인증없이 차번호와 주민번호 뒷자리만으로도 조회가 된다..


http://vimshome.ts2020.kr/jsp/hpg/pubservice.jsp



마지막으로 도로교통동단 운전면허 시험장 사이트에서도 가능하니 참고하는 것도 괜찮을 듯 하다.


http://dls.koroad.or.kr/main.jsp



그래도 젤로 좋은건 신호 잘 지키고 안전 운전 하는 것일것이다..




이번 대선을 바라보면서 참.. 여러가지 생각을 하게된다.


지난 노무현 대통령때와 비슷하면서도 다르고..

현 가카 뽑을때랑 비슷한면도 있고..


독재자였으면서 자신의 정적을 없앴던 자의 딸은 과거는 과거일뿐이라고 말하면서, 자신은 아버지에 대한 것은 지우려고 하고..

그런거 보면 드라마 "내딸 서영이"가 오히려 나아 보일 정도다.. 이건 뭐.. 아버지일은 자신과 아예 무관하다고 하는 것은 아닌듯한데..

그러면서 아버지와 어머니의 향수를 자극해 대통령이 되려고 하니..


또 다른 후보는 야권 단일화를 단일화가 같기도 하고 단순화 같기도 하고.. 

좀 에매모호한 단일화가 되어 버렸고.. (이건 언론의 플레이이기도 하다.. 안철수는 분명 문재인을 지지 한다고 했는데, 뉴스에서는 그걸 빼버리지 않나..)


난 이번 대선에서 정권 교체가 이뤄지길 바라는 사람이다..(어떤 의미에서의 정권 교체는 박근혜가 되더라도 지금 같지 않게 한다면 박근혜도 인정해 줄 것이다.)


대선 후에 상대방의 좋은 공약은 가져와서 써도 되었으면 하는 소시민의 한사람이기도 하다..


공식 선거 운동이 가능한 동안은 난 그날그날의 상황을 보면서 나의 생각을 적어볼 생각이다.


현재까지는 문재인에게 조금 더 마음이 기울어져 있지만, 선거 운동을 지켜보면서 바뀔수도 있다.(뭐. 그렇다고 박근혜를 찍을려면 나를 설득해주는 사람이 있다면 모르겠지만..)


참.. 어제 TV 광고는 감성이 아닌 이성에 호소한 문재인의 승으로 보고 싶다.

칼 맞은 것을 광고로 쓰는 것은 이해하지만, 난 그 당시 상황을 오히려 정치적으로 이용해 박근혜의 위치가 더 올라섰다는 것은 부정하지 못할 것이다.


1.기회는 평등할 것입니다. 

2.과정은 공정할 것입니다. 

3.결과는 정의로울 것입니다.


어제 이 광고 카피가 맘에 든다.



  1. 2013.01.29 10:19 신고

    기회는 더 평등하지 못하고..
    과정은 더 공정하지 못하다(비밀, 밀실....)
    결과는 더 정의롭지 못하다..

    이게 현 정부이며 차기 정부라고 생각이 든다..
    참.. 나라 꼴 잘 돌아가는구나..

1학년 1반이 지난 9월 15일에 갯벌 체험에 다녀 왔습니다.

거기서 찍은 사진들 일부를 올려 봅니다.


재밌게 보셨으면 좋겠습니다.






-------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 콘트롤 -  ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

//---List Box / file Dir Dlg--------------------------------------------------------

 //----------------------------------------------------------------------------
         // 폴더 얻기
   char szTemp[255];
     memset(szTemp, 0, 255);
     lstrcat(szTemp, "c:\\Data");
     CDialog::DlgDirList(szTemp, IDC_LISTBOX, NULL, DDL_EXCLUSIVE | DDL_DIRECTORY); 
  //----------------------------------------------------------------------------

  //----------------------------------------------------------------------------
         //화일명 얻기
  CString Path_Log="C:\\WaterSensor성능검사기\\Data\\";
  CString ss=""; CString tt="";
   
      tt="*.mdb";
  ss =Path_Log+"*.mdb";
  
  char szTemp[255];
  memset(szTemp, 0, 255);
  lstrcat(szTemp, ss);
  CDialog::DlgDirList(szTemp, IDC_SLOG_LIST, NULL, NULL);// DDL_EXCLUSIVE | DDL_DIRECTORY);

  int nList=0; CString csTmp="";
  sLog.SetCurSel(nList);
/*
  if(sLog.GetTextLen(nList)>0)
  {
   sLog.GetText(nList ,csTmp);
   if( FileExists(Path_Log+csTmp))
   {
       ss=LoadReadFile(Path_Log+csTmp);
       LogDisplay(ss);
   }
  }
*/

//==============================================================================
//---다른 Label 콘트롤(Threed32 Panel) Control 상속 얻기 -----------------------

 #include "sspnctrl.h"

 CSSPNCtrl *Static;
 Static = (CSSPNCtrl *)GetDlgItem(IDC_IO_0); 
 Static->SetBackColor(0x0000ff); //BGR

void CAttachMachineView::Sub_SetDlgItemColor(int nID, COLORREF CColor)
{
 CSSPNCtrl *Static;
 Static = (CSSPNCtrl *)GetDlgItem(IDC_IO_0); 
 Static->SetBackColor(CColor);
}

 CSSPNCtrl *Static;
 Static = (CSSPNCtrl *)GetDlgItem(IDC_EXIT_WAITE_MESSAGE); 
 Static->ShowWindow(true);

 #include "LabelControl.h"
 ((CLabelControl*)GetDlgItem(nID))->SetBackColor(OK_COLOR);


//---Control 상속 보이기--------------------------------------------------------

 CButton *pBtn;
 pBtn = (CButton *)GetDlgItem(IDC_CLOSE_BTN);
 pBtn->ShowWindow(true);

 Static = (CStatic *)GetDlgItem(IDC_CAM_NAME); 
 Static->ShowWindow(true);


//---Control 이벤트--------------------------------------------------------
 .h
 //{{AFX_MSG(CImageViewView)
 afx_msg bool OnClickImageView(UINT nID);
 //}}AFX_MSG
 DECLARE_MESSAGE_MAP()
 .cpp
 BEGIN_MESSAGE_MAP(CImageViewView, CFormView)
 //{{AFX_MSG_MAP(CImageViewView)
 ON_COMMAND_RANGE(IDC_IMG_VIEW1, IDC_IMG_VIEW4, OnClickImageView)
   END_MESSAGE_MAP()
 
 bool CImageViewView::OnClickImageView(UINT nID) 
 {
 CString csTmp;
 csTmp.Format("%d",nID);
 AfxMessageBox(csTmp);
 return true;
 }


 #define OK_COLOR  RGB(100,150,255)
 #define NG_COLOR  RGB(235,60,60)
 COLORREF clLime;


 //--Inage List
 BOOL bRetValue = FALSE;
 HICON hIcon = NULL;
// m_CurLibType = m_SelLibrary = m_SleLibType = LINE2RECT;


 SetIcon(m_hIcon, TRUE);
 SetIcon(m_hIcon, FALSE);

 // Create image list
 bRetValue = m_ImageList.Create(80, 80, ILC_COLOR32 | ILC_MASK, 5, 1);
 ASSERT(bRetValue == TRUE);

 // Add some icons
 hIcon = AfxGetApp()->LoadIcon(IDI_ICON_MARK);
 m_ImageList.Add(hIcon);

 m_lbxListBox.SetImageList(&m_ImageList);

//--CShadeButton------------------------------------------------------
 #include "ShadeButtonST.h"
 
 .h --
 CShadeButtonST m_btnXYOrg;
 
 ..cpp
 DDX_Control(pDX,IDC_BTN_XYORG,m_btnXYOrg);  //IDC_BTN_XYORG 푸시 버튼
 
 ..OnInitDialog() 
 //COLORREF crBtnColor;
 //crBtnColor = ::GetSysColor(COLOR_ACTIVEBORDER) + RGB(100, 50, 50);
 m_btnXYOrg.SetShade(CShadeButtonST::SHS_HBUMP);
 
 //-------
 m_btnXYOrg.SetShade(CShadeButtonST::SHS_HSHADE);
 m_btnXYOrg.Invalidate(); 
 m_btnXYOrg.SetShade(CShadeButtonST::SHS_HSHADE,8,10,30,RGB(100,55,0));
 
 
 
 //--CLabelControl--------------------------------------------------

 CLabelControl *pLabel;
 for(int i=0; i<MAX_ONE_BD-2; i++)//0-5 Label1 - Label6
 {
  pLabel = (CLabelControl *)GetDlgItem(IDC_LABEL1+i);
  pLabel->SetEnabled(FALSE);
 }
 //Label7 ID가 순서대로가 아님 
 pLabel = (CLabelControl *)GetDlgItem(IDC_LABEL7);
 pLabel->SetEnabled(FALSE);

 CComboBox *pcbo;
 pcbo = (CComboBox *)GetDlgItem(IDC_COMBO_SELECT_AXIS);
 m_SelectAxisNo = pcbo->SetCurSel(0);

 pcbo = (CComboBox *)GetDlgItem(IDC_COMBO_SELECT_MODE);
 m_SelectAxisMode= pcbo->SetCurSel(0);
 pcbo->EnableWindow(false);

 CStatic *Static;
 Static = (CStatic *)GetDlgItem(IDC_STATIC_AXIS_MODE); 
 Static->EnableWindow(false);//Static->ShowWindow(false);

 CButton *pchk;
 pchk = (CButton *)GetDlgItem(IDC_RADIO_MMCBOARD1);
 pchk->SetCheck(TRUE);

 // Axis One Select LED Status
 m_ledOpSelect1.SetValue(false); m_ledOpSelect2.SetValue(false);m_ledOpSelect3.SetValue(true);

/*------Combo Box---------------------------------------------------*/

 CComboBox *pcbo2;
 pcbo2 = (CComboBox *)GetDlgItem(IDC_COMBO_SELECT_MODE);
 m_SelectAxisMode = pcbo2->SetCurSel(0);

/*------이벤트 얻기---------------------------------------------------*/

BOOL CManualMotorPage::PreTranslateMessage(MSG* pMsg) 
{
 // TODO: Add your specialized code here and/or call the base class
 int ret;
 CLabelControl *plbl;
 if(pMsg->message == WM_LBUTTONDOWN){
  for(int i=0;i<MAX_AXIS;i++){
  
   plbl = (CLabelControl *)GetDlgItem(IDC_LBL_AXIS_X+i);
   if(pMsg->hwnd == plbl->m_hWnd){
    
     return TRUE;
    }
   }
  }
 } 
 return CPropertyPage::PreTranslateMessage(pMsg);
}

/*------Icon---------------------------------------------------*/

 HICON m_hIconOnOff[2];

 m_hIconOnOff[0] = AfxGetApp()->LoadIcon(IDI_OFF);
 m_hIconOnOff[1] = AfxGetApp()->LoadIcon(IDI_ON);


 CStatic *icon;

 icon = (CStatic *)GetDlgItem(IDC_PIC_LED1);
 icon->SetIcon(m_hIconOnOff[0]);


/*------Button Enable-----------------------------------------------------*/

 CButton *opBtn;
 opBtn=(CButton *)GetDlgItem(IDC_BTN_START);
 opBtn->EnableWindow(FALSE);
 CCommandButton *origBtn; 
 origBtn=(CCommandButton *)GetDlgItem(IDC_CMD_ORIG_START);
 origBtn->SetEnabled(FALSE);

/*------Microsoft Form2.0 Check Box Set------------------------------------*/

// void SetValue(VARIANT* newValue);
 void SetValue( BOOL newValue);
// VARIANT GetValue();
 BOOL GetValue();
void CMdcCheckBox::SetValue(BOOL newValue)
{
 static BYTE parms[] =
  VTS_BOOL;
 InvokeHelper(0x0, DISPATCH_PROPERTYPUT, VT_EMPTY, NULL, parms,
   newValue);
}
BOOL CMdcCheckBox::GetValue()
{
 BOOL result;
 InvokeHelper(0x0, DISPATCH_PROPERTYGET, VT_BOOL, (void*)&result, NULL);
 return result;
}

 CMdcCheckBox *pchk;
 pchk = (CMdcCheckBox *)GetDlgItem(IDC_CHECKBOX1);
 pchk->SetValue(true);

 CMdcCheckBox *pchk;
 pchk = (CMdcCheckBox *)GetDlgItem(IDC_CHECKBOX1);
 if(pchk->GetValue())AfxMessageBox("on");
 else AfxMessageBox("off");

/*------Radio Button Set---------------------------------------------------*/

 CButton *pchk;
 pchk = (CButton *)GetDlgItem(IDC_RADIO_NONE);
 pchk->SetCheck(FALSE);
 pchk = (CButton *)GetDlgItem(IDC_RADIO_SPLIT);
 pchk->SetCheck(TRUE);
/*------------------------------------------------------------------------*/

/*------어레이 이벤트 발생 설정 ------------------------------------------*/
   ..h
 protected:
 //}}AFX_MSG
 afx_msg void OnChangeTray(UINT nID);
 DECLARE_MESSAGE_MAP()

   ..cpp
 BEGIN_MESSAGE_MAP(CPreMountDataPage, CPropertyPage)
 //}}AFX_MSG_MAP
 ON_COMMAND_RANGE(IDC_RADIO_TRAY1, IDC_RADIO_TRAY4, OnChangeTray)
 END_MESSAGE_MAP()

void CPreMountDataPage::OnChangeTray( UINT nID )
{
 CLabelControl *label;
 UpdateData(TRUE);
 m_nTrayNo = nID - IDC_RADIO_TRAY1;
}


/*------Gride Scroll-----------------------------------------------------*/
 m_MSFlexGrid.SetScrollTrack(true);


/*------Icon 불러오기-----------------------------------------------------*/

  IDC_PIC_LED1 : Picture Properties, Type -Icon

 HICON m_hIconOnOff[2];

 m_hIconOnOff[0] = AfxGetApp()->LoadIcon(IDI_OFF);
 m_hIconOnOff[1] = AfxGetApp()->LoadIcon(IDI_ON);

 CStatic *icon;
 for(int i=0; i<9; i++) {
  icon = (CStatic *)GetDlgItem(IDC_PIC_LED1 + i);
  icon->SetIcon(m_hIconOnOff[0]);
 }

/*------다중 콘트롤 ID 지정 및 얻기----------------------------------------*/

DeviceCheckView.h 화일

//}}AFX_MSG
DECLARE_MESSAGE_MAP()
afx_msg void OnChangeIoNo( UINT nID );
//-----

DeviceCheckView.cpp 화일

void CDeviceCheckView::DoDataExchange(CDataExchange* pDX)
{
 CFormView::DoDataExchange(pDX);
 //{{AFX_DATA_MAP(CDeviceCheckView)
 DDX_Radio(pDX, IDC_IONO1, m_nioNo);
 //}}AFX_DATA_MAP
}

BEGIN_MESSAGE_MAP(CDeviceCheckView, CFormView)
 //{{AFX_MSG_MAP(CDeviceCheckView)
 ON_WM_TIMER()
 //}}AFX_MSG_MAP
 ON_COMMAND_RANGE(IDC_IONO1, IDC_IONO6, OnChangeIoNo)
END_MESSAGE_MAP()

void CDeviceCheckView::OnChangeIoNo( UINT nID )
{
 m_nioNo = nID - IDC_IONO1;
}


/*------콘트롤 ID 지정 및 얻기---------------------------------------------*/ 
//--------------------------------------------------------------------------
 ON_EVENT(CIODisplay, IDC_OUT_T0, -600 /* Click */, OnClickOutBtn, VTS_NONE)
 ON_EVENT(CIODisplay, IDC_OUT_T1, -600 /* Click */, OnClickOutBtn, VTS_NONE)
 ON_EVENT(CIODisplay, IDC_OUT_T2, -600 /* Click */, OnClickOutBtn, VTS_NONE)

void CIODisplay::OnClickOutBtn() 
{
 int id = GetFocus()->GetDlgCtrlID() - IDC_OUT_T0; 
}
//--------------------------------------------------------------------------

/*------상속받아 콘트롤변수지정---------------------------------------------*/ 
 #include "xShadeButton.h"
 #include "SXButton.h"
 DDX_Control(pDX, IDC_ESTOP, m_EStop);
 m_EStop.SetIcon( IDI_ESTOP, 32, 32 );
 m_EStop.SetImagePos( CPoint ( 2, SXBUTTON_CENTER ) );
 m_EStop.SetTextPos( CPoint ( 28, SXBUTTON_CENTER ) );
 m_EStop.SetFont(&m_sFont);

/*------상속받아 콘트롤 설정  ---------------------------------------------*/ 
 #include "EditEx.h"
 CEditEx m_CmdPos[2];
 m_CmdPos[0].SubclassDlgItem(IDC_CMD_POS0, this);
 m_CmdPos[0].bkColor( BLACK );
 m_CmdPos[0].textColor( YELLOW );
 m_CmdPos[0].setFont( 10, FW_ULTRABOLD, DEFAULT_PITCH | FF_DONTCARE, _T("궁서"));
 m_CmdPos[0].SetWindowText("0.000");


 SetDlgItemDouble(IDC_CMD_POS0, cmd_pos[0]);


// 지정한 컨트롤에 값을 보여준다.
void CCAMCFS20Dlg::SetDlgItemDouble(int nID, double value)
{
 CString sTemp;
 sTemp.Format("%.3f", value);
 GetDlgItem(nID)->SetWindowText(sTemp);
}

// 지정한 컨트롤에서 값을 읽어온다.
double CCAMCFS20Dlg::GetDlgItemDouble(int nID)
{
 double dRet;
 CString sTemp;
 GetDlgItem(nID)->GetWindowText(sTemp);
 dRet = atof((LPCTSTR)sTemp);

 return dRet;
}

/*------EnableWindow--------------------------------------------------------*/
 EnableWindow(GetDlgItem(m_hDlg,IDC_BTN_START),FALSE);
 EnableWindow(GetDlgItem(m_hDlg,IDC_BTN_STOP),TRUE);

 char szBuf[256];
 SetDlgItemText(m_hDlg, IDC_MSG, "Server Running");
 GetDlgItemText(m_hDlg,IDC_LISTEN_EDIT,szBuf,256);
 
 int iPort = atoi(szBuf);
 memset(szBuf,0,256);

/*------EDIT CONTROL--------------------------------------------------------*/ 
void CWinDlg::WriteText(char* szData)
{
 HWND hWndOutput;
 int iChar;
 
 hWndOutput = GetDlgItem(m_hDlg, IDC_EDIT_BOARD);
 iChar = SendMessage(hWndOutput, EM_GETLIMITTEXT, 0, 0);
 SendMessage(hWndOutput, EM_SETSEL, iChar, iChar);
 SendMessage(hWndOutput, EM_REPLACESEL, FALSE, (LPARAM)szData);
 SendMessage(hWndOutput, EM_REPLACESEL, FALSE, (LPARAM)"\r\n");
}

/*------Control Key--------------------------------------------------------*/ 
 #define VK_NUMLOCK        0x90
 #define VK_SCROLL         0x91

 KeyCode=GetKeyState(VK_CONTROL);
 if((KeyCode==CONTROLKEY1)||(KeyCode==CONTROLKEY2)){bConKey=TRUE;}

/*------Read Only----------------------------------------------------------*/ 
 m_FileSaveAsButton[nCh].EnableWindow(FALSE);
 m_ItemSelectCombo[nCh].EnableWindow(nMode);
 m_SetRevCheckBox[nCh].EnableWindow(nMode);
 m_TestViasstatic[nCh].SetReadOnly(nMode);

/*------Slider------------------------------------------------------------*/

 m_SpotTopSlider.GetPos();//일반
// m_SpotLeftSlider.SetRange(0, 1024);//일반
 m_SpotLeftSlider.SetValue(140);    //NI 콘트롤

void CGraphResultPage3::OnPointerValueChangedSpotBottomSlider(long Pointer, VARIANT FAR* Value) 
{
 // TODO: Add your control notification handler code here
 int nData=0;
 nData = CNiVariant(Value);m_nSpotBottomLimit=nData;
}

/*------Message------------------------------------------------------------*/

// MessageBox(NULL,buf,title,MB_OK|MB_ICONEXCLAMATION);

// if (MessageBox("Module Aging Program Quit? ", " OLED Module Aging Program",
//  /*MB_ICONQUESTION*/MB_ICONSTOP | MB_OKCANCEL) == IDOK)  {
// OnClose();
// PostQuitMessage(0);
// }

 RedrawWindow();//Invalidate(FALSE);

/*------ 콘트롤 Bmp-------------------------------------------------------------------*/
 CBitmap m_ButtonBmp1;
 m_ButtonBmp1.LoadBitmap(IDB_SAVEBUTTONBMP);
 m_FileSaveAsButton[0].SetBitmap(m_ButtonBmp1);
 RedrawWindow();//Invalidate(FALSE);

/*------ 콘트롤 Enable----------------------------------------------------------------*/
 m_ccEdit1.SetReadOnly(TRUE);
 m_ccButton1.EnableWindow(TRUE);

 m_ccModeCheck1.ShowWindow(SW_SHOW); 
 m_ccModeCheck2.ShowWindow(SW_HIDE);
/*------------------------------------------------------------------------------------*/
/*------CT 콘트롤 제어----------------------------------------------------------------*/
 m_cttPosition11.SetBackColor(RGB(255,0,0));
 m_cttPosition11.SetForeColor(RGB(255,0,0));
 m_cttPosition11.SetCaption("-120.000");
 m_cttPosition11.ShowWindow(FALSE);

/*------NI 콘트롤 숨김----------------------------------------------------------------*/

 m_nctlTestButton1.ShowWindow(FALSE);//숨김

/*------NI Graph----------------------------------------------------------------*/

 m_ResultLineGraph1.GetAxes().Item(3.0).GetTicks().SetMajorTickColor(White);
 m_ResultLineGraph1.GetPlots().Item(2.0).SetLineColor(White);
 m_ResultLineGraph1.GetAxes().Item(1).GetLabels().SetColor(White);

 m_ResultLineGraph1.GetAxes().Item(1).AutoScaleNow();
 m_ResultLineGraph1.GetAxes().Item(2).AutoScaleNow();

 m_ResultLineGraph1.GetAxes().Item(1).SetMinMax(m_GraphScaleMin_x,m_GraphScaleMax_x);
 m_ResultLineGraph1.GetAxes().Item(2).SetMinMax(m_GraphScaleMin_y,m_GraphScaleMax_y);


//==================================================================================
/*------DlgList [..][]------------------------------------------------------------*/
  char szTemp[255];
     memset(szTemp, 0, 255);
     lstrcat(szTemp, "c:\\Data");
     CDialog::DlgDirList(szTemp, IDC_LISTBOX, NULL, DDL_EXCLUSIVE | DDL_DIRECTORY); 
 

/*----------------------------------List Box Text 얻기----------------------------*/
//=================================================================================
 CString strTmp="";
 int nListNo=m_ccName.GetCurSel();
 
 if(m_ccName.GetTextLen(nListNo)>0)
 {
  m_ccName.GetText(nListNo,strTmp);
 }

 m_ccModuleMeasureList.InsertString(nListNo,csFind);


 nListNo=m_ccImageList.GetCurSel();
 
 CString csFind;m_ccImageList.GetText(nListNo,csFind);
 nListNo=m_ccModuleMeasureList.GetCurSel();
 m_ccModuleMeasureList.DeleteString(nListNo);
 m_ccModuleMeasureList.InsertString(nListNo,csFind);
 
 
 int nListMax=flBox.GetCount();
 csTmp.Format("%d",nListMax); AfxMessageBox(csTmp);


 
//==================================================================================

/*----------------------------------Multi Edit 한줄씩 얻기----------------------------*/ 
 CString ReadData; CString strTmp="";
 GetDlgItemText(IDC_INSTRUCT_EDIT, ReadData);
 int index=0; int length=0;
 char chBuf[2];


 length = ReadData.GetLength();
 int nListCount=0;

 CString csLineData[CHMAX];
 CString csBuf=_T("");

 for(int i=0; i<length; i++)
 {
  csBuf=ReadData.Mid(i,1);
  if(csBuf=="\n")
  {
   csBuf=""; 
   nListCount++;
  }
  else
  {
   if(csBuf!="\r")
   {
   chBuf[0]=csBuf.GetAt(0);
   chBuf[1]='\0';
   csLineData[nListCount]+=chBuf;
   }
  }
 }

 for(int n=0; n<nListCount+1; n++)
 AfxMessageBox(csLineData[n]);


/*----------------------------------콘트롤 생성-------------------------------------*/
// CComboBox m_pComboBox[CHMAX];
// CEdit m_pEditBox[CHMAX];
// CListBox m_pListBox[CHMAX];
// CButton m_pButton[CHMAX];

 WS_THICKFRAME  콘트롤 크기 가변

 RECT ovlScrRect;
 m_Display.GetWindowRect(&ovlScrRect);
 ::CopyRect(&OverlayClientRect,&ovlScrRect);
 ScreenToClient(&OverlayClientRect);

 pVision->OutputOverlay(GetDC()->m_hDC,&ovlScrRect);
 UpdateOverlayWindow();


/* CStatic *m_static;
 m_static = new CStatic;
 m_static->Create(_T("스태틱"),
     WS_VISIBLE | SS_CENTER,
     CRect(10,10,210,40),
     this,
     ID_SAMPLE_STATIC1);
*/

 //리스트 박스 만들기
 RECT rect1={10,100,200,200};
 m_pListBox.Create(WS_CHILD | WS_VISIBLE | LBS_STANDARD,rect1,this,200);
 m_pListBox.ShowWindow(SW_SHOW);
 //데이터 삽입
 m_pListBox.AddString("data1");
 m_pListBox.AddString("data2");
 m_pListBox.AddString("data3");

 //에디터 박스 만들기
 RECT rect2={210,10,400,100};
 m_pEditBox.Create(
  WS_CHILD | WS_VISIBLE | 
  ES_MULTILINE //여러 라인 입력
  | ES_AUTOHSCROLL | ES_AUTOVSCROLL| //자동 수직,수평 스크롤
  WS_BORDER |WS_VSCROLL,//외곽선과 수직 수크롤바 설정
    rect2,this,300);
 m_pEditBox.ShowWindow(SW_SHOW);

 //콤보박스 만들기
 RECT rect3={210,200,400,300};//콤보박스 출력 위치
 //윈도우 만들기
 m_pComboBox.Create(WS_CHILD | WS_VISIBLE|CBS_DROPDOWN ,rect3,this,400);
 m_pComboBox.ShowWindow(SW_SHOW);
 //콤보박스에 데이터를 넣는다.
 m_pComboBox.AddString("cdata1");
 m_pComboBox.AddString("cdata2");
 m_pComboBox.AddString("cdata3");


/*------KeyBoadData------------------------------------------------------------------*/

void CTESTView::OnChar(UINT nChar, UINT nRepCnt, UINT nFlags) 
{
 // TODO: Add your message handler code here and/or call default
 
 CString csText=_T("");

 csText=nChar;
 AfxMessageBox(csText);

 CFormView::OnChar(nChar, nRepCnt, nFlags);
}


/*------SendDlgItemMessage------------------------------------------------------------*/
 SendDlgItemMessage(IDC_STATIC_WLREM, WM_SETTEXT,0,(LPARAM)(LPSTR)"DATA NONE");

/*-------라디오버튼-------Radio button------------------------------------------------*/
//-------------------------------------------------------------------------------------

 tmModel.PCBType    = (rbSata.GetCheck()?0:1);
 tmModel.Rotate     = (rbRetn.GetCheck()?false:true);
 tmModel.ScrewCheck = (rbNChk.GetCheck()?false:true);
 tmModel.ScrewType  = (rbTyp1.GetCheck()?0:1);

 m_Select11.SetCheck(TRUE);
 m_Select11.SetCheck(FALSE);

 m_ccModeCheck3.SetWindowText("Photo(uA)");

 radio button 
 변수 생성시 Gruop 지정

 0  : on
        -1 : off

 CNiPlot3D::PlotStyles style=m_Graph3D.GetPlots().Item(1).GetStyle();
 m_Point.SetCheck((style == CNiPlot3D::PlotStyles::Point)? 1 : 0);
 m_Line.SetCheck((style == CNiPlot3D::PlotStyles::Line)? 1 : 0);
 m_LinePoint.SetCheck((style == CNiPlot3D::PlotStyles::LinePoint)? 1 : 0);

/*------------List Box 변수 선언 대입------------------------------------------------*/
 
 CListBox  m_ListBox[4];

 m_ListBox[0].SubclassDlgItem(IDC_LIST1, this);
 m_ListBox[1].SubclassDlgItem(IDC_LIST2, this);
 m_ListBox[2].SubclassDlgItem(IDC_LIST3, this);
 m_ListBox[3].SubclassDlgItem(IDC_LIST4, this);

 m_ListBox[i].EnableWindow(FALSE);
 m_ListBox[port-1].AddString(m_strReceived[port-1]);
 m_ListBox[port-1].SetSel(m_ListBox[port-1].GetCount()-1, TRUE);

 m_ListBox[0].ResetContent();//clear


 m_ccModuleMeasureList.InsertString(nListNo,csFind);
//---List Control 빈문자 에러방지---------------------------------------------------
 if(m_ccName.GetCount()>0)
 {
   m_ccName.SetCurSel(m_nListCurrentNo);
   
    if(m_ccName.GetTextLen(m_ccName.GetCurSel())>0)
    {
    m_ccName.GetText(m_ccName.GetCurSel(),strTmp);
    m_csName=strTmp;
    }
    else
    {
    m_csName=_T("");
    }

   strTmp.Format("%d / %d", m_nListCurrentNo, m_nListMaxCount);
   SetDlgItemText(IDC_PAGEMODEL, strTmp); 
   }
// m_ccModule_A_JobList.SetItemHeight(nListMaxCount,LISTHIGH2);//넓게 표시

/*----------------------------Check Box On/Off제어---------------------------------*/
 
 m_ccCheck.SetCheck(TRUE);//ON
 m_ccCheck.SetCheck(FALSE);//OFF

/*----------------------------------커서 활성-------------------------------------*/
 
 m_clbName.SetFocus();

/*----------------------------------콘트롤 보이기 숨기기--------------------------*/
 m_TestButton.ShowWindow(SW_HIDE);//(FALSE) 
 m_TestButton.ShowWindow(SW_SHOW);//(TRUE)

/*------------콘트롤 생성--------------------------------------------------------*/
 public:
 CListBox m_pListBox;

 RECT rect={10,100,200,200};

 m_pListBox.Create(WS_CHILD|WS_VISIBLE|LBS_STANDARD,rect,this,200);
 m_pListBox.ShowWindow(SW_SHOW);
 m_pListBox.AddString("data1");
 m_pListBox.AddString("data2");
 m_pListBox.AddString("data3");

// m_ccName.GetText(m_ccName.GetCurSel(),strTmp);

/*------------콤보BOX Text제어--------------------------------------------------*/

 CString csTmp;
 int nNo=m_ccPalletSelect.GetCurSel();
 m_ccPalletSelect.GetLBText(nNo,csTmp);
 AfxMessageBox(csTmp);

 for(i=0; i<10; i++)
 {
 m_ccCombo.DeleteString(i);
 csText.Format("%dH:",i);
 m_ccCombo.InsertString(i,csText);
 }

/*------List Control-------------------------------------------------------------*/
 CString csTmp;
 m_ccNameList.AddString("DATA 1");

 m_ccNameList.SetCurSel(0);
 m_ccNameList.GetText(m_ccNameList.GetCurSel(),csTmp);

 
 if(m_cliItemName.GetTextLen(m_cliItemName.GetCurSel())>0)
 {
 m_cliItemName.GetText(m_cliItemName.GetCurSel(),csTmp);
 m_csItemName=csTmp;
 }
 
 for(i=m_ccName.GetCount()-1;i>=0;i--) 
 {m_ccName.DeleteString(i);}

 if(m_cliItemName.GetCount()>0)
 {
  if(m_cliItemName.GetTextLen(m_nCurrentModelNo-1)>0)
  {
   m_cliItemName.GetText(m_nCurrentModelNo-1,strTmp);
  }

  SearchModelItemName(strTmp, false);
 }

/*--------------------Edit-> 리스트Box로 사용-----------------------------------*/ 
void CFOOLPROOFView::Status_display(CString sdisplay)
{
      //Edit -Control
 if ( m_ComDisplay.GetLineCount() > 5)
 {
  m_ComDisplay.SetSel(0, -1);
  m_ComDisplay.Clear();
 }
 
 sdisplay+="\r\n";
 m_ComDisplay.ReplaceSel(sdisplay); 
 
/*--------------------Edit-> 커서 생성-----------------------------------------*/ 
 m_clbEdit.SetFocus();

}

//-------------Edit->GetWindowText----------------------------------------------------//
//-----------------------------------------------------------------------------------//
//--unsigned char-> CString ,  unsigned char-> char----------------------------------

 int Length= m_ccEdit1.GetWindowTextLength();
 unsigned char *temp = NULL;
 temp = new unsigned char [Length];

 char temp2[2]; CString csText;
 m_ccEdit1.GetWindowText((LPSTR)temp,255);

 for(int i=0; i<Length; i++)
 {
  temp2[0]=temp[i]; temp2[1]='\0';
  csText+=(LPSTR)temp2;
 }

 AfxMessageBox(csText);

//----------------------------------------------------
 char temp[255];
 for(int i=0; i<255; i++) temp[i]='\0';

 GetDlgItemText(IDC_EDIT1,(LPSTR)temp,255);
 GetDlgItemText(IDC_EDIT1,(char*)temp,255);
 CString csText=(LPSTR)temp;
 AfxMessageBox(csText);

//-----------------------------------------------------------------------------------//
/*-------------Control에 고유번호 부여 호출-----------------------------------*/
 CString Buf;
 CString data; 
 CString BufSET;

 int No=1001; /*Resource.h -#define  IDC_EDIT  1001 */
 int No2=1004;

 data="A1입니다";
 SetDlgItemText(No,data);

 GetDlgItemText(No2,BufSET);
 AfxMessageBox(BufSET);

 UpdateData(FALSE);
/*----------------콘트롤에서 직접 text 얻기----------------------------------*/
 GetDlgItemText(IDC_SELECT_NAME_SCHOOL_YEAR1, csName);
 SetDlgItemText(IDC_PAGEMODEL, strText);


 //===========================================
 CString strRX, strRY;

 CStatic *pRX, *pRY;
 pRX = (CStatic *)GetDlgItem(IDC_LBL_RESULTX);
 pRY = (CStatic *)GetDlgItem(IDC_LBL_RESULTY);
 pRX->GetWindowText(strRX);
 pRY->GetWindowText(strRY);
/*------------------------FluxGrid 텍스트 중앙위치---------------------------*/
 m_GridData.SetCellAlignment(4);

/*-------------------StatusBar, 상태바---------------------------------------*/
void CMainFrame::DisplayMessage(CPoint point)
{
 CString msg;
 msg.Format("마우스 위치 : (%d, %d)",
  point.x, point.y);
 m_wndStatusBar.SetWindowText(msg);

 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
 CRect rc;
        pFrame->m_wndStatusBar.GetItemRect (0, rc);

 pFrame->m_wndStatusBar.SetWindowText(csMsg);
}

/*-------------------ProgressBar----------------------------------------------*/

 // ProgressBar표시를 위한 부분 
 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
 pFrame->m_pProgressBar.SetRange(0, height-tHeight);
 pFrame->m_pProgressBar.SetStep(1);
 CRect rc;
        pFrame->pStatusBar->GetItemRect (0, rc); 
 pFrame->m_pProgressBar.MoveWindow(&rc);

 pFrame->m_pProgressBar.StepIt();

//---------------------------------------------------------------------------*/

 
void CColorView::OnMouseMove(UINT nFlags, CPoint point) 
{
 //#include "MainFrm.h"
 CMainFrame *pWnd = (CMainFrame*) AfxGetMainWnd();
 pWnd->DisplayMessage(point);
 CView::OnMouseMove(nFlags, point)
}

/*------------------------------SPIN Button 범위 지정--------------------*/

 1-12 까지 범위지정
void CDBdeleteDlg::OnDeltaposMonthStartSpin(NMHDR* pNMHDR, LRESULT* pResult) 
{
 NM_UPDOWN* pNMUpDown = (NM_UPDOWN*)pNMHDR;
 // TODO: Add your control notification handler code here
 UpdateData(TRUE);
 pNMUpDown->iPos = 0;
 m_MonthStartEdit -= (pNMUpDown->iDelta);
 if (m_MonthStartEdit<1)
 {
  m_MonthStartEdit = 1;
 }
 else if (m_MonthStartEdit>12)
 {
  m_MonthStartEdit = 1;
 }
 
 UpdateData(FALSE);

 *pResult = 0;
}
/*------------------------------콘트롤 화면 확장 --------------------*/

void CModel::ExpandyaContract()
{
 CRect rcDlg, rcMarker;
 GetWindowRect(rcDlg); 
 
 if (!m_bExpanded)
 {
  m_nExpandedWidth = rcDlg.Width(); 
  m_Devide.GetWindowRect(rcMarker); 
  m_nNormalWidth = (rcMarker.right - rcDlg.left);
  rcDlg.SetRect(rcDlg.left, rcDlg.top,    rcDlg.left + m_nNormalWidth+12,
   rcDlg.top + rcDlg.Height()); 
  HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
 
  while (hWndChild != NULL)
  {  
   hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
   ::EnableWindow(hWndChild, m_bExpanded);
  }
 }
 
 else 
 {
  rcDlg.SetRect( rcDlg.left, rcDlg.top,    rcDlg.left + + m_nExpandedWidth,
   rcDlg.top + rcDlg.Height() ); 
  HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
  
  while (hWndChild != NULL)
  {  
   hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
   ::EnableWindow(hWndChild, m_bExpanded);
  }
  
 } 
 
 MoveWindow(rcDlg, TRUE);
 
 m_bExpanded = !m_bExpanded;


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// -    HDC 얻기    -  ////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

 CMainFrame *pFrame= (CMainFrame*)AfxGetMainWnd();ASSERT(pFrame);
 pFrame->m_flagTemplate = TRUE;
 

 CRect rect;rect.left=0;rect.right=100;rect.top=0;rect.bottom=200;

 CDC *pDC; pDC = GetDC();
 DrawRect(pDC, rect, RGB(0,0,255), 2);


 CClientDC pDC(this);
 DrawRect(&pDC, rect, RGB(0,0,255), 2);

 
 HWND hParent = ::GetParent(m_hWnd);


 CMainFrame* pWnd = (CMainFrame*)AfxGetApp()->m_pMainWnd;
 HDC hDC = GetDC(pWnd->m_hWnd);

 CDC *pDC; pDC = GetDC();
 EraseBkgnd(pDC,m_CamRect,m_DisRect);


 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
 CDC *pDC =pFrame->GetDC();

 StretchDIBits(pDC->GetSafeHdc(),20,20,width,height, 
 0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);


 CPaintDC dc(this); // device context for painting
 int width=m_CamRect.right; int height=m_CamRect.bottom; 
 // TODO: Add your message handler code here
 CPaintDC dcView(GetDlgItem(IDC_IMG_HISTO_VIEW));
 
 CRect rect;
 GetDlgItem(IDC_IMG_HISTO_VIEW)->GetClientRect(&rect);
 StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom, 0, 0, 
  width, height, m_pTestBitmap, &m_pBitmapInfo, BI_RGB, SRCCOPY);

 CRect rect;
 GetDlgItem(IDC_IMG_HISTO_VIEW)->GetWindowRect(&rect);
 ScreenToClient(rect);
 InvalidateRect(&rect, FALSE);


 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
 //CChildFrame *pFrame = (CChildFrame *)AfxGetMainWnd();

// CPaintDC *pDC;
 CDC *pDC =pFrame->GetDC();

 CVisionSysView* pView =( CVisionSysView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
 CVisionSysDoc *pDoc=pView->GetDocument();
 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// CDC *pDC =pFrame->GetDC();
 CDC *pDC =pView->GetDC();

/*-------------- HDC 얻기------------------------------------------------------------*/

CWnd *pWnd = GetDlgItem(IDC_CAMERA_VIEW);


void CGraphResultPage3::DrawBitmap()
{
 if (m_buf==NULL) return;

 CRect rect;
 GetDlgItem(IDC_IMG_HISTO_VIEW)->GetWindowRect(&rect);
 ScreenToClient(rect);
 InvalidateRect(&rect, FALSE);
}

void CGraphResultPage3::OnPaint() 
{
 CPaintDC dc(this); // device context for painting
 
 // TODO: Add your message handler code here
 if (m_buf==NULL) return;

 BYTE *tmp;
 // DWORD-align for display
 tmp = JpegFile::MakeDwordAlignedBuf(m_buf,m_width,m_height,&m_widthDW);
 // set up a DIB 
 BITMAPINFOHEADER bmiHeader;
 bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
 bmiHeader.biWidth = m_width;  bmiHeader.biHeight = m_height;
 bmiHeader.biPlanes = 1;    bmiHeader.biBitCount = 24;bmiHeader.biCompression = BI_RGB;
 bmiHeader.biSizeImage = 0;   bmiHeader.biXPelsPerMeter = 0;
 bmiHeader.biYPelsPerMeter = 0;bmiHeader.biClrUsed = 0;
 bmiHeader.biClrImportant = 0;// CRect rect;

 int width=bmiHeader.biWidth; int height=bmiHeader.biHeight; 
 
 CPaintDC dcView(GetDlgItem(IDC_IMG_HISTO_VIEW));
 dcView.SetStretchBltMode(STRETCH_DELETESCANS);

 CRect rect;
 GetDlgItem(IDC_IMG_HISTO_VIEW)->GetClientRect(&rect);
 StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom, 
  0, 0,width, height, tmp, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
 delete [] tmp;
 // Do not call CPropertyPage::OnPaint() for painting messages
}

/*-------------- HDC 얻기------------------------------------------------------------*/
 CDC *theDC = GetDC();

 if (theDC!=NULL) {

  CRect clientRect;
  GetClientRect(clientRect);

  // Center It
  UINT left = (clientRect.Width() - m_width) / 2;
  UINT top = (clientRect.Height() - m_height) / 2;

  // a 24-bit DIB is DWORD-aligned, vertically flipped and 
  // has Red and Blue bytes swapped. we already did the 
  // RGB->BGR and the flip when we read the images, now do
  // the DWORD-align

  BYTE *tmp;
  // DWORD-align for display
  tmp = JpegFile::MakeDwordAlignedBuf(m_buf,
           m_width,
           m_height,
           &m_widthDW);
  // set up a DIB 
  BITMAPINFOHEADER bmiHeader;
  bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
  bmiHeader.biWidth = m_width;
  bmiHeader.biHeight = m_height;  bmiHeader.biPlanes = 1;
  bmiHeader.biBitCount = 24;
  bmiHeader.biCompression = BI_RGB;
  bmiHeader.biSizeImage = 0;
  bmiHeader.biXPelsPerMeter = 0;
  bmiHeader.biYPelsPerMeter = 0;
  bmiHeader.biClrUsed = 0;
  bmiHeader.biClrImportant = 0;

  //---------------------------------------------
   theDC->SetStretchBltMode(STRETCH_DELETESCANS);
  //---------------------------------------------
  // now blast it to the CDC passed in.
  // lines returns the number of lines actually displayed

  int lines = StretchDIBits(theDC->m_hDC,
         BMP_START_EDGE_X1,BMP_START_EDGE_Y1,
         512,
         384,
         0,0,
         bmiHeader.biWidth,
         bmiHeader.biHeight,
         tmp,
         (LPBITMAPINFO)&bmiHeader,
         DIB_RGB_COLORS,
         SRCCOPY);

  delete [] tmp;

  CString info;
  info.Format("(%d x %d)", m_width, m_height);
  theDC->SetBkMode(TRANSPARENT);
  theDC->SetTextColor(RGB(0,0,0));
  theDC->TextOut(10,5, info);
 
  ReleaseDC(dc);

/*-------------- 다일로그/Propet 꽉찬 화면출력 화면-----------------------------------------*/

int CSETDlg::OnCreate(LPCREATESTRUCT lpCreateStruct) 
{
 if (CDialog::OnCreate(lpCreateStruct) == -1)
  return -1;
 
 // TODO: Add your specialized creation code here
  ShowWindow(SW_SHOWMAXIMIZED);///화면  확대
  UpdateWindow();            
 return 0;
}

/*-------------- Dialog를 메인화면으로 사용-----------------------------------------*/

 #include "commtestDlg.h"

BOOL CCommtestApp::InitInstance()
{
 // Standard initialization
 // If you are not using these features and wish to reduce the size
 //  of your final executable, you should remove from the following
 //  the specific initialization routines you do not need.

 #ifdef _AFXDLL
 Enable3dControls();   // Call this when using MFC in a shared DLL
 #else
 Enable3dControlsStatic(); // Call this when linking to MFC statically
 #endif

 CCommtestDlg dlg;
 m_pMainWnd = &dlg;
 dlg.DoModal();

 // Since the dialog has been closed, return FALSE so that we exit the
 //  application, rather than start the application's message pump.
 return FALSE;
}
/*----------------------------------------------------------------------------------*/
 MainFrame *pFrame=(CMainFrame*)AfxGetMainWnd();
 CChildFrame *pChild=(CChildFrame*)pFrame->GetActiveFrame();
 CWinColorDoc *pDoc=(CWinColorDoc*)pChild->GetActiveDocument();
 CWinColorView *pView=(CWinColorView*)pChild->GetActiveView();
/*-------------- View 에서 App 얻기------------------------------------------------*/

 CSECKLineDVM2App* pApp = (CSECKLineDVM2App*)AfxGetApp();
 pApp->SetSerialInfo();


/*-------------- Doc 에서 View 얻기------------------------------------------------*/
 CServerNetWorkView *pView=(CServerNetWorkView *)((CMainFrame *)AfxGetMainWnd())->GetActiveView ();
 pView->Status_display(lpszMessage);


/*-------------- View에서  Doc 얻기------------------------------------------------*/
 CSECKLineDVM2Doc* pDoc = GetDocument();
  
 pDoc->
/*--------------메인프레임에서 View, Doc 얻기-------------------------------------*/
 CSECKLineDVM2View* pView =
 (CSECKLineDVM2View* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();

 pView->
 
 CCSECKLineDVM2MultiDoc *pDoc;
 pDoc=pView->GetDocument();

 pDoc->

/*--------------다일로그에서  View, MainFrame, Doc 얻기---------------------------*/
        ..Dlg.h화일에 참조선언
        #include "SECKLineDVM2MultiDoc.h"

        ..Dlg.cpp화일에 참조선언
        #include "CSECKLineDVM2MultiView.h"
        #include "MainFrm.h"

 CSECKLineDVM2MultiView *pView=(CSECKLineDVM2MultiView *)((CMainFrame *)AfxGetMainWnd())->GetActiveView ();
 pView->

 CMainFrame* pFrame;
 pFrame = (CMainFrame*)AfxGetApp()->m_pMainWnd;
 
 pFrame->

 CSECKLineDVM2View* pView =( CSECKLineDVM2View* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
 CSECKLineDVM2Doc *pDoc;
 pDoc=pView->GetDocument();

 pDoc->

/*----------------------------다일로그 호출 종료----------------------------------*/
 CProgressDlg Dlg;
 Dlg.Create();
 Dlg.DestroyWindow();

 //--------------
 EndDialog(IDOK);
 CDialog::OnCancel();
 EndDialog(IDCANCEL);
 //--------------

/*------------------------MessageBox 선택-----------------------------------------*/
 if (AfxMessageBox("모델코드를 찾지 못했습니다.!\n모델을 입력 하시겠습니까?.", MB_YESNO) == IDYES)
 {
 }
 else
 {
 return;
 }

/*-------------화면갱신----------------------------------------------------------*/

 Invalidate(TRUE); 
 RedrawWindow();

/*-------------------------------------------------------------------------------*/

/*------------타이틀 제목 없애기-------------------------------------------------*/
BOOL CMainFrame::PreCreateWindow(CREATESTRUCT& cs)
{
 if( !CFrameWnd::PreCreateWindow(cs) )
  return FALSE;
 // TODO: Modify the Window class or styles here by modifying
 //  the CREATESTRUCT cs
 cs.style^=FWS_ADDTOTITLE; //제목 없음 없에기
 return TRUE;

 cs.style = WS_SYSMENU | WS_CAPTION | WS_MINIMIZEBOX | WS_MAXIMIZE;
 cs.lpszName = " WASS-2000 Scanning System";
 cs.x = cs.y = 0;
 cs.cx = rct.right;
 cs.cy = rct.bottom;

}

/*----------------------전체 화면 출력 위치조정------------------------------*/
 cs.x=200; cs.y=200; cs.cx=400; cs.cy=400;

/*----------------------다일로그 디스플레이 위치 변경------------------------*/
CExpansionDlg1* g_pExpansion = NULL;

 if(!g_pExpansion)
 {
    g_pExpansion = new CExpansionDlg1(this);
    g_pExpansion->MoveWindow(50,387,354,320,true);//x,y,with,high
    Invalidate(TRUE);
 }

/*------------------프로그램 종료--------------------------------------------*/
 윈도우 "x" 종료 (도큐먼트에 설정)


void CMainFrame::OnClose() 
{
 // TODO: Add your message handler code here and/or call default
 
 if (MessageBox("프로그램을 종료 하시겠습니까? ", " 재고관리프로그램",
  /*MB_ICONQUESTION*/ MB_ICONSTOP | MB_OKCANCEL) == IDOK)  {
  PostQuitMessage(0);
  CFrameWnd::OnClose();
 } 
}

BOOL CScrubDoc::SaveModified() 
{
 // TODO: Add your specialized code here and/or call the base class
 if(AfxMessageBox("프로그램을 종료하시겠습니까?",MB_ICONQUESTION|MB_YESNO)==IDYES)
 {
 OnClose();
 PostQuitMessage(0);
 //((CMainFrame*)AfxGetApp()->m_pMainWnd)->SendMessage(WM_CLOSE,0,0);

 }
 else
 {
  return 0;
 }

/* CMainFrame* m_pMainWnd;
 CMainWidowCloseDoc* pDataDoc = GetDocument();
 
 if(IDOK==AfxMessageBox("프로그램을 종료하시겠습니까?",MB_OKCANCEL))
 
 m_pMainWnd->OnClose;
 pDataDoc->OnCloseDocument();
*/ return CDocument::SaveModified();
}
{
 if(AfxMessageBox("프로그램을 종료하시겠습니까?",MB_ICONQUESTION|MB_YESNO)==IDYES)
 {
 OnClose();
 PostQuitMessage(0);
 }
 else
 {
  return;
 }
}

/*--------------------프로그램 종료-------------------------------------------*/
 ::ExitProcess(-1);

/*--------------------프린트다일로그 않보이고 바로 출력하기-------------------*/
BOOL CManagementView::OnPreparePrinting(CPrintInfo* pInfo)
{
 // default preparation
 pInfo->m_bDirect=TRUE;
 return DoPreparePrinting(pInfo);
}
/*---------------------------다일로그 호출-----------------------------------*/
 CMyGraphDemoDlg dlg;
 int nResponse = dlg.DoModal();
 if (nResponse == IDOK)
 {
  // TODO: Place code here to handle when the dialog is
  //  dismissed with OK
 }
 else if (nResponse == IDCANCEL)
 {
  // TODO: Place code here to handle when the dialog is
  //  dismissed with Cancel
 }

/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - Windows 제 어  -  ////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

/*-----------------------------------------------------------------------------------*/
/*-------------- 다일로그 크기조절            ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/

 SetWindowText("Image View");
 MoveWindow(50, 50,400,300); //x위치, y위치, x Size, y Size

/*-----------------------------------------------------------------------------------*/
/*-------------- 윈도우 항상 위에 활성        ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
BOOL CMainFrame::PreCreateWindow(CREATESTRUCT& cs)
{
 cs.dwExStyle = WS_EX_TOPMOST;
}


/*-----------------------------------------------------------------------------------*/
/*-------------- Menu Bar를 지우기            ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
 
 CMenu* pMenu = new CMenu;
 pMenu->Attach(cs.hMenu);
 pMenu->DestroyMenu();
 cs.hMenu = NULL;
 delete pMenu;
 
/*-----------------------------------------------------------------------------------*/
/*-------------- 화면 갱신                    ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/

 CStatic m_PcbImageView;
 CRect  m_rectLargeCanvas;

 m_PcbImageView.GetWindowRect(&m_rectLargeCanvas);
 ScreenToClient(&m_rectLargeCanvas);
 InvalidateRect(m_rectLargeCanvas,FALSE);
 //===============================================

 Invalidate(TRUE);Invalidate(false);
 RedrawWindow();
 UpdateAllViews(FALSE);
        UpdateData(FALSE);

/*------Hot Key------------------------------------------------------------*/ 
//--------------------------------------------------------------------------
BOOL CBroadView::PreTranslateMessage(MSG* pMsg) 
{
 // TODO: Add your specialized code here and/or call the base class
 if (pMsg->message==MM_MCINOTIFY) {
  if (pMsg->wParam==MCI_NOTIFY_SUCCESSFUL) {
   StopWav();
  }
 }
 if (pMsg->message==MY_MSG_FIRE_OFF) {
  FireOff();
 }
 if (pMsg->message==WM_KEYDOWN) {
  if (GetAsyncKeyState(VK_F1)&0x8000) {
   if (GetAsyncKeyState(VK_F5)&0x8000) {
    if (GetAsyncKeyState(VK_F9)&0x8000) {
     if (m_SetupBtn.IsWindowVisible()==FALSE) {
      FuncBtnShow(SW_SHOW);
     }
    }
   }
  }

  // 2007.2.15
  if (GetAsyncKeyState(VK_F6)&0x8000){m_bPingViewChk=TRUE;Invalidate(FALSE);SetTimer(REDRAW_TIMER,2000,NULL);}//RedrawWindow();

 }

 return CFormView::PreTranslateMessage(pMsg);
}
/*-------------- 메인프레임 상속 받아 다일로그 호출-----------------------------------------*/
//--------------------------------------------------------------------------------------------
void ResultShowDlgBar(CString str)
{
 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
 CRect rect; 
 pFrame->GetWindowRect(&rect);

 if (!pFrame->m_ResultShowBar.IsWindowVisible())
 {
  pFrame->DockControlBar(&pFrame->m_ResultShowBar);
  pFrame->m_ResultShowBar.ShowWindow(SW_SHOW);
  pFrame->FloatControlBar(&pFrame->m_ResultShowBar,CPoint(rect.right-324,rect.bottom-125));
 }


 CEdit *pEdit = (CEdit *)pFrame->m_ResultShowBar.GetDlgItem(IDC_RESULTSHOW);
 int nLength = pEdit->GetWindowTextLength();
 
 if(nLength<10000) pEdit->SetSel(nLength, nLength);
 else pEdit->SetSel(nLength-10000, nLength);
 pEdit->ReplaceSel(str);
 pFrame->RecalcLayout();

}

/*-----------------------------------------------------------------------------------*/
/*-------------- Extern File에서 다일로그제어 ---------------------------------------*/
/*-----------------------------------------------------------------------------------*/
#include "TestDlg.h"
CTestDlg *TestDlg; 
TestDlg=NULL;

 if(TestDlg->GetSafeHwnd() == NULL) 
 {
  TestDlg= new CTestDlg;
  TestDlg->Create(IDD_TESTDIALOG1);
  //manu_Swstatus = MENU_MANUAL;//3
 }
 TestDlg->ShowWindow(FALSE);
// TestDlg->SetDlgItemText(IDC_DLGSTATIC,"TEST 2006.12");
 TestDlg->m_csData="Dlg Text 2006";


 if(TestDlg->GetSafeHwnd() != NULL) TestDlg->ShowWindow(true);


 if(TestDlg->GetSafeHwnd() != NULL)
 {
  CString csTmp;
  TestDlg->GetDlgItemText(IDC_DLGSTATIC,csTmp);
  AfxMessageBox(csTmp);
 }

 //============================================================
 void ResultShowDlgBar(CString str)
 {
 CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
 CRect rect; 
 pFrame->GetWindowRect(&rect);

 if (!pFrame->m_ResultShowBar.IsWindowVisible())
 {
  pFrame->DockControlBar(&pFrame->m_ResultShowBar);
  pFrame->m_ResultShowBar.ShowWindow(SW_SHOW);
  pFrame->FloatControlBar(&pFrame->m_ResultShowBar,CPoint(rect.right-324,rect.bottom-125));
 }


 CEdit *pEdit = (CEdit *)pFrame->m_ResultShowBar.GetDlgItem(IDC_RESULTSHOW);
 int nLength = pEdit->GetWindowTextLength();
 
 if(nLength<10000) pEdit->SetSel(nLength, nLength);
 else pEdit->SetSel(nLength-10000, nLength);
 pEdit->ReplaceSel(str);
 pFrame->RecalcLayout();
}
/*-----------------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------------*/
/*-------------- 다일로그 확장-------------------------------------------------------*/

 int m_nNormalWidth;
 int m_nExpandedWidth;
 BOOL m_bExpanded;

   void  CExpandDlgDlg::ExpandyaContract()
   {
 CRect rcDlg, rcMarker;
 GetWindowRect(rcDlg); 
 
 if (!m_bExpanded)
 {
  m_nExpandedWidth = rcDlg.Width(); 
  m_Devide.GetWindowRect(rcMarker); 
  m_nNormalWidth = (rcMarker.right - rcDlg.left);
  rcDlg.SetRect(rcDlg.left, rcDlg.top,    rcDlg.left + m_nNormalWidth+12,
   rcDlg.top + rcDlg.Height()); 
  HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
 
  while (hWndChild != NULL)
  {  
   hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
   ::EnableWindow(hWndChild, m_bExpanded);
  }

 }
 
 else 
 {
  rcDlg.SetRect( rcDlg.left, rcDlg.top,    rcDlg.left + + m_nExpandedWidth,
   rcDlg.top + rcDlg.Height() ); 
  HWND hWndChild = ::GetDlgItem(m_hWnd, IDC_STATIC_DEVIDE);
  
  while (hWndChild != NULL)
  {  
   hWndChild = ::GetNextWindow(hWndChild, GW_HWNDNEXT);
   ::EnableWindow(hWndChild, m_bExpanded);
  }
  
 } 
 
 MoveWindow(rcDlg, TRUE);
 
 m_bExpanded = !m_bExpanded; 
 

  }

/*-----------------------------------------------------------------------------------*/
/*-------------- 투명 다일로그-------------------------------------------------------*/
#define WS_EX_LAYERED 0x00080000 
#define LWA_COLORKEY 1 // Use color as the transparency color.
#define LWA_ALPHA    2 // Use bAlpha to determine the opacity of the layer

typedef BOOL (WINAPI *lpfn) (HWND hWnd, COLORREF cr, BYTE bAlpha, DWORD dwFlags);
lpfn g_pSetLayeredWindowAttributes;


 HMODULE hUser32 = GetModuleHandle(_T("USER32.DLL"));
     g_pSetLayeredWindowAttributes = (lpfn)GetProcAddress(hUser32, "SetLayeredWindowAttributes");
    HWND m_hCurrWnd;    //  Handle to the window over which the mouse was last present
 m_hCurrWnd=*this;
    if  (g_pSetLayeredWindowAttributes)
    {
          ::SetWindowLong(m_hCurrWnd, GWL_EXSTYLE, GetWindowLong(m_hCurrWnd, GWL_EXSTYLE) | WS_EX_LAYERED);
          g_pSetLayeredWindowAttributes(m_hCurrWnd, 50, 100, LWA_ALPHA);
 }
/*-----------------------------------------------------------------------------------*/
/*-------------- Windows 이벤트------------------------------------------------------*/
        #define define WSA_ASYNC    (WM_USER+1)
 //.h-----------------------------------
 protected:
   //{{AFX_MSG(CHDDINSPView)
   afx_msg LONG UDPOnReceive(UINT,LONG);

 //.cpp----------------------------------
 BEGIN_MESSAGE_MAP(CHDDINSPView, CFormView)
  //{{AFX_MSG_MAP(CHDDINSPView)
   //}}AFX_MSG_MAP
  ON_MESSAGE(WSA_ASYNC,UDPOnReceive)

 LONG CHDDINSPView::UDPOnReceive(UINT wParam, LONG lParam)
 {
 }

/*-----------------------------------------------------------------------------------*/
/*-------------- 스레드에서 변수 참조------------------------------------------------*/

UINT RepeatThread(LPVOID pFuncData)
{
 CCAMCFS20Dlg *pParent = (CCAMCFS20Dlg *)pFuncData; 
 INT16 nAxis;
 double dDistance, dVelocity, dAccel;

 nAxis  = pParent->m_nAxis;
 dDistance = pParent->GetDlgItemDouble(IDC_DISTANCE);
 dVelocity = pParent->GetDlgItemDouble(IDC_VELOCITY);
 dAccel  = pParent->GetDlgItemDouble(IDC_ACCELERATION);
 pParent->bRepeatFlag = TRUE;
}

void CWinColorView::OnDraw(CDC* pDC)
{
 CWinColorDoc* pDoc = GetDocument();
 ASSERT_VALID(pDoc);

 // TODO: add draw code for native data here
 if(pDoc->m_InImg==NULL) return;

 height = pDoc->dibHi.biHeight;
 width = pDoc->dibHi.biWidth;
 rwsize = WIDTHBYTES(pDoc->dibHi.biBitCount*pDoc->dibHi.biWidth);
 BmInfo->bmiHeader = pDoc->dibHi;

 SetDIBitsToDevice(pDC->GetSafeHdc(),0,0,width,height,
      0,0,0,height,pDoc->m_InImg,BmInfo, DIB_RGB_COLORS);
}


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// -    기타 정리    -  ///////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

//------프로그램 폴더안에 include화일 참조 선언 -----------------------------------------//
#include "../include/PortInclude.h"

//---------------------------------------------------------------------------------------//


//---시간 계산---------------------------------------------------------------------------// 
double m_lStartTimeOneChipCycle = GetCurrentTime();
double m_lEndTimeOneChipCycle = GetCurrentTime();
double m_OneCycleTime=(m_lEndTimeOneChipCycle - m_lStartTimeOneChipCycle) * 0.001;
//---------------------------------------------------------------------------------------//

/*----------------------------------시간 얻기-------------------------------------*/
 COleDateTime ccTestTime;
 CString strTmp;

 ccTestTime=COleDateTime::GetCurrentTime();
// strTmp=ccTestTime.Format("%I:%M:%S %p");
 strTmp=ccTestTime.Format("%I:%M:%S");
 m_clbTime.SetCaption(strTmp);

 int nTime;
 COleDateTime odtDate=COleDateTime::GetCurrentTime();
 nTime=odtDate.GetYear();
 nTime=odtDate.GetMonth();
 nTime=odtDate.GetDay();
 nTime=odtDate.GetHour();
 nTime=odtDate.GetMinute();
 nTime=odtDate.GetSecond();


 SYSTEMTIME SystemTime, SystemTime2; 
 GetSystemTime( &SystemTime);

 GetSystemTime( &SystemTime2);
 TRACE("JOG MINUS Time Value = %d \n", SystemTime2.wMilliseconds - SystemTime.wMilliseconds); 
//---------------------------------------------------------------------------------------//

/* 선언부 */
#define  PI  3.1415926535 
#include <math.h>
#define   RADIUS  150  

// 1. 영역구함

CRect rect;
GetClientRect(rect);

// 2. 이미지 중간점 구함

int  m_nCenterX       = rect.Width() / 2;  // Center X point 
int  m_nCenterY       = rect.Height()/ 2;  // Center Y point

// 3. 반지름

int  nHalf      = RADIUS; // 반지름

// 4. 계산할 각도 구함

int  m_nAngle = 0;
m_nAngle = 360 / m_nRingNum;  //  m_nRingNum <-- 점의 갯

// 5. 저장할 점 선언

CPoint  *pt;
for ( int i = 0; i < m_nRingNum ; i++)

{
    int nAxisX = 0;
    int nAxisY = 0;

    if( i == 0)
    {
        nAxisX      = (int)(    cos(360*(PI / 180)) * nHalf );          // X point
        nAxisY      = (int)(    sin(360*(PI / 180)) * nHalf );          // Y point
    }
    else

    {   
        nAxisX      = (int)(    cos((m_nAngle*i)*(PI / 180)) * nHalf    );      // X point
        nAxisY      = (int)(    sin((m_nAngle*i)*(PI / 180)) * nHalf    );      // Y point
    }
    // 6. 구한 점 저장

    pt[i].x = nAxisX;
    pt[i].y = nAxisY
}


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 다른프로그램 실행 -  /////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/


/*------인터넷사이트 실행------------------------------------------------------------*/
 WinExec("C:\\Program Files\\Internet Explorer\\IEXPLORE.EXE www.taeyang.com",SW_SHOW);

 WinExec("C:\\YeTools\\CpComSys\\CpPrc.exe",SW_SHOWMINIMIZED);

/*------응용프로그램 실행------------------------------------------------------------*/
 h. 헤더파일 선언 PROCESS_INFORMATION m_pi; //다른 프로그램 자동 실행및 종료를 위한
 

 STARTUPINFO StartupInfo = {0};
 StartupInfo.cb = sizeof(STARTUPINFO);
 PROCESS_INFORMATION ProcessInfo;
 
 StartupInfo.dwFlags = STARTF_USESHOWWINDOW; 
 StartupInfo.wShowWindow = SW_HIDE;//안보이기 SW_SHOWMINIMIZED-최소화
 
 if(!::CreateProcess(NULL, "C:\\YeTools\\CpComSys\\DLL\\CpPrc.exe", 
        //if(!::CreateProcess(NULL, "DataCPK.exe", 
 NULL, NULL, FALSE, 0, NULL, NULL, &StartupInfo, &ProcessInfo))
 {
 AfxMessageBox("C:\\YeTools\\CpComSys\\CpPrc.exe 실행 화일을 찾을 수 없습니다.");
 }
 m_pi = ProcessInfo;


 // 종료------Close------------------------
 HANDLE Killprocess;
 CString szKillProgramName;
 szKillProgramName = "C:\\YeTools\\CpComSys\\CpPrc.exe";//종료할 프로그램 위칭르 넣으 시요..
     Killprocess = OpenProcess(PROCESS_TERMINATE,0,m_pi.dwProcessId);
     TerminateProcess(Killprocess, (unsigned)-1);

C:\\Program Files\\Amfis1130\\SigmaTV.exe
/*
 CloseHandle(m_pi.hProcess);
 CloseHandle(m_pi.hThread);
 LPSTR    gAppName = "C:\\YeTools\\CpComSys\\CpPrc.exe";
 if (FindWindow(gAppName, NULL)) {
     PostQuitMessage(0);
 }
*/

/*------NOTE PAD 실행------------------------------------------------------------*/
 char csNote[128];
 strcpy(csNote,"c:\\Windows\\NOTEPAD ");
 strcat(csNote,filename);
 WinExec(csNote,SW_SHOW);


//------CString에 저장 후 메모장으로 보기------------------------------------------
m_csDisplay="";m_bShowDisplay=true;
NotePadDisplay();

void Status_display(CString sdisplay)
{
 if(m_bShowDisplay){m_csDisplay+=sdisplay+"\n";  if(m_csDisplay.GetLength()>=65550)m_csDisplay=""; }
}
void    NotePadDisplay(void)
{
 FILE *fp; CString Contents, datename, filename;
 filename="test.txt";
 if ((fp = fopen(filename,"w+")) == NULL) {
  AfxMessageBox("File Open Error.");  
  fclose(fp);
  return ;}

 Contents.Insert(Contents.GetLength(),m_csDisplay);
 fwrite(Contents,1,Contents.GetLength(),fp);
 fclose(fp);

 char csNote[128];
 strcpy(csNote,"c:\\Windows\\NOTEPAD ");
 strcat(csNote,filename);
 WinExec(csNote,SW_SHOW);

 strcpy(csNote,"c:\\WINNT\\NOTEPAD ");
 strcat(csNote,filename);
 WinExec(csNote,SW_SHOW);
}

/*------실행화일 디렉토리 구하기--- -------------------------------------------------------*/
//--------SetCurrentDirectory----------------------------------------------------------------
 if( mDAT.tot < 1 )       return;
 int  stat;
 char *str;
 CString  fname;
 DATE_INF day;
 str = new char[MAX_PATH+10];
 ::GetCurrentDirectory(MAX_PATH+1,str);
 uiGetSysDate(&day);
 fname.Format(_T("DOC\\%s%04d%02d%02d.TXT"),
 //-----------------------------------------------------------
 (char *)(LPCTSTR)mDAT.pid,day.yy%100,day.mo,day.dd);
 //-----------------------------------------------------------
 CFileDialog  dlg(FALSE,"DOC",fname,OFN_HIDEREADONLY,"프린트화일 (*.TXT)|*.TXT");
 stat = dlg.DoModal();
 ::SetCurrentDirectory(str);
 delete str;
 if( stat != IDOK )       return;
 fname = dlg.GetPathName();     ApSaveSeekDataInfor(fname,mDAT);


 char *str;
 CString  fname;
 str = new char[_MAX_PATH+1];
 ::GetCurrentDirectory(_MAX_PATH+1,str);

 AfxMessageBox((LPCTSTR)(char *)str);


//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 화 일 -  /////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////

//======================================================================================
/*------파일 다일로그-----------------------------------------------------------------*/
//======================================================================================

//==============화일 다일로그 PATH 지정 sprintf (CString으로 지정이 않되는 경우)=============

   CString csModelFile="C:\\AttachMachine\\Model\\MODEL1.txt";
   char szBuf[1024];sprintf(szBuf,csModelFile);


//===============화일 Load 다일로그==========================================================
void CAttachMachineView::OnClickFileLoadBtn() 
{
 // TODO: Add your control notification handler code here
        CFileDialog filedlg( TRUE,// TRUE : FileOpen, FALSE :FileClose
 _T("ini"),   // 디폴트 확장자 
 //_T("C:\\AttachMachine\\EquipSys\\*.*"),  // 디폴트 파일명 --마지막\\*.*
        _T("C:\\AttachMachine\\EquipSys\\Test.ini"),  // 디폴트 파일명 --현재 사용 파일을 제시
 OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,
 // OPENFILENAME
 // OFN_CREATEPROMPT
 //"텍스트 파일 (*.txt) | *.txt |데이타 파일 (*.dat; *.hex) | *.dat; *.hex|모든 파일 (*.*) | *.* ||",
 "File Load Data INI Files (*.ini)|*.ini||",
 // 필터 
 // 부모 윈도우
 NULL
 );

 if(filedlg.DoModal()==IDOK)
 {
  CString szFileDir=filedlg.GetPathName();  
  SEQ.csSpecFileName=szFileDir;
  FileData_DataSysGet(szFileDir,FILE_SPEC);
  Sub_SpecDataDisplay();
 }
}

//================새로운 이름으로 저장  =====================================================
void CAttachMachineView::OnClickFileNewSaveBtn() 
{
 // TODO: Add your control notification handler code here
 CString szFileName=""; CString csFileName="";
 CString szFileDir="";
 CString csTmp="";  CString csCh=""; CString csLoad="";
 //CFileDialog filedlg(FALSE,_T(""),_T(csTmp),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장 
 //CFileDialog filedlg(FALSE,_T(""),_T("C:\\AttachMachine\\Model\\*.*"),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장  
        CFileDialog filedlg(FALSE,_T(""),_T("C:\\AttachMachine\\Model\\Test.ini"),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장,현재 사용 파일을 제시
  
  "Save AS Data INI Files (*.ini)|*.ini||",NULL);//"files (*.*)",NULL);
 if (filedlg.DoModal()==IDOK)
 {
 szFileDir=filedlg.GetPathName();   //AfxMessageBox(szFileDir);//전체 화일+확장자까지
 if(Sub_SpecDataFileSave(szFileDir))
 {
  SEQ.csSpecFileName=szFileDir;
 }
 else
  AfxMessageBox("화일로 저장 하지 못했습니다.");
 }
}


/*------파일열기 다일로그------------------------------------------------------------*/
      void CFileDlgDlg::OnOpenFile() 
      {
 // TODO: Add your control notification handler code here
 CFileDialog dialog( TRUE,// TRUE : FileOpen, FALSE :FileClose
 _T("txt"),   // 디폴트 확장자 
 _T("C:\\Data\\*.*"),  // 디폴트 파일명 --마지막\\*.*
 OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,
 // OPENFILENAME
 // OFN_CREATEPROMPT
 "텍스트 파일 (*.txt) | *.txt |데이타 파일 (*.dat; *.hex) | *.dat; *.hex|모든 파일 (*.*) | *.* ||",
 // 필터 
 // 부모 윈도우
 NULL
 );

 dialog.DoModal();
     }

 //---------------------------------------------------------------
 CString InitialDir=Path_Image;// AfxMessageBox(Path_Model);
 InitialDir+="*.*";

 CString Title      = "SET IMAGE LOAD";
 //-------------------
 LPSTR File = InitialDir.GetBuffer(InitialDir.GetLength()*2);  //*char

 CFileDialog ImgDlg(TRUE,_T(Title),_T(InitialDir),OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,  
// CFileDialog ImgDlg(TRUE,_T(Title),File,OFN_ALLOWMULTISELECT | OFN_FILEMUSTEXIST| OFN_SHOWHELP,  
  "Image files (*.jpg)|*.jpg||",NULL);

 if (ImgDlg.DoModal()==IDOK)
 {
     //   tmModel.SetImage = ExtractFileName(ImgDlg->FileName);
     //   dpSname->CaptionFalse = tmModel.SetImage;
     }
 //---------------------------------------------------------------

      void CFileDlgDlg::OnSaveFile() 
      {
 // TODO: Add your control notification handler code here
        CFileDialog dialog( FALSE,// TRUE : FileOpen,// FALSE :FileClose
                _T("txt"),   // 디폴트 확장자
                    _T("C:\\Data\\Untitled.txt"), // 디폴트 파일명 
       OFN_OVERWRITEPROMPT | OFN_HIDEREADONLY,
    // OPENFILENAME
    // OFN_CREATEPROMPT
      "텍스트 파일 (*.txt) | *.txt |데이타 파일 (*.dat; *.hex) | *.dat; *.hex|모든 파일 (*.*) | *.* ||",
   // 필터 
   // 부모 윈도우
                    NULL
   );
 dialog.DoModal(); 
    }
 //===파일 읽기/저장 다일로그 ========================================================

 CString szFileName=""; CString csFileName="";
 CString szFileDir="";

 CString csTmp="";  CString csCh=""; CString csLoad="";

// CFileDialog filedlg(TRUE,_T(""),_T(csTmp),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//열기 
 CFileDialog filedlg(FALSE,_T(""),_T(csTmp),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,//저장  
  "Save AS Excel CSV Files (*.csv)|*.csv||",NULL);//"files (*.*)",NULL);

 if (filedlg.DoModal()==IDOK)
 {
 szFileDir=filedlg.GetPathName();   AfxMessageBox(szFileDir);//전체 화일+확장자까지
 szFileName=filedlg.GetFileTitle();    AfxMessageBox(szFileName);//입력 화일명만  
 szFileName=filedlg.GetFileName();      AfxMessageBox(szFileName);//입력 화일과 확장자 까지

 //화일명 뺀 화일 Dir 
 int index1=0; int index2=0; int nMode=0;
 index1=szFileDir.GetLength(); index2=szFileName.GetLength(); 
 csTmp=szFileDir.Mid(0,(index1-index2));


 
 szFileName=csTmp; AfxMessageBox(szFileName);
 //_mkdir(szFileName);
 }
  
 //===읽기========================================================
 //---------------------------------------------------------------
 csFileDir=filedlg.GetPathName(); //전체 디렉토리+화일명+확장자
 csFileName=filedlg.GetFileName();//화일명+확장자
 //---------------------------------------------------------------
 CString strFilter;
 strFilter.LoadString(AFX_IDS_PICTUREFILTER);

 CString strTitle;
 strTitle.LoadString(AFX_IDS_PICTUREBROWSETITLE);

 CFileDialog fdlg(TRUE, NULL, NULL,
   OFN_FILEMUSTEXIST |
   OFN_HIDEREADONLY |
   OFN_PATHMUSTEXIST,
   strFilter);

 fdlg.m_ofn.lpstrTitle = strTitle;

 int nResult = fdlg.DoModal();
 SetFocus();

 if (nResult != IDOK)
  return;

 CString strPath = fdlg.GetPathName();
 //---------------------------------------------------
 CString csFileName="";
 CString csFileDir=""; 
 CString csOpenDir; csOpenDir=CSProgramDir+CSFileSpecDataDir+CSDriveDataFileName+"\\";

 CFileDialog filedlg(TRUE,_T("*.INI"),_T(csOpenDir),OFN_HIDEREADONLY|OFN_OVERWRITEPROMPT,
  "INI files (*.ini)|*.ini||",NULL);

 if (filedlg.DoModal()==IDOK)
 {
  csFileDir=filedlg.GetPathName();
  CString csTmp;CString csBuf; CString csImage;
  if(csFileDir.GetLength()>0)
  {
  UpdateData(TRUE);
  CString csDriveName=csFileDir;
  CString filename = csDriveName;//+".ini";
  FileData_UpdateCommandData(filename);
  CommandDataUpdateDisplay();
  UpdateData(FALSE);
  }
 }

 //------------------------------------------------------------------
 CString szFileName;

 CFileDialog filedlg(TRUE,"bmp",NULL,OFN_FILEMUSTEXIST,
  "BMP files (*.bmp)|*.bmp||",NULL);
// if (freezeMode==FREEZE_BITMAP)
 {
  if (filedlg.DoModal()==IDOK)
  {
  szFileName=filedlg.GetPathName();
  szFileName=filedlg.GetFileName();
  }
 }
 
       //-----------------------------------------------------------
 int result;
 result=filedlg.DoModal();

 switch(result)
 {
 case IDOK:
  szFileName=filedlg.GetPathName();
   break;
 }
   return;

/=======================================================================================
//    화일 
//======================================================================================

//==============화일 GetPrivateProfileString==================================================
      char Retemp[256];
      char Lotemp[256];
      char Filetemp[2048];
      char Postemp[256];

     //상대 주소 -PLC
 GetPrivateProfileString("CONFIG","REMOTE_ADDR","192.168.001.1",Retemp,256,".\\config.ini");
 int iRePort = GetPrivateProfileInt("CONFIG","REMOTE_PORT",20000,".\\config.ini");
 //현재 주소 -PC
    GetPrivateProfileString("CONFIG","LOCAL_ADDR","192.168.001.200",Lotemp,256,".\\config.ini");
 int iLoPort = GetPrivateProfileInt("CONFIG","LOCAL_PORT",20001,".\\config.ini");

 // 작업모델 화일 Dir
    GetPrivateProfileString("FILE","FILENAME","DataSpec.ini",Filetemp,2048,".\\config.ini");

 CSFileSpecFileName=Filetemp;
 FileData_DataSysGet(CSFileSpecFileName,FILE_SPEC);

 // 카메라 X 위치 옵셋 
    GetPrivateProfileString("AXIS","CAM_POS_X","20",Postemp,256,".\\config.ini");
 m_fCamOffsetPos_X=(float)atof((LPCSTR)Postemp);

 // 카메라 Y 위치 옵셋 
    GetPrivateProfileString("AXIS","CAM_POS_Y","20",Postemp,256,".\\config.ini");
 m_fCamOffsetPos_Y=(float)atof((LPCSTR)Postemp);


//==============화일 WritePrivateProfileString==================================================
    char temp[256];
    char Filetemp[2048];

    memset(Filetemp, 0, 2048);
    lstrcat(Filetemp, SEQ.csSpecFileName);

    WritePrivateProfileString("FILE","FILENAME",Filetemp,CSProgramDir+"\\config.ini");

    GetDlgItemText(IDC_LISTEN_EDIT,temp,256);
    WritePrivateProfileString("CONFIG","LISTEN_PORT",temp,CSProgramDir+"\\config.ini");

//=======================================================================================
 FILE  *inn;
 int   i;
 CString  fstr = SysDir;
 fstr += "\\calibration.rsl";

 if( (inn= fopen(fstr,"r") ) != NULL )
 {
  for(i=0;i<7;i++)
   fscanf(inn,"%lf",&m_Calib.Val[i]);
  fclose(inn);
 }
 else
  AfxMessageBox("File could not be opened.",MB_OK,0);
  
//=======================================================================================
 FILE  *inn;
 CString  fstr = SysDir;
 fstr += "\\rotate.rsl";

 if( (inn= fopen(fstr,"w") ) != NULL )
 {
  fprintf( inn, "%lf %lf %lf %lf\n",m_Rotate.a,m_Rotate.b,m_Rotate.c,m_Rotate.d);
  fclose(inn); 
 }
 else
  AfxMessageBox("File could not be opened.",MB_OK,0);

//===============화일 복사===============================================================

 sFileName=strSelectedPath + "\\" + "Pcb.dat";
 tFileName=strBackUpPath + "\\" +"Pcb.dat";
 CopyFile(sFileName, tFileName , false);

//===============확장자 검색=============================================================

  fileName=fileDlg.GetPathName();
  CString ext=fileName.Right(4);

  if (!ext.CompareNoCase(".JPG"))
  {
  // AX_LoadJPG(fileName);
  // SetDlgItemText(IDC_FILEDIR_STATIC, fileName);
  }

  if (!ext.CompareNoCase(".BMP"))
  {
   LoadBMPToSet(fileName);
  // SetDlgItemText(IDC_FILEDIR_STATIC, fileName);
  }

//=======================================================================================

 FILE *fp;

 fp=fopen(fileName,"rb");
 if (fp==NULL) {
  CString msg;                    
  msg="Can't open file for reading :\n"+fileName;
  m_errorText=msg;
  return NULL;
 } 
 else
 {
  if (fread((void  *)(pixel),1,3,fp)==3) 
  { 
   *(outBuf+ADDr)=pixel[2];  // r
   *(outBuf+ADDg)=pixel[1];  // g
   *(outBuf+ADDb)=pixel[0]; 
  }
 }
 fclose(fp);

//=====================================================================================

 HFILE fi;

 CString Contents=csData; CString csfilename="";
// csfilename=CSFileTestDataDir+csFileName;
 csfilename =FileData_TestFileDirChk(csFileName, nMode, nCh);
 fi=_lopen(csfilename,OF_READWRITE);
 int len;
 len=_lwrite(fi,(LPCSTR)m_csTestFileData[nCh],strlen(m_csTestFileData[nCh]));
 _lclose(fi);

/*------파일 -------------------------------------------------------*/
 CString   csfilename=_T(""); CString   Contents=_T("");

 if(nCh>=CHMAX) return Contents;
// filename = CSFileTestDataDir+csFileName;
 csfilename =FileData_TestFileDirChk(csFileName, FILE_CSV, nCh);

 CFile file(csfilename,CFile::modeReadWrite|CFile::shareExclusive);
// CFile file("C:\\Polaronix\\Data\\Ch01.csv",CFile::modeReadWrite |CFile::shareExclusive);
 DWORD filesize=file.GetLength();
 char *buf=new char[filesize+1];

 file.Read(buf,filesize);
 file.Close();

 buf[filesize]=NULL;
 Contents=LPCSTR(buf);   delete buf;
 return Contents;

/*------파일 -------------------------------------------------------*/
 CString csData="";
 char* pFileName = "C:\\Polaronix\\Data\\Ch01.csv";
 CStdioFile file;
 if( !file.Open( pFileName,
  //  | CFile::modeWrite | CFile::typeText ) ) {
   CFile::modeRead | CFile::typeText ) ) {  
 }
 file.ReadString(csData);
 AfxMessageBox(csData);
 file.Close();
 
/*------파일 Open--------------------------------------------------*/
 csBmpFile=_T("Bin\\bmp3_96.bin");

 CFile *aFile;
 try
 {
  aFile=new CFile(csBmpFile,CFile::modeCreate | CFile::modeNoTruncate | CFile::modeReadWrite | CFile::shareDenyNone);
 }
 catch(CFileException *e)
 {
  e->Delete();
 }
 aFile->Abort(); //파일 닫기 실한 경우 예외 발생 않함 
// aFile->Close();
// delete aFile;



 CString csBmpFile;
 csBmpFile=_T("Bin\\bmp1_128.bin");

 CFile *aFile;
 try
 {
 // UINT readByte;
  aFile=new CFile(csBmpFile,CFile::modeNoTruncate|CFile::modeReadWrite|CFile::shareDenyNone);

  if(m_ZoomSize_X==96)
  {
  aFile->Write(temp2,12288);
  }
  else
  {
  aFile->Write(temp2,24576);
  }
 }
 catch(CFileException *e)
 {
  e->Delete();
 }

 aFile->Abort(); //파일 닫기 실패한 경우 예외 발생 않함 
// aFile->Close();
// delete aFile;


/*------파일 Open--------------------------------------------------*/

 HFILE fi;
 fi=_lopen("Bin\\bmp.bin",OF_READWRITE);

 int len;
 len=_lwrite(fi,(LPCSTR)temp1,strlen(temp1));

 _lclose(fi);


 FILE *fp;
 filename="Bin\\bmp.bin";

 if ((fp = fopen(filename,"w+")) == NULL) {
  AfxMessageBox("File Open Error.");  
  fclose(fp);
  return ;
 }
// Contents.Insert(Contents.GetLength(),
// Contents.Format(csBmp);
 fwrite(Contents,1,Contents.GetLength(),fp);
 fclose(fp);

/*------파일 Open--------------------------------------------------*/
#SETUP$
DF34257
CAS124T0
AS1234DF
SDFG4321
#ENDEQ$

void CSBottleView::FileDataUpdate(int nMode)
{
 CString csItemNameSelectFileName=_T("EquipSys\\ItemNameSelect.ini");

 __int16   length, exist;
 char   str[200];
 int index=0;
 int nCount=0;

 FILE   *fp ;
 CString   filename=_T("");
 CString   ReadData=_T("");
 CString   strTmp=_T("");
 BOOL   bFileCheck=false;
 BOOL   bFileCheck2=false;

 m_csModelItemName[1]=_T("");
 m_csModelItemName[2]=_T("");
 m_csModelItemName[3]=_T("");
 m_csModelItemName[4]=_T("");


 if(nMode==ITEMNAME)
 filename = csItemNameSelectFileName;
 else return;

 exist = access(filename,0);

 if (!exist && (fp = fopen(filename,"rt")) != NULL) {
  while (!feof(fp)) {
   ReadData.Empty();
   if ( fgets(str, 200, fp) != NULL) {   // error Return NULL
    ReadData.Format("%s", str);
    length = ReadData.GetLength();

    if(bFileCheck2==false)
    {
    index = ReadData.Find("#SETUP$");
    if(index>=0){bFileCheck=true; index=0; }
    else{AfxMessageBox("설정 데이타가 없습니다 !"); break;}
    }

    index = ReadData.Find("\t");
    if(index>=0)
    {
    ReadData.Format("%s", ReadData.Mid(0 , length-2));
    }
    else
    {
    ReadData.Format("%s", ReadData.Mid(0 , length-1));
    }
  
    if(ReadData=="#ENDEQ$"){break;}

    if(bFileCheck)
    {
     if(bFileCheck2)
     {
      if(nCount>=60){AfxMessageBox("저장된 데이타가 너무많습니다");break;}
      
      if(nCount==0)
      {m_csModelItemName[1]=ReadData;}
      else if(nCount==1)
      {m_csModelItemName[2]=ReadData;}
      else if(nCount==2)
      {m_csModelItemName[3]=ReadData;}
      else if(nCount==3)
      {m_csModelItemName[4]=ReadData;}
      nCount++;
     }
    }
       bFileCheck2=true;
   }
  }
 /// fclose(fp);

 } else {
  AfxMessageBox("설정데이타가 없습니다!  ItemNameSelect.data 화일이 없습니다."); return;//return 않하면 프로그램 에러
 }
 fclose(fp);

 UpdateData(FALSE);
}

/*------파일 Open--------------------------------------------------*/

 FILE *fpRobot;
 CString str;

 fpRobot = fopen("robot.txt", "rw+");
 fprintf(fpRobot, "%s", str);
 fclose( fpRobot );


/*------파일 생성 및 NotePad로 실행--------------------------------------------------*/
 FILE *fp;
 CString Contents, datename, filename;

 filename="test.txt";

 if ((fp = fopen(filename,"w+")) == NULL) {
  AfxMessageBox("File Open Error.");  
  fclose(fp);
  return ;
 }

 Contents.Format("\r\n=== FILE INFORMATION ===\r\n");
 Contents.Insert(Contents.GetLength(),"\r\nDATE & TIME\t");
 Contents.Insert(Contents.GetLength(),datename);

 Contents.Insert(Contents.GetLength(),"\r\nOPERATOR\t");

 Contents.Insert(Contents.GetLength(),"\r\n\r\nFile Name\t");
 Contents.Insert(Contents.GetLength(),filename);
 Contents.Insert(Contents.GetLength(),"\r\n\r\n");

 Contents.Insert(Contents.GetLength(),"=== ERROR LISTS ===\r\n\r\n");

 Contents.Insert(Contents.GetLength(),
  " ERR TIME\tCODE\tERROR MESSAGE                  \tOPERATORr\n\r\n");

 fwrite(Contents,1,Contents.GetLength(),fp);
 fclose(fp);

 char csNote[128];
 strcpy(csNote,"c:\\Windows\\NOTEPAD ");
 strcat(csNote,filename);
 WinExec(csNote,SW_SHOW);

/*----------------다른 폴더에서 파일copy 후 다른이름으로 저장 -------------*/  
 SHFILEOPSTRUCT sfo;
 memset(&sfo,0,sizeof(sfo));
 sfo.wFunc = FO_COPY;
 sfo.pFrom = _T("C:\\Aatool\\equip1.dat\0");
 sfo.pTo = _T("C:\\DATA\\suho.dat\0");
/* sfo.wFunc = FO_RENAME;
 sfo.pFrom = _T("C:\\DATA\\equip1.dat\0");
 sfo.pTo = _T("C:\\DATA\\ok.dat\0");
*/
 SHFileOperation(&sfo);


/*----------------여러 화일 삭제 -----------------------------------------------------------*/ 
 SHFILEOPSTRUCT sfo;
 memset(&sfo,0,sizeof(sfo));
 sfo.wFunc = FO_DELETE;
 sfo.fFlags =OFN_SHOWHELP; //메시지 창 뛰우지 않음
 sfo.pFrom = _T("Bmp\\*.*");
 SHFileOperation(&sfo);


/*------------------------------화일삭제--DeleteFile---------------------------------------*/

 UpdateData(TRUE);
   CCPKView* pView =( CCPKView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
 
 CCPKDoc *pDoc;
 pDoc=pView->GetDocument();

 int year,month;
 year=month=0;
 year=2001;
 month=5;

 if(AfxMessageBox(" ''Are You Sure ! DataBase delete ?'' ",MB_ICONQUESTION|MB_YESNO)==IDYES)
 {
   pDoc->DeleteDB(year,month);
  }
 else
  {
   return;
 }

void CCPKDoc::DeleteDB(int year, int month)
{
 CString csFile;
 
 csFile.Format("DATA\\CPK%4d%02d.mdb", year, month);
 DeleteFile((LPCTSTR)csFile);
 
 csFile.Format("DATA\\CPK%4d%02d.ldb", year, month);
 DeleteFile((LPCTSTR)csFile);
}
 
 SHFILEOPSTRUCT sfo;
 memset(&sfo,0,sizeof(sfo));
 sfo.wFunc = FO_DELETE;
 sfo.pFrom = _T("C:\\DATA\\200101.mdb\0");
 SHFileOperation(&sfo);

/*----------------------------------Windows 레지스트리에 저장-----------------------*/
void CPSRecorderView::INI_Get()
{
 char buff[1024];
 CString m_csTmpString;
 m_csTmpString = "NONE";
 GetPrivateProfileString("TIME", "TESTTIME1", m_csTmpString.operator const char * (), (LPTSTR)buff, 20, "SAET32.INI");
 m_fTestTime1= (float)atof((LPCSTR)buff);
}

void CPSRecorderView::INI_Write()
{
 CString m_csTmpString;
 m_csTmpString = "NONE";
 m_csTmpString.Format("%0.1f", m_fTestTime1);
 WritePrivateProfileString("TIME", "TESTTIME1", m_csTmpString.operator LPCTSTR(), "SAET32.INI");
}

/*----------------------------------BMP File저장-------------------------------------*/
void CCoilView::OnSaveimg() {
CFileDialog filedlg(FALSE,"bmp",NULL,OFN_OVERWRITEPROMPT,
 "BMP files (*.bmp)|*.bmp||",this);
 if (filedlg.DoModal()!=IDOK)
  return;
CColorBmpFile bmp;
 bmp.OpenWrite(filedlg.GetPathName(),640,480);
 for (int y=479; y>=0; y-=2) {
 BYTE rbuffer[640],gbuffer[640],bbuffer[640];
  Data->GetLine(y,rbuffer,gbuffer,bbuffer);
  bmp.WriteLineUpward(rbuffer,gbuffer,bbuffer);
  bmp.WriteLineUpward(rbuffer,gbuffer,bbuffer);
 }
 bmp.Close();
 m_strMessage = "저장되었습니다.";
 UpdateData(FALSE);
}


/*----------------------------------goto-------------------------------------*/
 goto fail;
 
 fail:
 MessageBox(NULL,"에러 입니다.","오류",MB_OK);
 return FALSE;


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 이미지 -  ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

#define WIDTHBYTES(bits) ((DWORD)(((bits)+31) & (~31)) / 8)
#define WIDTHBYTES(bits)    (((bits) + 31) / 32 * 4)


//======Center부터 검색 ======================================================================================
 //===CenterSearch===========================
 int x2=0, y2=0;
 int half_x=width/2; int half_y=height/2;
 float direct_y=-1; float direct_x=-1;
 int Cnt_y1=0;int Cnt_y2=0;
 int Cnt_x1=0;int Cnt_x2=0;
 //==========================================

 for(y=0; y<height-tHeight; y++) 
 {
  //=====CenterSearch===================================
  Cnt_y1++;
  if(Cnt_y1>=2){Cnt_y1=0;Cnt_y2++;}
  if(direct_y==1)direct_y=float(-1); else direct_y=1;
  y2=int( half_y + (Cnt_y2* direct_y) );
  Cnt_x1=0; Cnt_x2=0; direct_x=-1;
  //===================================================
  for(x=0; x<width-tWidth; x++) 
  {
   //=====CenterSearch================================
              Cnt_x1++;
   if(Cnt_x1>=2){Cnt_x1=0;Cnt_x2++;}
   if(direct_x==1)direct_x=float(-1); else direct_x=1;
   x2=int( half_x + (Cnt_x2* direct_x) );
   //=================================================

   pDC.SetPixel(x2+100,y2+100,RGB(255,0,0));

  }
 }
//==========================================================================================================
void ReadArrayToPointBit24(BYTE * OutImg, unsigned char BufImg[768][1024], UINT width, UINT height)
{
 CVisionSysView* pView =( CVisionSysView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
 CDC *pDC =pView->GetDC();
 //GrayImage =width*3;
 //Dispay Image= ((24*width)+31)/32*4), ((DWORD)(((bits)+31) & (~31)) / 8)
 //if(BufImg==NULL) return;
 int x,y; int y2=0;
 int nBit=0; nBit=24;

 int rwsize = WIDTHBYTES(nBit*width);

 int ADDr=0,ADDg=0,ADDb=0; 
  if(BufImg!=NULL)
  {
   for(y=0; y<nHeight; y++)
   {
    for(x=0; x<nWidth; x++)
    {
     y2=((height-1)-y);//-1 은 첫줄이 않나옴, y가 0일경우 문제
    // y2=y;//-1 은 첫줄이 않나옴, y가 0일경우 문제

     ADDr=(y2*rwsize)+(3*x)+2;
     ADDg=(y2*rwsize)+(3*x)+1;
     ADDb=(y2*rwsize)+(3*x)+0;

    // BufRevImg[ADDr]=BufImg[y][x];
    // BufRevImg[ADDg]=BufImg[y][x];
    // BufRevImg[ADDb]=BufImg[y][x];
     *(OutImg+ADDr)=BufImg[y][x];
     *(OutImg+ADDg)=BufImg[y][x];
     *(OutImg+ADDb)=BufImg[y][x];
    // pDC->SetPixel(x+400,y,RGB(BufImg[ADDr],BufImg[ADDg],BufImg[ADDb]));
    // pDC->SetPixel(x+400,y,RGB(BufImg[y][x],BufImg[y][x],BufImg[y][x]));
    }
   }
  }
}

//==========================================================================================================
void CVisionSysView::OnDraw(CDC* pDC) 
{
 // TODO: Add your specialized code here and/or call the base class
 CVisionSysDoc* pDoc = GetDocument();
 ASSERT_VALID(pDoc);
 CMainFrame *pFrame= (CMainFrame*)AfxGetMainWnd();
 ASSERT(pFrame);

/// return;
 int height=m_height;int width=m_width;  int Bit=m_Bit;
 int rwsize = WIDTHBYTES(Bit*width);
 BITMAPINFOHEADER bmiHeader;
 bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
 bmiHeader.biWidth = width;  bmiHeader.biHeight = height;
 bmiHeader.biPlanes = 1;   
 bmiHeader.biBitCount = Bit;
 bmiHeader.biCompression = BI_RGB;
 bmiHeader.biSizeImage = rwsize*height;//0;  
 bmiHeader.biXPelsPerMeter = 0;
 bmiHeader.biYPelsPerMeter = 0;bmiHeader.biClrUsed = 0;
 bmiHeader.biClrImportant = 0;// CRect rect;
 CRect rect;

 //=================================================================
 //--Open Gray Image--
 if(m_ColorGetImg!=NULL)//COLOR_IMAGE, SPOT_IMAGE, AUOT_IMAGE
 {
///  CPaintDC dcView(GetDlgItem(IDC_IMG_VIEW));
///  dcView.SetStretchBltMode(STRETCH_DELETESCANS);
///  GetDlgItem(IDC_IMG_VIEW)->GetClientRect(&rect);

//  StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom, 
///  StretchDIBits(dcView.m_hDC,rect.left,rect.top,width,height, 
//  StretchDIBits(pDC->GetSafeHdc(),20,20,width,height, 
//  0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
///  0, 0,width, height, m_GrayImg, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
  
//  SetDIBitsToDevice(pDC->GetSafeHdc(),0,0,width,height,
//      0,0,0,height,m_GrayImg,(LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS);
//  DibDraw(pDC,0,0,height,width,m_ColorGetImg,24);
  if(m_GrayImg!=NULL)DibDraw(pDC,0,0,height,width,m_GrayImg,Bit);
//  DibDrawReverse(pDC,0,0,height,width,m_GrayImg,24);
 }
 //=================================================================
 if(m_OutImg!=NULL)//이미지 가감 처리영상
 {
  int Add=640;
  DibDrawArrayToBit24(pDC,0+Add,0,height,width,m_OutImg,24);
 }
 //=================================================================
 // 마우스 드레그-템플레이트 정합을 위한 부분 
 if(m_flagMouse==TRUE)
 {
  //pDC->DrawEdge(&m_RectTrack,EDGE_ETCHED,BF_RECT); 
  DrawRect(pDC, m_RectTrack, RGB(0,0,255), 2);
 }
 if(pFrame->m_flagTemplate==TRUE) // template가 설정되어 있는 경우 
 {
  if(m_TempImg!=NULL)
  {
   DibDrawBit8(pDC,width+40,0,tHeight,tWidth,m_TempImg,24);
   rect.left=width+40; rect.top=0;
   rect.right=rect.left+tWidth;  rect.bottom=rect.top+tHeight;
   DrawRect(pDC, rect, RGB(255,0,0), 2);
  }
 } 
 //==================================================================
 //--이미지 검색 결과
 if(!(m_MatchPos.right==0 && m_MatchPos.bottom==0)) 
 {
  if(m_bImageSearch)
  {
  // pDC->DrawEdge(&m_MatchPos,EDGE_BUMP,BF_RECT);  
   DrawRect(pDC, m_MatchPos, RGB(255,0,0), 2);
   m_bImageSearch=FALSE;
  }
 }
 //==================================================================
 CClientDC pDC(this);

 int width=m_width;int height=m_height;
 if(m_ColorGetImg!=NULL)//COLOR_IMAGE, SPOT_IMAGE, AUOT_IMAGE
 {
//  CPaintDC dcView(GetDlgItem(IDC_IMG_VIEW));
//  dcView.SetStretchBltMode(STRETCH_DELETESCANS);
//  GetDlgItem(IDC_IMG_VIEW)->GetClientRect(&rect);
//  StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom, 
//  StretchDIBits(dcView.m_hDC,rect.left,rect.top,width,height, 
//  0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
  StretchDIBits(pDC.GetSafeHdc(),20,20,width,height, 
  0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
  
//  SetDIBitsToDevice(pDC->GetSafeHdc(),0,0,width,height,
//      0,0,0,height,m_ColorGetImg,(LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS);
 }

//---------BMP File Save------------------------------------------------------------------------ 
 //BMP File Save
 int ImageMaxNo=1;
 BITMAPINFOHEADER dibHi;
 BITMAPFILEHEADER dibHf;/// CClientDC pDC(this);
 int ADD1=0; int ADD2=0; int ADD3=0; 
 int x=0; int y=0; int y2=0;
 int WidthLineSize=WIDTHBYTES(24*width);
 int WidthLineSize2=WIDTHBYTES(8*width);
 unsigned char *BmpOutImg=NULL;
 BmpOutImg = new unsigned char [(height*ImageMaxNo)*(width*24)*3];

 BmpOutImg =buf;

 for(y=0; y<height*ImageMaxNo; y++) //BMP 화일로 저장 하기위해 거꾸로 저장
 {
  y2=((height*ImageMaxNo)-y);//-1 중요(최종 한줄 표현)
  for(x=0; x<width; x++)
  { 
   ADD1=(y2*WidthLineSize)+(3*x)+2;
   ADD2=(y2*WidthLineSize)+(3*x)+1;
   ADD3=(y2*WidthLineSize)+(3*x)+0;

   BmpOutImg[(y2*WidthLineSize)+(3*x)+2]=buf[(y*WidthLineSize)+(3*x)+2];
   BmpOutImg[(y2*WidthLineSize)+(3*x)+1]=buf[(y*WidthLineSize)+(3*x)+1];
   BmpOutImg[(y2*WidthLineSize)+(3*x)+0]=buf[(y*WidthLineSize)+(3*x)+0];
  // pDC->SetPixel(x+500,y,RGB(BmpOutImg[ADD1],BmpOutImg[ADD2],BmpOutImg[ADD3]));
  }
 }

 DWORD dwBitsSize = sizeof(BITMAPINFOHEADER)+sizeof(RGBQUAD)*256+WidthLineSize*height*sizeof(char); 
 
 dibHi.biSize=40;
 dibHi.biWidth=width;
 dibHi.biHeight=height*ImageMaxNo;
 dibHi.biPlanes=1;
 dibHi.biBitCount =24;
 dibHi.biCompression=BI_RGB;
 dibHi.biSizeImage = 3*WidthLineSize*(height*ImageMaxNo);
 dibHi.biXPelsPerMeter=0;
 dibHi.biYPelsPerMeter=0;
 dibHi.biClrUsed = dibHi.biClrImportant =0;
 
 dibHf.bfType=0x4D42; 
 dibHf.bfSize = dwBitsSize+sizeof(BITMAPFILEHEADER); // 전체파일 크기 
 if(dibHi.biBitCount==24) dibHf.bfSize -= sizeof(RGBQUAD)*256; // no pallette 
 dibHf.bfOffBits = dibHf.bfSize - WidthLineSize*height*sizeof(char); 
 dibHf.bfReserved1=dibHf.bfReserved2=0;

 FILE *outfile2;
 CString csFile; csFile.Format("C:\\Data\\D1_Project\\두오텍\\VisionSys\\bmp\\spec.bmp");
 outfile2 = fopen(csFile,"wb");

 fwrite(&dibHf,sizeof(char),sizeof(BITMAPFILEHEADER),outfile2);
 fwrite(&dibHi,sizeof(char),sizeof(BITMAPINFOHEADER),outfile2);
 fwrite(BmpOutImg,sizeof(char),3*WidthLineSize*dibHi.biHeight,outfile2);
// fwrite(buf,sizeof(char),3*WidthLineSize*dibHi.biHeight,outfile2);
 fclose(outfile2);
 if(BmpOutImg) delete []BmpOutImg;

//------------------------------------------------------------------------------------------------------------------------
void CNG::OnPaint() 
{
 CPaintDC pDC(this); // device context for painting
 
 // TODO: Add your message handler code here
 if (m_ColorImg==NULL) return;

 int height=m_height;int width=m_width; 
 int rwsize = WIDTHBYTES(24*width);

 BITMAPINFOHEADER bmiHeader;
 bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
 bmiHeader.biWidth = width;  bmiHeader.biHeight = height;
 bmiHeader.biPlanes = 1;    bmiHeader.biBitCount = 24;bmiHeader.biCompression = BI_RGB;
 bmiHeader.biSizeImage = rwsize*height;//0;  
 bmiHeader.biXPelsPerMeter = 0;
 bmiHeader.biYPelsPerMeter = 0;bmiHeader.biClrUsed = 0;
 bmiHeader.biClrImportant = 0;// CRect rect;
 
 CRect rect;

 if(m_ColorImg!=NULL)//COLOR_IMAGE, SPOT_IMAGE, AUOT_IMAGE
 {
  CPaintDC dcView(GetDlgItem(IDC_IMAGE1));
  dcView.SetStretchBltMode(STRETCH_DELETESCANS);
  GetDlgItem(IDC_IMAGE1)->GetClientRect(&rect);

  StretchDIBits(dcView.m_hDC,rect.left,rect.top,rect.right,rect.bottom, 
//  StretchDIBits(dcView.m_hDC,rect.left,rect.top,width,height, 
//  StretchDIBits(pDC->GetSafeHdc(),20,20,width,height, 
//  0, 0,width, height, m_ColorGetImg, (LPBITMAPINFO)&dibHi, DIB_RGB_COLORS, SRCCOPY);
  0, 0,width, height, m_ColorImg, (LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS, SRCCOPY);
  
//  SetDIBitsToDevice(pDC.GetSafeHdc(),0,0,width,height,
//      0,0,0,height,m_ColorGetImg,(LPBITMAPINFO)&bmiHeader, DIB_RGB_COLORS);
 }
 // Do not call CDialog::OnPaint() for painting messages
}

//-----------------------------------------------------------------------------------------------------------------------
void DibDraw(CDC *pDC, int px, int py, int height, int width, BYTE *BufImg, int Bit)
{
 int x,y; int y2=0;
 int nBit=0; nBit=Bit;
 int rwsize = WIDTHBYTES(nBit*width);//(((8*width)+31)/32*4);  // 4바이트의 배수여야 함
 BITMAPINFO *BmInfo; 
 BmInfo = (BITMAPINFO*)malloc(sizeof(BITMAPINFO)+256*sizeof(RGBQUAD));

 BmInfo->bmiHeader.biBitCount=nBit; 
 BmInfo->bmiHeader.biClrImportant=256;//0
 BmInfo->bmiHeader.biClrUsed=256;//0
 BmInfo->bmiHeader.biCompression=BI_RGB;//0

 BmInfo->bmiHeader.biHeight = height; 
 BmInfo->bmiHeader.biPlanes=1;
 BmInfo->bmiHeader.biSize=40;//=sizeof(BITMAPINFOHEADER);

 if(nBit==24)
 BmInfo->bmiHeader.biSizeImage=rwsize*height*3; 
 else
 BmInfo->bmiHeader.biSizeImage=rwsize*height;

 BmInfo->bmiHeader.biWidth =width; 
 BmInfo->bmiHeader.biXPelsPerMeter=0;
 BmInfo->bmiHeader.biYPelsPerMeter=0;

 for(x=0; x<256; x++) // Palette number is 256
 {
  BmInfo->bmiColors[x].rgbRed= BmInfo->bmiColors[x].rgbGreen = BmInfo->bmiColors[x].rgbBlue = x; 
  BmInfo->bmiColors[x].rgbReserved = 0;
 }

 if(nBit==24)
 {
  int ADDr=0,ADDg=0,ADDb=0; 
  int ADDr2=0,ADDg2=0,ADDb2=0; 
  unsigned char *BufRevImg = new unsigned char [(width*24)*height*3];
  /* 
  if(BufImg!=NULL)
  {
   for(y=0; y<height; y++)
   {
    for(x=0; x<width; x++)
    {
     y2=((height-1)-y);//-1 은 첫줄이 않나옴, y가 0일경우 문제
     ADDr=(y*rwsize)+(3*x)+2;
     ADDg=(y*rwsize)+(3*x)+1;
     ADDb=(y*rwsize)+(3*x)+0;

     ADDr2=(y2*rwsize)+(3*x)+2;
     ADDg2=(y2*rwsize)+(3*x)+1;
     ADDb2=(y2*rwsize)+(3*x)+0;

     BufRevImg[ADDr]=BufImg[ADDr2];
     BufRevImg[ADDg]=BufImg[ADDg2];
     BufRevImg[ADDb]=BufImg[ADDb2];
    // pDC->SetPixel(x+400,y,RGB(BufImg[ADDr],BufImg[ADDg],BufImg[ADDb]));
    }
   }
  }
 */
  int ImgSize=(width*24)*height*3;//int ImgSize=(width*8)*height;//8
  memcpy(BufRevImg,BufImg,ImgSize);
 // SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
 //     0,0,0,height,BufImg,(LPBITMAPINFO)&dibHi, DIB_RGB_COLORS);
 // SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
 //     0,0,0,height,BufImg,BmInfo, DIB_RGB_COLORS);
  SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
      0,0,0,height,BufRevImg,BmInfo, DIB_RGB_COLORS);
  delete []BufRevImg;
 }
 else
 {
  unsigned char *BufRevImg = new unsigned char [height*rwsize];
  int index1,index2=0;
  for(y=0; y<height; y++)
  {
   index1 = y*rwsize;
   index2 = (height-y-1)*width;
  // index2 = y*width;
   for(x=0; x<width; x++)
   {
    BufRevImg[index1+x]=BufImg[index2+x];
   // pDC->SetPixel(j,i,RGB(BufImg[index2+x],BufImg[index2+x],BufImg[index2+x]));
   }
  }

  SetDIBitsToDevice(pDC->GetSafeHdc(),px,py,width,height,
      0,0,0,height,BufRevImg,BmInfo, DIB_RGB_COLORS);
  delete []BufRevImg;
 }

}
//-----------------------------------------------------------------------------------------------------------------------
void CNG::AX_LoadJPG(CString fileName)
{
 UINT width=427; UINT height=601;
 
 if (m_ColorGetImg!=NULL) {delete [] m_ColorGetImg;m_ColorGetImg=NULL;}
 if (m_ColorImg!=NULL)  {delete [] m_ColorImg;m_ColorImg=NULL;}
 m_ColorImg = new unsigned char [(width*24)*height*3];

 // read to buffer tmp
 m_ColorGetImg=JpegFile::JpegFileToRGB(fileName, &width, &height);
 //CString csTmp; csTmp.Format("%d, %d",width, height); AfxMessageBox(csTmp);
 //-------------------------------------------------------
 if(m_ColorGetImg==NULL){return;}
 //-------------------------------------------------------
 JpegFile::BGRFromRGB(m_ColorGetImg, width, height);
 // vertical flip for display
 JpegFile::VertFlipBuf(m_ColorGetImg, width * 3, height);
 m_width=width; m_height=height;

 int y=0;
 int x=0;
 int ADD1,ADD2,ADD3;
 int SUM1,SUM2,SUM3;

 #define WIDTHBYTES2(bits)    (float((bits) / float(32)) * 4)

 float rwsize=WIDTHBYTES2(24*(width));//이미지 Size홀수 문제
 int   rwsize2=WIDTHBYTES(24*(width));

  for(y=0; y<int(height); y++)
  {
   for(x=0; x<int(width); x++)
   {
   ADD1=int((y*rwsize)+(3*x)+2);
   ADD2=int((y*rwsize)+(3*x)+1);
   ADD3=int((y*rwsize)+(3*x)+0);

   SUM1=int((y*rwsize2)+(3*x)+2);
   SUM2=int((y*rwsize2)+(3*x)+1);
   SUM3=int((y*rwsize2)+(3*x)+0);

   m_ColorImg[SUM1]=m_ColorGetImg[ADD1];
   m_ColorImg[SUM2]=m_ColorGetImg[ADD2];
   m_ColorImg[SUM3]=m_ColorGetImg[ADD3];
   
   //pDC.SetPixel(nX,nY,RGB(m_ColorImg[SUM1],m_ColorImg[SUM2],m_ColorImg[SUM3]));
   }

  }
}
//--------------------------------------------------------------------------------------------


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - POINT -  /////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

//======MEMCPY 생성=======================================================================

 unsigned char *OutImg = NULL;
// OutImg = new unsigned char [(nWidth*Bit)*nHeight*3];
 OutImg = (unsigned char*)calloc(nWidth*Bit*nHeight*3,sizeof(char));

 BYTE *outBuf=NULL;

 long bufsize = (long)w * 3 * (long)h;
 outBuf=(BYTE *) new BYTE [bufsize];

 outBuf=NULL;
 outBuf = new unsigned char [bufsize]; //dibHi.biSizeImage
// outBuf=(BYTE *) new BYTE [bufsize];


//======MEMCPY============================================================================

 int ImgSize=(width*24)*height*3;//24
// int ImgSize=(width*8)*height;//8

 memcpy(BufImg,BufImg2,ImgSize);

//======unsigned char,UINT * nWidth=======================================================

 UINT * nWidth,  UINT * nHeight
 BYTE * BufImg;
 BufImg=NULL;
 BufImg = new unsigned char [ImgSize]; //dibHi.biSizeImage

 *nHeight = NULL;
 *nWidth = NULL;

 *nHeight=height;
 *nWidth=width;


 CVisionSysView* pView =( CVisionSysView* )((CMainFrame*)AfxGetApp()->m_pMainWnd)->GetActiveView();
 CDC *pDC =pView->GetDC();
 //----------------------------------
 int rwsize = WIDTHBYTES(24*width);
 int ADDr,ADDg,ADDb;
 //----------------------------------
 int x=0; int y=0;
  for(y=0; y<height; y++)
  {
   for(x=0; x<width; x++) 
   {
    ADDr=(y*rwsize)+(3*x)+2;
    ADDg=(y*rwsize)+(3*x)+1;
    ADDb=(y*rwsize)+(3*x)+0;

    *(BufImg+ADDr)=BufImg2[ADDr];  // r
    *(BufImg+ADDg)=BufImg2[ADDg];  // g
    *(BufImg+ADDb)=BufImg2[ADDb];     // b

    pDC->SetPixel(x+400,y,RGB(BufImg[ADDr],BufImg[ADDg],BufImg[ADDb]));
    //pDC->SetPixel(col,row,RGB(pixel[2],pixel[1],pixel[0]));
   }
  }


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////// - 함 수  -  /////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

 int (*StepFunc_1[])(void) =
 {
  iCall_ChipTakeOff,  iCall_LaserMeasure,
  iCall_MarkRecMove,  iCall_AllMarkRec,  
  iCall_AllBadRec,  iCall_TargetMarkRec,  
  iCall_XYMovAbsorb1,  iCall_XYMovAbsorb2,
  iCall_NzlAbsorbOp1,  iCall_NzlAbsorbOp2,
  iCall_XYMountMov1,  iCall_XYMountMov2,  
  iCall_NzlMountOp1,      iCall_NzlMountOp2,
  iCall_AlignMoveXY1,     iCall_AlignMoveXY2,   
  iCall_InspectMoveXY1,   iCall_InspectMoveXY2,   
  iCall_AlignRecogOP1,    iCall_AlignRecogOP2,
  iCall_InspectRecogOP1,  iCall_InspectRecogOP2,
  iCall_NzlFocusReset1, iCall_NzlFocusReset2
 };


  if ((*StepFunc_1[index])() == NG)           // 실행 error이면
   TaskStatus1.iError = TaskStatus1.iNum;  // main분기 data
  else     // 실행성공이면
   TaskStatus1.iError = OK;

extern int  iCall_LaserMeasure(void);

/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
//////////////////////////////////////////// - 문 자  -  /////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

//8888888888888888888888888888888888888888888888888888888888888
//--------데이타 형 -----------------------------
short int, int   -2(15) ~ 2(15)-1     -32768~32767

long  int        -2(31) ~ 2(31)-1     -2147483648 ~ 2147483647

unsigned short int      0      ~2(15)-1      0 ~ 65535
unsigned int 

unsigned long int       0      ~2(32)-1      0 ~ 4294967295

float                          10(-79) ~ 10(75)

char                                         -128 ~ 127
unsigned  char                               0    ~ 255


//------------------------------------------------------
char  8
int   16
short 16
long   32
float  32
double  64
//-----------------------------------------------------
UINT-unsigned int
BYTE   -unsigned char
LPSTR  -char
(LPSTR) char*
LPTSTR   -unsigned short
LPCTSTR  -CString
//--------------------------
BOOL   A Boolean value.
BSTR   A 32-bit character pointer.
BYTE   An 8-bit integer that is not signed.
COLORREF   A 32-bit value used as a color value.
DWORD   A 32-bit unsigned integer or the address of a segment and its associated offset.
LONG   A 32-bit signed integer.
LPARAM   A 32-bit value passed as a parameter to a window procedure or callback function.
LPCSTR   A 32-bit pointer to a constant character string.
LPSTR   A 32-bit pointer to a character string.
LPCTSTR   A 32-bit pointer to a constant character string that is portable for Unicode and DBCS.
LPTSTR   A 32-bit pointer to a character string that is portable for Unicode and DBCS.
LPVOID   A 32-bit pointer to an unspecified type.
LRESULT   A 32-bit value returned from a window procedure or callback function
UINT   A 16-bit unsigned integer on Windows versions 3.0 and 3.1; a 32-bit unsigned integer on Win32.
WNDPROC   A 32-bit pointer to a window procedure.
WORD   A 16-bit unsigned integer.
WPARAM   A value passed as a parameter to a window procedure or callback function: 16 bits on Windows versions 3.0 and 3.1; 32 bits on Win32. 
Data types unique to the Microsoft Foundation Class Library include the following: 
POSITION   A value used to denote the position of an element in a collection; used by MFC collection classes.
LPCRECT   A 32-bit pointer to a constant (nonmodifiable) RECT structure.

//888888888888888888888888888888888888888888888888888888888888888888888888888

_CRTIMP int     __cdecl abs(int);
_CRTIMP double  __cdecl acos(double);
_CRTIMP double  __cdecl asin(double);
_CRTIMP double  __cdecl atan(double);
_CRTIMP double  __cdecl atan2(double, double);
_CRTIMP double  __cdecl cos(double);
_CRTIMP double  __cdecl cosh(double);
_CRTIMP double  __cdecl exp(double);
_CRTIMP double  __cdecl fabs(double);
_CRTIMP double  __cdecl fmod(double, double);
_CRTIMP long    __cdecl labs(long);
_CRTIMP double  __cdecl log(double);
_CRTIMP double  __cdecl log10(double);
_CRTIMP double  __cdecl pow(double, double);
_CRTIMP double  __cdecl sin(double);
_CRTIMP double  __cdecl sinh(double);
_CRTIMP double  __cdecl tan(double);
_CRTIMP double  __cdecl tanh(double);
_CRTIMP double  __cdecl sqrt(double);

  double hypot(double x,double y);직삼각형의 사변 길이
  double sqrt(double x);x의 제곱근
  double pow(double x,double y);xy. x의 y승 
  double log(double x);자연 대수
  double log10(double x);상용 대수
  double exp(double x);자연 대수 exp

//=============================================================
/*---------------------- 형 변형 ----------------------------*/
//=============================================================

//---------------
double     "%.1e"
long int   "%ld"
//---------------

/*---------------------- Char 문자로 변경----------------------------*/
        DWORD dData
        char       Data[33] = "\0";
        ultoa(dData, Data, 10);
        CString    sRtn = Data;

        CString csText;
        char buff[40];
        csText=((LPCSTR)buff);


 //---메모리할당 삭제----------------------------------
 CString str;
 char *cstr=NULL;str = new char[_MAX_PATH+1];
 ::GetCurrentDirectory(_MAX_PATH+1,cstr);
 str=(LPCTSTR)(char *)cstr;
 if(cstr)delete[] cstr;
 return str;
 //-----------------------------------------------------

 char *str;
 CString Path_App =(LPCTSTR)(char *)str;
 //-----------------------------------------------------------
 (char *)(LPCTSTR)mDAT.pid,day.yy%100,day.mo,day.dd);
 //-----------------------------------------------------------


        //-----------------------------------
 (LPCTSTR)(char *)
        //-----------------------------------

/*---------------------- lstrcpy----------------------------*/
 CString m_strSend;
 BYTE temp[2000];
 lstrcpy((LPSTR)temp,(LPSTR)m_strSend.operator const char*());

/*---------------------- sprintf----------------------------*/

 char buff[100];
 int nData=100;
 sprintf(buff, "%d", nData);

/*---------------------- int--------------------------------*/
 int a=111;
 sprintf(temp,"%d",a);

 char buff[40];
 int nData;
 nData=(int)atoi((LPCSTR)buff);

 ///////////////////////////////
 short number;
 CString str;
 char buffer[20];
 if (number > 0) {
  _itoa(number,buffer,10);
  str += buffer;
 }
 str += "\r"; //CR

/*-------------------문자-> float 변경------------------------*/

 CString csTmp;
 float fHum;
 fHum = (float)atof((LPCSTR)csTmp);

*-------------------float-> 문자 변경------------------------*/
        float fData=(float) 12.345;
        CString csText;
        csText.Format("%.3f",fData);


/*-------------------문자-> long 변경------------------------------*/
 long lngBuf = ::atol(strBuf);

/*------------------- long-> 문자 변경-----------------------------*/
        long lData=1123;
 CString csTmp; csTmp.Format("%ld",lData);


*-------------------double-> 문자 변경------------------------------*/
         CString csText;
         double dData;
         csText.Format("%-13.2f",dData);

/*--------------------일정문자 삭제--------------------------------*/
 CString csRead;
  csRead.Delete(5,1);
       위치,갯수 
/*------------------일정문자 추출-----------------------------------*/
 CString InString;
 CString csTemp = InString.Mid(index+1,6);
       위치 , 크기

/*------------float 반올림------------------------------------------*/
 #define Cut(A)          (float)((long int) (((A)+.05) * 10))/10;

 float Test1=(float)2.374826;
 float Test2;
 Test2=Cut(Test1);
 csTest.Format("%.6f",Test2);
 m_nisFM1LCoolRpmDecision.SetOffText(csTest);

/*------HEX and 비교구문-------------------------------------------*/
 int test1=0;
 test1 |=0x4000;
 test1 |=0x02;

 if (test1 & 0x4000)
 {
  if ((test1 & 2)==0)
  {
  AfxMessageBox("!0x02");
  }
  else
  {
  AfxMessageBox("0x02");
  }
 }
 else
 {
  AfxMessageBox("!0x4000");
 }
/*------------상위 4비트만  추출 -----------------------------------*/
 BYTE m_nInHorseTmp;
 BYTE Intemp;
 m_nInHorseTmp=0X7f;
// m_nInHorseTmp |= 0X0f;
 m_nInHorseTmp &= 0Xf0;
 Intemp=m_nInHorseTmp/16;

 m_TEST.Format("%d",Intemp);

 UpdateData(FALSE);

/*------------------------핵사값-> 십진수-------------------------*/
 int no;
 CString n,m_NoData ;
 char buf[4]; buf[0]='0';buf[1]='A';buf[2]='2';buf[3]='B';
 char data[4];
 for(int s=0; s<4; s++)
 {
 data[s] = buf[i];
 }
 no=AscHextoAscDec(data);
 n.Format("%d",no);
 m_NoData = n;
/*-----------------------AscHextoAscDec----------------------------*/
int CFileTestView::AscHextoAscDec(char hexnum[])
{
/* int dec;
 dec = (int)hex-48;
 if(dec>9)
 dec=dec-7;
 return dec;
*/
 int i=0;
 int Num[4],Sum;

 for(i=0; i<4; i++)
 {
  if(hexnum[i]>0x40)
   Num[i]=hexnum[i]-'A'+10;
  else
   Num[i]=hexnum[i]-'0';
 }
 Sum=Num[0]*16*16*16 + Num[1]*16*16 + Num[2]*16 + Num[3];

 return Sum;
}
/*---------------------- 십진수-> 핵사------------------*/
 int NUM;
 CString m_NoData;
 NUM=162;  ///핵사값=A2
 BYTE temp[3];
 temp[0] = HextoAsc(NUM/16);
 temp[1] = HextoAsc(NUM%16);
 temp[2] = '\0';
 m_NoData=temp;
/*-----------------------HextoAsc-----------------------*/
BYTE CFileTestView::HextoAsc(BYTE hexnum)
{
 unsigned char hex[] = { "0123456789ABCDEF" };
 unsigned char ascnum;
 ascnum = hex[hexnum%16]; 
 return ascnum; 
}
/*-----------------ASC-> 정수변환-----------------------*/ 
 int NanBangData;
  TCHAR  NanBang[5];
  NanBang[0] = pDoc->m_RsrBuf[9];
  NanBang[1] = pDoc->m_RsrBuf[10];
  NanBang[2] = pDoc->m_RsrBuf[11];
  NanBang[3] = pDoc->m_RsrBuf[12];
  NanBang[4] = '\0';
  NanBangData  = atoi(NanBang);
/*--------------------Format----------------------------*/

 int NO[4];
 CString n;
 NO=0x31;
 n.Format("%d%d%d%d",NO[0],NO[0],NO[0],NO[0]);
 no=atoi(n);
 m_NoData = n;
 if(no==2100){m_NoData="aa";}
 else{m_NoData ="bb";}
/*--------------------- strcat---------------------------*/
 char string[80];
 char temp2[20];
    strcpy( string, "Hello world from " );
    strcat( string, "1 " );
    strcat( string, "2 " );
    strcat( string, "!" );

 sprintf(temp2,"%s\n",string);
 AfxMessageBox(temp2);

/*-----------------strok----------------------------------*/

 char seps[] = ","; char *token; char string[250];
    ///*** Establish string and get the first token: 
 strcpy( string, ReadData); token = strtok(string, seps );

 char string[] = " 1 2 \n3,4,,,,,,end";
 char s

eps[]   = " ,\t\n";
 //char seps[]   = ",";
 char *token;

    ////////*** Establish string and get the first token: 
    token = strtok( string, seps );
    char temp2[20];
    while( token != NULL )
    {
       //////*** While there are tokens in "string" 
  sprintf(temp2,"%s",token);
  AfxMessageBox(temp2);
       ///////*** Get next token: 
       token = strtok( NULL, seps );
    }


 //----------------------------------------------------
  char *data;
  char szBuf[1024];

  CString InString="OK11,123,250,125";
  sprintf(szBuf,InString);
 
  data = strtok(szBuf,",");
  AfxMessageBox(data);
  
  data = strtok(NULL,",");
  AfxMessageBox(data);

  data = strtok(NULL,",");
  AfxMessageBox(data);

  data = strtok(NULL,",");
  AfxMessageBox(data);
//------------------------------------------

 char string[] = "IMAGE1,IMAGE2,IMAGE3,IMAGE11,IMAGE4,IMAGE20";
 //char seps[]   = " ,\t\n";
 char seps[]   = ",";
 char *token;

    ////////*** Establish string and get the first token: 
    token = strtok( string, seps );
    char temp2[20];
    while( token != NULL )
    {
       //////*** While there are tokens in "string" 
  sprintf(temp2,"%s",token);
  AfxMessageBox(temp2);
       ///////*** Get next token: 
       token = strtok( NULL, seps );
    }
/*--------------------strlen--------------------------------*/
    char temp2[20];
    char buffer[61] = "How";
    int  len;
    len = strlen( buffer );
   // sprintf(temp2,"%d",len);
    sprintf(temp2,"%s",buffer);
    AfxMessageBox(temp2); 
/*---------------------- int--------------------------------*/
 int a=111;
 sprintf(temp,"%d",a);

/*------------문자 위치(길이) 결과 얻어내기------------------------------------*/

 InString="12345678+000 END";
 index = InString.Find("END");//END의 위치 값 0 ~ END 정수 값

 csText.Format("%d",index);
 AfxMessageBox(csText);

 index = InString.Find("+");
 m_csTmpString=InString.Left(index+2);//index 위치+2 까지 문자 얻음
 AfxMessageBox(m_csTmpString);


/*-----------지정 위치 문자 얻어 내기 --String.GetAt(n)--------------------------------------*/

  int Length2 =  NamBangDataBuf.GetLength();
   for(int n = 0; n < Length2; n++)
   {
   buf2[n] = NamBangDataBuf.GetAt(n);
   }
   buf2[n] = '\0';

  n 위치의 문자를 얻어냄
/*--------------------------------------------------------------
 index = InString.Find("+");//15
 while(index>=0)
 {
  m_csTmpString=InString.Left(index+2);//"+"위치 + 2 위치 문자얻음  "," 까지
  InString =InString.Right(InString.GetLength()-index-2); //전체에서 LEFT뺀 나머지 문자
  OneChar = m_csTmpString.GetAt(0);  //0  
  index = m_csTmpString.Find("N"); //4

  WAV[0] = m_csTmpString.GetAt(index-4); //V
  WAV[1]=NULL;
//  csText.Format("%d",nI);
//  AfxMessageBox(csText);
  OneChar = m_csTmpString.GetAt(index-1); //3번 위치의 "1" 얻음
  tmp[0]=OneChar; 
  tmp[1]=NULL; //temp= "1";
  nI=atoi(tmp);

/*--------------------------대문자로 바꿈--------------------------------*/
 CString Buf1;
 Buf1="abcdef";
 Buf1.MakeUpper();

 AfxMessageBox(Buf1);
/*-------------------------일부 문자 뽑아 내기--------------------------*/
 CString csTmp,InString;

 InString="#SNDATAok-aa#END";

 csTmp=FindData(InString, "#SN",'#');

 AfxMessageBox(csTmp);

 결과=DATAok-aa


CString CSECSystemView::FindData(CString csData, CString csFind, TCHAR OneChar)
{
 int length,index,index2;
 CString csTmp,csTmpData;

 index = csData.Find(csFind);//MODEL_INFO
 length = csFind.GetLength();

 csTmpData=csData.Right(csData.GetLength() - index - 1);
 index2 = csTmpData.Find(OneChar);//MODEL_INFO
 csTmp = csData.Mid(length+index,index2+1-length);
// csData.Format("index=%d",index2);
 if((index < 0)||(index2 < 0)) return _T("");
 else return csTmp;
}
/*------------------------핵사값-> 십진수-------------------------*/
 int no;
 CString n,m_NoData ;
 char buf[4]; buf[0]='0';buf[1]='A';buf[2]='2';buf[3]='B';
 char data[4];
 for(int s=0; s<4; s++)
 {
 data[s] = buf[i];
 }
 no=AscHextoAscDec(data);
 n.Format("%d",no);
 m_NoData = n;

//-------------------------------------------------------------------//
BYTE CHexAscChangeView::AsctoHex(BYTE ascnum)
{
 unsigned char hex[] = { "0123456789ABCDEF" };
 unsigned char i=0;

 do
 {
  if(hex[i] == ascnum)
  {
   return i;
  }
 i++;
 }while(i<16);
 return 0;
}

/*-----------------------AscHextoAscDec----------------------------*/
int CFileTestView::AscHextoAscDec(char hexnum[])
{
/* int dec;
 dec = (int)hex-48;
 if(dec>9)
 dec=dec-7;
 return dec;
*/
 int i=0;
 int Num[4],Sum;

 for(i=0; i<4; i++)
 {
  if(hexnum[i]>0x40)
   Num[i]=hexnum[i]-'A'+10;
  else
   Num[i]=hexnum[i]-'0';
 }
 Sum=Num[0]*16*16*16 + Num[1]*16*16 + Num[2]*16 + Num[3];

 return Sum;
}
/*---------------------- 십진수-> 핵사-------------------*/
 int NUM;
 CString m_NoData;
 NUM=162;  ///핵사값=A2
 BYTE temp[3];
 temp[0] = HextoAsc(NUM/16);
 temp[1] = HextoAsc(NUM%16);
 temp[2] = '\0';
 m_NoData=temp;
/*-----------------------HextoAsc-----------------------*/
BYTE CFileTestView::HextoAsc(BYTE hexnum)
{
 unsigned char hex[] = { "0123456789ABCDEF" };
 unsigned char ascnum;
 ascnum = hex[hexnum%16]; 
 return ascnum; 
}
/*-----------------ASC-> 정수변환-----------------------*/ 
 int NanBangData;
  TCHAR  NanBang[5];
  NanBang[0] = pDoc->m_RsrBuf[9];
  NanBang[1] = pDoc->m_RsrBuf[10];
  NanBang[2] = pDoc->m_RsrBuf[11];
  NanBang[3] = pDoc->m_RsrBuf[12];
  NanBang[4] = '\0';
  NanBangData  = atoi(NanBang);
/*--------------------Format----------------------------*/

 int NO[4];
 CString n;
 NO=0x31;
 n.Format("%d%d%d%d",NO[0],NO[0],NO[0],NO[0]);
 no=atoi(n);
 m_NoData = n;
 if(no==2100){m_NoData="aa";}
 else{m_NoData ="bb";}
/*--------------------- strcat---------------------------*/
 char string[80];
 char temp2[20];
    strcpy( string, "Hello world from " );
    strcat( string, "1 " );
    strcat( string, "2 " );
    strcat( string, "!" );

 sprintf(temp2,"%s\n",string);
 AfxMessageBox(temp2);

/*-----------------strok----------------------------------*/
 char string[] = " 1 2 \n3,4,,,,,,end";
 char seps[]   = " ,\t\n";
 //char seps[]   = ",";
 char *token;

   ////////*** Establish string and get the first token: 
   token = strtok( string, seps );
   char temp2[20];
   while( token != NULL )
   {
      //////*** While there are tokens in "string" 
  sprintf(temp2,"%s",token);
  AfxMessageBox(temp2);
      ///////*** Get next token: 
      token = strtok( NULL, seps );
   }
/*--------------------strlen--------------------------------*/
   char temp2[20];
   char buffer[61] = "How";
   int  len;
   len = strlen( buffer );
  // sprintf(temp2,"%d",len);
   sprintf(temp2,"%s",buffer);
   AfxMessageBox(temp2);

Measure_r= hypot(fPoint_x,fPoint_y);
Measure_r=sqrt(fPoint_x*fPoint_x+fPoint_y*fPoint_y);

//---CString To Byte (unsigned char)------------------------------------------
 BYTE  c_str(CString str, int n) 
 {
  BYTE cDt;
  int nSize=0;
  nSize=str.GetLength();
  if(nSize>=n)
  {
     cDt= str.GetAt(n);
  }
  return cDt;
 }

//------------------------------------------------------------------------------
 CString str;
 BYTE temp;
 for(int i=0; i<6; i++)
 {
  str.Format("%d : ",i);
  if(c_str(name,i)=='3')
  AfxMessageBox(str+"ok");
  else
  AfxMessageBox(str);
 }
//------------------------------------------------------------------------------ 
 //char 문자변형 !!!!!!!!!!!!!!!!!!!!
 BYTE temp[2];
 
 temp[0]=(c_str(name,i);
 temp[1]='\0';
 
 str=(LPSTR)temp;
 AfxMessageBox(str);
 
/*---------------------------------------------------------*/
/*----------------------HEX 8BIT  문자표현----------------------------------------*/

CString CSECKLineDVM2View::Hext8BitAsctoChange(int CheckSum)
{
 CString csHiBit,csLowBit,csResult;
 char HiBit;
 char LowBit;

 HiBit=(CheckSum & 0xf0)/16;
 LowBit=CheckSum & 0x0f;

 csHiBit=HextoAsc(HiBit);
 csLowBit=HextoAsc(LowBit);
 
 csResult=csHiBit+csLowBit;
 return csResult;
}

BYTE CModuleAgingView::HextoAsc(BYTE hexnum)
{
 unsigned char hex[] = { "0123456789ABCDEF" };
 unsigned char ascnum;
 
 int nBuf=0;

 nBuf=hexnum%16;
 if((nBuf>=0)&&(nBuf<=15))
 {
  ascnum = hex[hexnum%16]; 
 }
 else
 {
  ascnum =0;
 }
 return ascnum; 
}
/*----------------------HEX 분할 표현----------------------------------------*/

 long  dAddress=4294967295;  //FF FF FF FF

 NAddress[3]=long((lAddress&0xff000000)>>24);
 NAddress[2]=long((lAddress&0x00ff0000)>>16);
 NAddress[1]=long((lAddress&0x0000ff00)>>8);
 NAddress[0]=long(lAddress&0x000000ff);

 unsigned char Command[]={NAddress[3],NAddress[2],NAddress[1],NAddress[0]}; //81-Command,   00 08- Data Size 8Byte
 pFrame->m_serial[PORT_MODULE_A-1].Write(Command,4);
/*----------------------HEX 232전송----------------------------------------*/

 unsigned char *BinOutImg;
 BinOutImg = NULL;     //변경전 Image file size
 BinOutImg   = new unsigned char [3*WidthLineSize*(PaletteSize_y*ImageMaxNo)];

 Data[0]=int(BinOutImg[index+0]);
 unsigned char Buf1[]={Data[0]};
 pFrame->m_serial[port-1].Write(Buf1,1);

 Data[1]=int(BinOutImg[index+1]);
 unsigned char Buf2[]={Data[1]};
 pFrame->m_serial[port-1].Write(Buf2,1);


/*----------------------String Table 얻기----------------------------------------*/
CString strTemp;
if (strTemp.LoadString(IDS_SERVERRESET))

/*----------------------한글 폰트 얻기 / 출력------------------------------------*/

const char KoreanFont_MOUM_A1[14][3] = { 
 "각","간","갇","갈","감","갑","갓","강","갖","갗",
 "갘","같","갚","갛",
};
 CString csData;

 BYTE temp[3];
 temp[0] = KoreanFont_MOUM_A1[1][0];
 temp[1] = KoreanFont_MOUM_A1[1][1];
 temp[2] = '\0';

 csData=temp;
 AfxMessageBox(csData);

/*----------------------사이즈가 수시변동  끝 네자리 얻기------------------------*/

 CString strTmp=_T("");
 CString strTmp2=_T("");
 CString csData="EX-4A21";
 int nLotSize=0;

 strTmp=csData;
 
 if(strTmp.GetLength()>0)
 {
  nLotSize=strTmp.GetLength();

  if(nLotSize>=4)
  {
   for(int i=nLotSize-4; i<nLotSize; i++)
   {
   strTmp2+=strTmp.Mid(i,1);
   }
  }
 }

 if(strTmp2.GetLength()==4)
 {
 AfxMessageBox(strTmp2);
 }
/*---------------------- Delete------------------------*/
 CString csRead;
 int nNo;
 csRead.Delete(nNo,1);
//=============================================================
//=============================================================


//====입력 문자중  숫자만 체크=================================
bool AsctoHexChk(CString csNo)
{
 if(csNo=="")return false;
 int Length =  csNo.GetLength();
 if(Length<=0)return false;
 BYTE No;  
 bool chk=true;
 
 for(int i=0; i<Length; i++)
 {
  No=csNo.GetAt(i);
  if(!AsctoHex(No))chk=false;
 }
   return chk;
}

bool AsctoHex(BYTE ascnum)
{
 unsigned char hex[] = { "0123456789." };
 unsigned char i=0;
 bool Chk=false;
 do
 {
  if(hex[i] == ascnum)
  {
   Chk=true; break;
  }
  i++;
 }while(i<11);
 return Chk;
}

//====한정 문자 메세지 ==========================================
 const char BOARD1[MAX_BD][10]= { 
 "DZ1","DX1","DY1","DZ2","DX2","DY2","FX1","FY1",};
 CLabelControl *pLabel;
 for(int i=0; i<MAX_BD; i++)
 {
   pLabel = (CLabelControl *)GetDlgItem(IDC_LBL_AXIS_X+i);
   pLabel->SetWindowText(LPTSTR(BOARD1[i]));
 }
 
//====리스트 사용하기============================================
typedef struct {
 CString MarkID;
 int MarkNo;
 int Registered;
 int iLight[3];
} MARKDATA_RECORD;

CList<MARKDATA_RECORD, MARKDATA_RECORD&> m_list;
void CMarkData::Load()
{
 Clear();

 MARKDATA_RECORD rec;
 CString strSection;
 CIniFile iniFile("C:\\MountData\\MarkData\\Mark.lib");
 int count = iniFile.ReadInt("Mark Library", "Count");
 for (int i=1; i<=count; i++) {
  strSection.Format("Mark #%02d", i);
  rec.MarkID = iniFile.ReadString(strSection, "Mark ID");
  
  m_list.AddTail(rec);
 }
}
void CMarkData::Save()
{
 MARKDATA_RECORD rec;
 POSITION pos;
 CString strSection;
 int count = GetCount();
 CIniFile iniFile("C:\\MountData\\MarkData\\Mark.lib");
 iniFile.WriteInt("Mark Library", "Count", count);
 for (int i=0; i<count; i++) {
  pos = m_list.FindIndex(i);
  rec = m_list.GetAt(pos);
  iniFile.WriteDouble(strSection, "OuterDiameter", rec.OuterDiameter);
 }
}
void CMarkData::Clear()
{
 m_list.RemoveAll();
}
MARKDATA_RECORD CMarkData::GetData(int index)
{
 ASSERT(index > 0 && index <= m_list.GetCount());
 POSITION pos = m_list.FindIndex(index-1);
 MARKDATA_RECORD rec = m_list.GetAt(pos);
 return rec;
}
bool CMarkData::InsertBlankData(int index)
{
 ASSERT(index > 0 && index <= m_list.GetCount()+1);
 MARKDATA_RECORD rec;
 rec.MarkID.Empty();
 rec.MarkNo = 0;
 rec.Registered = 0;
 rec.iLight[0] = 1;
 rec.iLight[1] = 1;
 rec.iLight[2] = 1;
 if (index > m_list.GetCount()) {
  m_list.AddTail(rec);
 }
 else {
  POSITION pos = m_list.FindIndex(index-1);
  m_list.InsertBefore(pos, rec);
 }
 return true;
}

//___________________________________________________________________________

void CMarkData::DeleteData(int index)
{
 if (index < 0 || index > m_list.GetCount()) return;
 POSITION pos = m_list.FindIndex(index-1);
 m_list.RemoveAt(pos);
}
//===========================================================================
//===========================================================================

void CMarkData::SetData(int index, MARKDATA_RECORD rec)
{
 ASSERT(index > 0 && index <= m_list.GetCount());
 POSITION pos = m_list.FindIndex(index-1);
 m_list.SetAt(pos, rec);
}

//====struct=================================================================

//typedef struct tagBLOBDATA { short ltx, lty, rbx, rby; int n, pc; float cx, cy, r, g, b, u02, u20, u11, m, v; } BLOBDATA;

//---------------------------------------------------------------------------
//====Point Reutn============================================================
//%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

BYTE * BMPFile::LoadBMP(CString fileName,UINT *width, UINT *height)
{
 BYTE *outBuf=NULL;
 long bufsize = (long)w * 3 * (long)h;
 outBuf=(BYTE *) new BYTE [bufsize];


 for (int col=0;col<w;col++)
 {
  long offset = col * 3;
  char pixel[3];
  if (fread((void  *)(pixel),1,3,fp)==3) 
  {
  // we swap red and blue here
  *(outBuf + rowOffset + offset + 0)=pixel[2];  // r
  *(outBuf + rowOffset + offset + 1)=pixel[1];  // g
  *(outBuf + rowOffset + offset + 2)=pixel[0];  // b
  }
 }

 int w; 
 int h;
 *width=w;
 *height=h;
 return outBuf;
}

//===========================================================================
BYTE * BMPFile::LoadBMP(CString fileName, 
      UINT *width, 
      UINT *height)
{
    BITMAP inBM;

    BYTE m1,m2;
    long filesize;
    short res1,res2;
    long pixoff;
    long bmisize;                    
    long compression;
    unsigned long sizeimage;
    long xscale, yscale;
    long colors;
    long impcol;
   

 BYTE *outBuf=NULL;
 
 // for safety
 *width=0; *height=0;

 // init
 m_errorText="OK";
 m_bytesRead=0;

 FILE *fp;
 
 fp=fopen(fileName,"rb");
 if (fp==NULL) {
  CString msg;                    
  msg="Can't open file for reading :\n"+fileName;
  m_errorText=msg;
  return NULL;
 } else {
     long rc;
  rc=fread((BYTE  *)&(m1),1,1,fp); m_bytesRead+=1;
  if (rc==-1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((BYTE  *)&(m2),1,1,fp); m_bytesRead+=1;
  if (rc==-1) m_errorText="Read Error!";
  if ((m1!='B') || (m2!='M')) {
   m_errorText="Not a valid BMP File";
   fclose(fp);
   return NULL;
        }
        
  ////////////////////////////////////////////////////////////////////////////
  //
  // read a ton of header stuff

  rc=fread((long  *)&(filesize),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((int  *)&(res1),2,1,fp); m_bytesRead+=2;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((int  *)&(res2),2,1,fp); m_bytesRead+=2;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(pixoff),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(bmisize),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(inBM.bmWidth),4,1,fp);  m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(inBM.bmHeight),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((int  *)&(inBM.bmPlanes),2,1,fp); m_bytesRead+=2;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((int  *)&(inBM.bmBitsPixel),2,1,fp); m_bytesRead+=2;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(compression),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(sizeimage),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(xscale),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(yscale),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(colors),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  rc=fread((long  *)&(impcol),4,1,fp); m_bytesRead+=4;
  if (rc!=1) {m_errorText="Read Error!"; fclose(fp); return NULL;}

  ////////////////////////////////////////////////////////////////////////////
  // i don't do RLE files

  if (compression!=BI_RGB) {
      m_errorText="This is a compressed file.";
      fclose(fp);
      return NULL;
     }

  if (colors == 0) {
   colors = 1 << inBM.bmBitsPixel;
  }


  ////////////////////////////////////////////////////////////////////////////
  // read colormap

  RGBQUAD *colormap = NULL;

  switch (inBM.bmBitsPixel) {
  case 24:
   break;
   // read pallete 
  case 1:
  case 4:
  case 8:
   colormap = new RGBQUAD[colors];
   if (colormap==NULL) {
    fclose(fp);
    m_errorText="Out of memory";
    return NULL;
   }

   int i;
   for (i=0;i<colors;i++) {
    BYTE r,g,b, dummy;

    rc=fread((BYTE *)&(b),1,1,fp);
    m_bytesRead++;
    if (rc!=1) {
     m_errorText="Read Error!"; 
     delete [] colormap;
     fclose(fp);
     return NULL;
    }

    rc=fread((BYTE  *)&(g),1,1,fp); 
    m_bytesRead++;
    if (rc!=1) {
     m_errorText="Read Error!"; 
     delete [] colormap;
     fclose(fp);
     return NULL;
    }

    rc=fread((BYTE  *)&(r),1,1,fp); 
    m_bytesRead++;
    if (rc!=1) {
     m_errorText="Read Error!"; 
     delete [] colormap;
     fclose(fp);
     return NULL;
    }


    rc=fread((BYTE  *)&(dummy),1,1,fp); 
    m_bytesRead++;
    if (rc!=1) {
     m_errorText="Read Error!"; 
     delete [] colormap;
     fclose(fp);
     return NULL;
    }

    colormap[i].rgbRed=r;
    colormap[i].rgbGreen=g;
    colormap[i].rgbBlue=b;
   }
   break;
  }


  if ((long)m_bytesRead>pixoff) {
   fclose(fp);
   m_errorText="Corrupt palette";
   delete [] colormap;
   fclose(fp);
   return NULL;
  }

  while ((long)m_bytesRead<pixoff) {
   char dummy;
   fread(&dummy,1,1,fp);
   m_bytesRead++;
  }

  int w=inBM.bmWidth;
  int h=inBM.bmHeight;

  // set the output params
  *width=w;
  *height=h;

  long row_size = w * 3;

  long bufsize = (long)w * 3 * (long)h;

  ////////////////////////////////////////////////////////////////////////////
  // alloc our buffer

  outBuf=(BYTE *) new BYTE [bufsize];
  if (outBuf==NULL) {
   m_errorText="Memory alloc Failed";
  } else {

   ////////////////////////////////////////////////////////////////////////////
   // read it

   long row=0;
   long rowOffset=0;

   // read rows in reverse order
   for (row=inBM.bmHeight-1;row>=0;row--) {

    // which row are we working on?
    rowOffset=(long unsigned)row*row_size;           

    if (inBM.bmBitsPixel==24) {

     for (int col=0;col<w;col++) {
      long offset = col * 3;
      char pixel[3];

      if (fread((void  *)(pixel),1,3,fp)==3) {
       // we swap red and blue here
       *(outBuf + rowOffset + offset + 0)=pixel[2];  // r
       *(outBuf + rowOffset + offset + 1)=pixel[1];  // g
       *(outBuf + rowOffset + offset + 2)=pixel[0];  // b
      }

     }

     m_bytesRead+=row_size;
     
     // read DWORD padding
     while ((m_bytesRead-pixoff)&3) {
      char dummy;
      if (fread(&dummy,1,1,fp)!=1) {
       m_errorText="Read Error";
       delete [] outBuf;
       fclose(fp);
       return NULL;
      }

      m_bytesRead++;
     }
 
     
    } else { // 1, 4, or 8 bit image

     ////////////////////////////////////////////////////////////////
     // pixels are packed as 1 , 4 or 8 bit vals. need to unpack them

     int bit_count = 0;
     UINT mask = (1 << inBM.bmBitsPixel) - 1;

     BYTE inbyte=0;

     for (int col=0;col<w;col++) {
      
      int pix=0;

      // if we need another byte
      if (bit_count <= 0) {
       bit_count = 8;
       if (fread(&inbyte,1,1,fp)!=1) {
        m_errorText="Read Error";
        delete [] outBuf;
        delete [] colormap;
        fclose(fp);
        return NULL;
       }
       m_bytesRead++;
      }

      // keep track of where we are in the bytes
      bit_count -= inBM.bmBitsPixel;
      pix = ( inbyte >> bit_count) & mask;

      // lookup the color from the colormap - stuff it in our buffer
      // swap red and blue
      *(outBuf + rowOffset + col * 3 + 2) = colormap[pix].rgbBlue;
      *(outBuf + rowOffset + col * 3 + 1) = colormap[pix].rgbGreen;
      *(outBuf + rowOffset + col * 3 + 0) = colormap[pix].rgbRed;
     }

     // read DWORD padding
     while ((m_bytesRead-pixoff)&3) {
      char dummy;
      if (fread(&dummy,1,1,fp)!=1) {
       m_errorText="Read Error";
       delete [] outBuf;
       if (colormap)
        delete [] colormap;
       fclose(fp);
       return NULL;
      }
      m_bytesRead++;
     }
    }
   }
  
  }

  if (colormap) {
   delete [] colormap;
  }

  fclose(fp);

    }

 return outBuf;
}
//=================================================================================================================

BYTE* CMemFile::Alloc(DWORD nBytes)
{
 return (BYTE*)malloc((UINT)nBytes);
}

BYTE *buf = JpegFile::JpegFileToRGB(....);
delete [] buf;

BYTE * JpegFile::JpegFileToRGB(CString fileName, UINT *width,  UINT *height)
{
 *width=0;
 *height=0;

 BYTE *dataBuf;
 dataBuf=(BYTE *)new BYTE[width * 3 * height];
 if (dataBuf==NULL) {
  return NULL;
 }

 return dataBuf;

}

BYTE * JpegFile::MakeDwordAlignedBuf(BYTE *dataBuf,UINT widthPix,UINT height, UINT *uiOutWidthBytes)
{
 ////////////////////////////////////////////////////////////
 // what's going on here? this certainly means trouble 
 if (dataBuf==NULL)return NULL;

 ////////////////////////////////////////////////////////////
 // how big is the smallest DWORD-aligned buffer that we can use?
 UINT uiWidthBytes;
 uiWidthBytes = WIDTHBYTES(widthPix * 24);

 DWORD dwNewsize=(DWORD)((DWORD)uiWidthBytes * (DWORD)height);
 BYTE *pNew;

 ////////////////////////////////////////////////////////////
 // alloc and open our new buffer
 pNew=(BYTE *)new BYTE[dwNewsize];
 if (pNew==NULL) {
  return NULL;
 }
 
 ////////////////////////////////////////////////////////////
 // copy row-by-row
 UINT uiInWidthBytes = widthPix * 3;
 UINT uiCount;
 for (uiCount=0;uiCount < height;uiCount++) {
  BYTE * bpInAdd;
  BYTE * bpOutAdd;
  ULONG lInOff;
  ULONG lOutOff;

  lInOff=uiInWidthBytes * uiCount;
  lOutOff=uiWidthBytes * uiCount;

  bpInAdd= dataBuf + lInOff;
  bpOutAdd= pNew + lOutOff;

  memcpy(bpOutAdd,bpInAdd,uiInWidthBytes);
 }

 *uiOutWidthBytes=uiWidthBytes;
 return pNew;
}

BOOL JpegFile::VertFlipBuf(BYTE  * inbuf, 
        UINT widthBytes, 
        UINT height)
{   
 BYTE  *tb1;
 BYTE  *tb2;

 if (inbuf==NULL)
  return FALSE;

 UINT bufsize;

 bufsize=widthBytes;

 tb1= (BYTE *)new BYTE[bufsize];
 if (tb1==NULL) {
  return FALSE;
 }

 tb2= (BYTE *)new BYTE [bufsize];
 if (tb2==NULL) {
  delete [] tb1;
  return FALSE;
 }
 
 UINT row_cnt;     
 ULONG off1=0;
 ULONG off2=0;

 for (row_cnt=0;row_cnt<(height+1)/2;row_cnt++) {
  off1=row_cnt*bufsize;
  off2=((height-1)-row_cnt)*bufsize;   
  
  memcpy(tb1,inbuf+off1,bufsize);
  memcpy(tb2,inbuf+off2,bufsize); 
  memcpy(inbuf+off1,tb2,bufsize);
  memcpy(inbuf+off2,tb1,bufsize);
 }

 delete [] tb1;
 delete [] tb2;

 return TRUE;
}       

BOOL JpegFile::MakeGrayScale(BYTE *buf, UINT widthPix, UINT height)
{
 if (buf==NULL)
  return FALSE;

 UINT row,col;
 for (row=0;row<height;row++) {
  for (col=0;col<widthPix;col++) {
   LPBYTE pRed, pGrn, pBlu;
   pRed = buf + row * widthPix * 3 + col * 3;
   pGrn = buf + row * widthPix * 3 + col * 3 + 1;
   pBlu = buf + row * widthPix * 3 + col * 3 + 2;

   // luminance
   int lum = (int)(.299 * (double)(*pRed) + .587 * (double)(*pGrn) + .114 * (double)(*pBlu));

   *pRed = (BYTE)lum;
   *pGrn = (BYTE)lum;
   *pBlu = (BYTE)lum;
  }
 }
 return TRUE;
}

//============================================================================

//--------Bit 구하기- -----------------------------

typedef struct {
 unsigned b0 : 1, b1 : 1, b2 : 1, b3 : 1, b4 : 1, b5 : 1, b6 : 1, b7 : 1;
} byte_bits;

typedef union {
 BYTE bByte;
 byte_bits bit;
} lsByte;


lsByte bUnivIO;

 bUnivIO=(UINT8)250;

#include "Led.h"
CLed m_LedOut0;
DDX_Control(pDX, IDC_LED_OUT0, m_LedOut0);

 m_LedOut0.SetStatus( bUnivIO.bit.b0 );
 m_LedOut1.SetStatus( bUnivIO.bit.b1 );
 m_LedOut2.SetStatus( bUnivIO.bit.b2 );
 m_LedOut3.SetStatus( bUnivIO.bit.b3 );
 m_LedIn0.SetStatus( bUnivIO.bit.b4 );
 m_LedIn1.SetStatus( bUnivIO.bit.b5 );
 m_LedIn2.SetStatus( bUnivIO.bit.b6 );
 m_LedIn3.SetStatus( bUnivIO.bit.b7 );


 
int CUDPSock::SendTo(const void* lpBuf, int nBufLen, LPCTSTR lpszHostAddress, int nFlags)
{
 sockaddr_in Addr;
 memset((char *)&Addr, 0x00, sizeof(Addr));
 Addr.sin_family = AF_INET;
 Addr.sin_addr.s_addr = inet_addr(lpszHostAddress); 
 Addr.sin_port = htons(m_iPort);//서버,클라이언트중 port지정한 UDP port로 송수신(내부서버에지정)

 char *buf = NULL;
 int iSize = lstrlen((char*)lpBuf);

 buf = (char*)malloc(iSize);

 memcpy(buf,lpBuf,iSize);
 
 //CUDPSock::DATAPACKET DataPacket;
 //memcpy(DataPacket.szData, (char*)lpBuf, nBufLen);
 //DataPacket.SetCheck();
 //int iResult = sendto(m_Sock, (char*)&DataPacket, sizeof(CUDPSock::DATAPACKET), nFlags, (const struct sockaddr *)&Addr, sizeof(Addr));
 int iResult = sendto(m_Sock, buf, iSize, nFlags, (const struct sockaddr *)&Addr, sizeof(Addr));
 return 0;
}
//---------------------------------------------------------------------------
        //-----특정 문자 바꾸기 -----------------------------------
 CString PathName.Replace( "\\", "/" );


 //-----확장자 바꾸기---------------------------------------
 CString ChangeFileExt(CString csFile, CString csExe)
 {
 CString str;
 int Index=0;
 char *token;
 char szBuf[1024];
 char temp2[100]; 
 char seps[]   = "\\";
    ////////*** Establish string and get the first token:

 if(csFile.GetLength()>3)printf(szBuf,csFile); else return "";
 CString csGetData="";
 sprintf(szBuf,csFile);
 token = strtok(szBuf,seps);

    while( token != NULL )
    {
       //////*** While there are tokens in "string" 
  sprintf(temp2,"%s",token);
  csGetData=temp2;
       ///////*** Get next token: 
     token = strtok( NULL, seps );
    }

 int index=0;
 if(csGetData.GetLength()>1)index = csGetData.Find("."); else return "";
 CString csData="";
 csData=csGetData.Mid(0,index);// AfxMessageBox(csData);

 str=csData+csExe;
 return str;
 }

 //----------------------------------------------------------
 CString NewFileName;
 char sSource[256]
 //찾고자 하는것, 바꾸고자 하는것을 받는다.
 strcpy( sSource, m_FileNameBefore.operator LPCTSTR() );
 //----------------------------------------------------------

 unsigned char *temp = NULL;
 temp = new unsigned char [Length];

 CString Filename=="C:\\Polaronix\\Back\\Ch01\\*.*";
 //-------------------
 LPSTR temp = Filename.GetBuffer(Filename.GetLength()*2);  //*char
    
 //-------------------
 char temp[50];
 for(i=0; i<50; i++) temp[i]='\0';
 lstrcpy((LPSTR)temp,(LPSTR)Filename.operator const char*());

 //--------------------

 char temp[50];
 int Length =  Filename.GetLength();
   //for(i=0; i<50; i++) temp[i]='\0';
 for(i = 0; i < Length; i++)
 {
     temp[i] = Filename.GetAt(i); 
 }
 temp[i]= '\0';

 AfxMessageBox(temp);

 unsigned char Buf1[]={Data[0]};
 pFrame->m_serial[port-1].Write(Buf1,1);

//-----------------------------------------------------------------------------------
//------숫자 감소--------------------------------------------------------------------
 for (i = 255; i > 0; i--)
//-----------------------------------------------------------------------------------
//--unsigned char-> CString ,  unsigned char-> char----------------------------------
//-----------------------------------------------------------------------------------

 int Length=255;
 unsigned char *temp = NULL;
 temp = new unsigned char [Length];

 char temp2[2]; CString csText;
// m_ccEdit1.GetWindowText((LPSTR)temp,255);

 for(int i=0; i<Length; i++)
 {
  temp2[0]=temp[i]; temp2[1]='\0';
  csText+=(LPSTR)temp2;
 }

 AfxMessageBox(csText);


//-----------------------------------------------------------------------------------
//------숫자 추출--------------------------------------------------------------------

  100자리
  hundred= (int)(Sum/ 100);
  ten= (Sum-(hundred*100))/10;
  one=Sum-((hundred*100)+(ten*10));


  1000자리
  thousand= =(int)(Sum/ 1000);               
  hundred= (int)(Sum-(thousand*1000))/100;
  ten= (Sum-((thousand*1000)+(hundred*100)))/10;
  one=Sum-(int)((thousand*1000)+(hundred*100)+(ten*10));

  10000자리
  tenthousand =(int)(Sum/ 10000);               
  thousand=  (int)(Sum-(tenthousand*10000))/1000;
  hundred= (int)(Sum-((tenthousand*10000)+(thousand*1000)+(hundred*100)))/100;
  ten= (Sum-((tenthousand*10000)+(thousand*1000)+(hundred*100)))/10;
  one=Sum-(int)((tenthousand*10000)+(thousand*1000)+(hundred*100)+(ten*10));


//---char-> CString------------------------------------
 char temp[255];
 for(int i=0; i<255; i++) temp[i]='\0';

 CString csText=(LPSTR)temp;
 AfxMessageBox(csText);

//---------------*.* 삭제 처리-------------------------------------------------*/

  CString Filename="C:\\Polaronix\\Back\\Ch01\\*.*";
  int Length =  Filename.GetLength();
  char temp[50];

  for(i=0; i<50; i++) temp[i]='\0';
  lstrcpy((LPSTR)temp,(LPSTR)Filename.operator const char*());

  SHFILEOPSTRUCT sfo;
  memset(&sfo,0,sizeof(sfo));
  sfo.wFunc = FO_DELETE;
  sfo.fFlags =OFN_SHOWHELP; //메시지 창 뛰우지 않음

  sfo.pFrom=(LPSTR)temp;
  SHFileOperation(&sfo);

/*  for(i = 0; i < 20; i++)
  {
     csTmp.Format("%d",temp[i]);  AfxMessageBox(csTmp);
  }
*/

/*------% 계산------------------------------------------------------------*/
 //-------------------------------------------
 //-------------------------------------------

 0-255 에 대한 100%

 // 수량에 대한 % 계산  x(%)
 // 255 : 100(%) = 25 : x(%)    (25의  %)
 // x(%) = (value/255)*100 
 int value=25;
 float fData=float(value)/255;fData=float(fData*100);if(fData<0)fData=0;     


 // %에 대한 수량 구하기  x(no)
 // 255 : 100(%) = x :10(%)    (10%에 대한 값)
 // x=(10/100)*255 

 //int value=10;
 //float fData=float(value/100);fData=float(fData*255);if(fData<0)fData=0;


 fData=float(fData)/100;fData=float(fData*255);      //Limit값
 fData=Cut(fData); m_threshMin=int(fData); 
 //-------------------------------------------
 //-------------------------------------------
 
 float nData1=0;int nData2=0;

// nData1=nImageTotalSize-(nAddressCount*256);
 nData1=nImageTotalSize-nAddressCount;
 
 nData2=int((nData1/nImageTotalSize)*100);
 nPercent=int(100-nData2);

 
 strText.Format("Image Download: %d/100",nPercent);//Pallete X Size
 SetDlgItemText(IDC_IMAGEDOWNLOADSTATIC_A, strText);
 
 if((nPercent>=0)&&(nPercent<=100))
 m_ccModuleAdownloadProgress.SetPos(nPercent);
/*-----------------------------------------------------------------------*/

BOOL AFXAPI AfxVerifyLicFile(HINSTANCE hInstance, LPCTSTR pszLicFileName,
 LPCOLESTR pszLicFileContents, UINT cch)
{
 // Assume the worst...
 BOOL bVerified = FALSE;

 // Look for license file in same directory as this DLL.
 TCHAR szPathName[_MAX_PATH];
 ::GetModuleFileName(hInstance, szPathName, _MAX_PATH);
 LPTSTR pszFileName = _tcsrchr(szPathName, '\\') + 1;
 lstrcpy(pszFileName, pszLicFileName);

 #ifndef OLE2ANSI
 LPSTR pszKey = NULL;
 #endif
 LPBYTE pbContent = NULL;

 TRY
 {
  // Open file, read content and compare.

  CFile file(szPathName, CFile::modeRead);

  if (cch == -1)
 #ifdef OLE2ANSI
   cch = lstrlen(pszLicFileContents);
 #else
   cch = wcslen(pszLicFileContents);

  pszKey = (char*)_alloca(cch*2 + 1);
  cch = _wcstombsz(pszKey, pszLicFileContents, cch*2 + 1);
 #endif

  if (cch != 0)
  {
   --cch;  // license file won't contain the terminating null char
   pbContent = (BYTE*)_alloca(cch);
   file.Read(pbContent, cch);

 #ifndef OLE2ANSI
   if (memcmp(pszKey, pbContent, (size_t)cch) == 0)
 #else
   if (memcmp(pszLicFileContents, pbContent, (size_t)cch) == 0)
 #endif
    bVerified = TRUE;
  }
 }
 END_TRY

 return bVerified;
}

/*---------------------Hex -> CString------------------------------------------------------*/
void CTestView::OnButton1() 
{
 // TODO: Add your control notification handler code here
 CString csTmp="";
 char hexnum=0x7f; //BYTE hexnum=0x01;

 csTmp=HextoAsctoString(hexnum);
 AfxMessageBox(csTmp);
}

CString CTestView::HextoAsctoString(BYTE hexnum)
{
 CString csTmp="0";
 unsigned char hex[] = { "0123456789ABCDEF" };

 BYTE num;
 BYTE temp[3];

 num=hexnum/16;
 temp[0] = hex[num%16];

 num=hexnum%16;
 temp[1] =hex[num%16];
 
 temp[2] = '\0';
 csTmp=temp;

 return csTmp;
}

/*---------------------CString 한줄씩 얻기        ----------------------------------*/
//-----------------------------------------------------------------------------------

 //----한줄 얻기--------------------------------
 CString csData="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20";

 int MaxRow = MAXROW_TIME+1;
 int MaxCol = MAXCOL_TIME;
 CString csTmp="";

 int nGetCol=1;
 if(nMode==MODE_ONTIME)nGetCol=1;if(nMode==MODE_OFFTIME)nGetCol=2;

 int nListMaxCount=0;CString csGetData[MAXROW_TIME];
 LPTSTR pstr;LPTSTR pstrToken;
 TCHAR seps[] =_T(",");
 pstr=csData.GetBuffer(0);
 pstrToken=_tcstok(pstr,seps);

 while(pstrToken !=NULL)
 {
  if(nListMaxCount<MaxRow){csGetData[nListMaxCount]=pstrToken;AfxMessageBox(csGetData[nListMaxCount],MB_OK);}
  pstrToken=_tcstok(NULL,seps);
  nListMaxCount++;
 }
 csData.ReleaseBuffer(-1);


 //----여러 줄 얻기------------------------------------

// CString str =_T("First\tSecond Third,Fourth\t Fifth");
 CString str =_T("100,200,\n300,45.0\n");
// CString str= m_csTestFileData[0];
 CString csdata="";
 int nListMaxCount=0;
 LPTSTR pstr;
 LPTSTR pstrToken;
// TCHAR seps[] =_T("\t, ");
 TCHAR seps[] =_T("\n");
 
 pstr=str.GetBuffer(0);

 pstrToken=_tcstok(pstr,seps);

 while(pstrToken !=NULL)
 {
 // AfxMessageBox(pstrToken,MB_OK);
  pstrToken=_tcstok(NULL,seps);

   if(pstrToken!=NULL)
   {
     char seps[] = ","; char *token; char string[250];
          ///*** Establish string and get the first token: 
     strcpy( string, pstrToken); token = strtok(string, seps );
     csdata="";csdata=token;
     // Data-0
     AfxMessageBox(csdata);
         
     int nCount=0;
       while( token != NULL )
       {
         token = strtok( NULL, seps );
      csdata="";csdata=token;
      //Data-1
      if(nCount==0) 
      AfxMessageBox(csdata);
      csdata="";csdata=token;//csdata=csdata+"\n";
      //Data-2
      if(nCount==1) 
      AfxMessageBox(csdata);
      nCount++;
       }
     nListMaxCount++;
   }
 }
 str.ReleaseBuffer(-1);
 AfxMessageBox(pstr, MB_OK);


//------------@(0x40) MASK-----------------------------------------------------------------
         //MASK 0100 0000 0x40
  //100  0000 0000  0110 0100  (0100 0000) (0100 0000) (0100 0110) (0100 0100)   @@FD   
  //12300   0011 0000  0000 1100     (0100 0011) (0100 0000) (0100 0000) (0100 1100)   C@@L
//-----------------------------------------------------------------------------------------

/*---------------------일정간격의 Board 번호와 Ch 번호 구하기 ----------------------------------*/

  int nBoardNo=0; 
  int nChNo=0;
  int nMax= CHMAX/12;
  int nChMax=12;
  CString csTmp="";
 
   if(m_nTestSendCh<nChMax){nChNo=m_nTestSendCh;} //0-11 12ch
   else
   {
    for(int i=1; i<nMax; i++)
    {
    nBoardNo=m_nTestSendCh/(12*i);
    if(nBoardNo<12)break;
    }
    nChNo=m_nTestSendCh-(12*nBoardNo);
   }
  
   csTmp.Format("No%d, nBoard%d, Ch%d",m_nTestSendCh,nBoardNo,nChNo);
   AfxMessageBox(csTmp);

   m_nTestSendCh++;



/*----------------------반올림 -----------------------------------------------*/

#define Cut(A)          (float)((long int) (((A)+.05) * 10))/10;
#define Cut2(A)          (float)((long int) (((A)+.5) * 10))/10;


/*----------------------퍼센트 구하기 ----------------------------------------*/
 
 // 100 : 80(환산 기준치)
 // 퍼센트 50 구하기 
 // (50/100)*80
 // (50*0.01)*80

 int nPercent=(m_ccChModel[nCh].m_SCROLLPERCENT*0.01)*m_ccChModel[nCh].m_PALETTE_SIZE_X;

 100퍼센트

 (측정값/기준값)*100
 

/*--------------------------------------------------------------------------------*/

 char temp[80];
 lstrcpy((LPSTR)temp,(LPSTR)pDlg->m_strIp.operator const char*());
 //-------------------------------------------------------------//

 BYTE temp[200];
 CString csText="[0](@@,0B)";
 lstrcpy((LPSTR)temp,(LPSTR)csText.operator const char*());
 //클라이언트에 보낸다.
 m_pClientSock->Send(temp,200);


 CString csText;
 char buff[40];
 csText=((LPCSTR)buff);


 const char Error_message[4][40] = {
 "Comm Data Receive Error      ", 
 "Image Download Error         ", 
 "MPU Control Error            ", 
 "Comm Error        ", 
};


/*---------------------- COleDateTime------------------------*/
 CString csWorkTime;
 COleDateTime ccTestTime;
 ccTestTime=COleDateTime::GetCurrentTime();
 csWorkTime=ccTestTime.Format("%I:%M:%S %p");
     ccTestTime.Format("%Y %m %d %H:%M");
//--
 COleDateTime tmpDateTime = COleDateTime::GetCurrentTime();
 String strTime;

 strTime.Format("%4d.%02d.%02d/%02d:%02d:%02d",
 tmpDateTime.GetYear(), tmpDateTime.GetMonth(),tmpDateTime.GetDay(), 
 tmpDateTime.GetHour(),tmpDateTime.GetMinute(), tmpDateTime.GetSecond());
//--
 CString strTime;
 COleDateTime tmpDateTime = COleDateTime::GetCurrentTime();
 strTime.Format("%4d_%02d_%02d_%02d_%02d_%02d_Err.txt",
 tmpDateTime.GetYear(), tmpDateTime.GetMonth(),tmpDateTime.GetDay(), 
 tmpDateTime.GetHour(),tmpDateTime.GetMinute(), tmpDateTime.GetSecond());
 m_csErrorFileName=strTime;

//-------------------------------------------------------------------------------------------
 int MaxRow = MAXRAW+1;
 int MaxCol = MAXCOL;
 CString cs=""; CString csTmp="";
 int col=3;

 if(m_bSendAllCheck){m_bSendAllCheck=FALSE; cs="OK";}
 else{m_bSendAllCheck=TRUE;cs="-";}
 for (int row = 1; row < MaxRow; row++) {

  csTmp=m_GridCtrl.GetItemText(row, 1);
  if(csTmp!="")
  {
   m_GridCtrl.SetItemFormat(row, col, DT_CENTER|DT_VCENTER|DT_SINGLELINE);
   m_GridCtrl.SetItemText(row, col, cs);
  }
 }
 m_GridCtrl.Invalidate();
//--------------------------------------------------------------------------------------------
BOOL CXYSystemView::FileDataUpdate_RGB_Percent()
{
 __int16   length, exist;
 char   str[200];
 int index=0;
 int nListMaxCount=0;

 FILE   *fp ;
 CString   filename=_T("");
 CString   ReadData=_T("");
 CString   strTmp=_T("");   
 CString data=_T("");
 BOOL   bFileCheck=false;
 BOOL   bFileCheck2=false;

 filename = CSRGBPercentFileName;
 exist = access(filename,0);  

 if (!exist && (fp = fopen(filename,"rt")) != NULL) {
  while (!feof(fp)) {
   ReadData.Empty();
   if ( fgets(str, 200, fp) != NULL) {   // error Return NULL
    ReadData.Format("%s", str);
    length = ReadData.GetLength();

    if(bFileCheck2==false)//처움에만 찾기
    {
    index = ReadData.Find("#SETUP$");
    if(index>=0){bFileCheck=true; index=0; }
    else{AfxMessageBox("Save Data Not Find!"); break;}
    }

    index = ReadData.Find("\t");
    if(index>=0)
    {
    ReadData.Format("%s", ReadData.Mid(0 , length-2));
    }
    else
    {
    ReadData.Format("%s", ReadData.Mid(0 , length-1));
    }
  
    if(ReadData=="#ENDEQ$"){break;}

    if(bFileCheck)
    {
     if(bFileCheck2)
     {
      if(nListMaxCount>=CHMAX){AfxMessageBox("Posion X Save File Error!!");break;}
     
      if(ReadData!="")
      {
      // char seps[]   = " ,\t\n";
       char seps[]   = ",";
       char *token;
       char string[250];
         ////////*** Establish string and get the first token: 
       strcpy( string, ReadData);
         token = strtok(string, seps );
           int nCount=0;
         while( token != NULL )
         {
           ///////*** Get next token: 
          token = strtok( NULL, seps );
        if(nCount==0)
        FRGB_Percent_R[nListMaxCount]=atof(token);
        if(nCount==1)
        FRGB_Percent_G[nListMaxCount]=atof(token);
        if(nCount==2)
        FRGB_Percent_B[nListMaxCount]=atof(token);
        if(nCount==3)
        FRGB_Percent_Gray[nListMaxCount]=atof(token);

        nCount++;
         }
       nListMaxCount++;
      }
     }
    }
       bFileCheck2=true;//처움에만 찾기
   }
  }
 /// fclose(fp);
 } else {
 // SendDlgItemMessage(IDC_STATIC_WLREM, WM_SETTEXT,0,(LPARAM)(LPSTR)"DATA NONE");
 // AfxMessageBox("File Data Not Find! "+CSCHRunTimeFileName); 
  FileDataSave_RGB_Percent();
  return FALSE;
 }
 fclose(fp);return TRUE;
}

//-------------------------------------------------------------------------------------
//-------------------------------------------------------------------------------------
// 화일 디렉토리중 화일명만 추출하기 
//-------------------------------------------------------------------------------------
//-------------------------------------------------------------------------------------
CString  FileNameGet_token(CString csRead)
{
 char *token;
 char szBuf[1024];
 char seps[]   = "\\";
   ////////*** Establish string and get the first token:
 //CString InString="C:\\DMX\\Bmp\\Field_R.bmp";
 CString InString=csRead;
 if(InString.GetLength()==0)return "";
 sprintf(szBuf,InString);
 
 CString csGetData="";
 token = strtok(szBuf,seps);

    char temp2[20]; int Index=0;
    while( token != NULL )
    {
       //////*** While there are tokens in "string" 
  sprintf(temp2,"%s",token);
  csGetData=temp2;
       ///////*** Get next token: 
     token = strtok( NULL, seps );
    }

 int index=0;
 if(csGetData.GetLength()>0)index = csGetData.Find("."); else return "";
 CString csData="";
 csData=csGetData.Mid(0,index); //AfxMessageBox(csData);
 return csData;
}
//---------------------------------------------------------------------------------


/*-------------십진수값  자리분할 각각의 해당 자리수 버퍼에 저장----------------*/

 //------------------------------------------
  if(Sum>0)
   {
    hundred= (int)(Sum/ 100);
    ten= (Sum-(hundred*100))/10;
    one=Sum-((hundred*100)+(ten*10));
   }   
        //------------------------------------------

 int i,Sum,thousand,hundred,ten,one,Count; 
 Sum=thousand=hundred=ten=one=Count=0;
 
 char Rpm[4];
 char RpmBuf[4];

 for(i=0; i<4; i++)
 {
 Rpm[i]=0;
 RpmBuf[i]=0;
 }

 Sum=6234;
 
 for(i=0; i<Sum; i++)
 {   
  Count++;
  if(Count==10)
  {
   Count=0;

   ten++;
   if(ten==10)
   {
    hundred++;
    ten=0;
   
    if(hundred==10)
    {
     thousand++;
     hundred=0;
    }
   } 
  } 
 }
   
 one=Sum-((thousand*1000)+(hundred*100)+(ten*10));
   
 Rpm[0]=thousand;
 Rpm[1]=hundred;
 Rpm[2]=ten;
 Rpm[3]=one;
  
 CString Data;
 Data.Format("%d%d%d%d",Rpm[0],Rpm[1],Rpm[2],Rpm[3]);

 m_TestEdit=Data;

 UpdateData(FALSE);

/*---------------------테스트 모드가 ON 모드만 테스트----------------*/

    CString csTmp1,csTmp2;
    
 csTmp1="#";
     if(ccModel.nMode1==TRUE)
 {
 csTmp1+="1";
 }
 if(ccModel.nMode2==TRUE)
 {
 csTmp1+="2";
 }
 if(ccModel.nMode3==TRUE)
 {
 csTmp1+="3";
 }

 int index = csTmp1.Find("#");//15
 int set[8];

 int Length =  csTmp1.GetLength();

 for(int i=0; i<Length; i++)
 {
 set[i]=atoi(csTmp1.Mid(index+i,1));  
 }

 for(int n=0; n<Length; n++)
 {
  TestMode(set[n]);
 }
 
// csTmp2.Format("%d",set[2]);
// AfxMessageBox(csTmp2);


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 이미지 -  ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/

//------MIL LIBRARY------------------------------------------------//
   MIL_ID MilSystem 
   MIL_ID MilDisplay
   
   MIL_ID MilImage,                         /* Image buffer identifier.*/          
          MilOverlayImage;                  /* Overlay image.          */

 /* Restore the model image and display it */
   MbufRestore(SINGLE_MODEL_IMAGE, MilSystem, &MilImage);
   //------------------------------------------------------
   
  // 윈도우 창 디스플레이 
  ///MdispSelect(MilDisplay, MilImage);
                          
   //Picture Box 상속 디스플레이 
   Handle[0]= ((CWnd*)GetDlgItem(IDC_CAM1))->GetSafeHwnd();
   MdispSelectWindow(MilDisplay, MilImage, Handle[0]);
   //------------------------------------------------------


//------Gray    변경------------------------------------------------//
   float r, g, b, gray;

   r=m_pTestBitmap[ADD1]/255.0f;
   g=m_pTestBitmap[ADD2]/255.0f;
   b=m_pTestBitmap[ADD3]/255.0f;
   RGBToGrayMul(r,g,b,&gray);
   gray= (unsigned char)(gray*255.0);

   //++++++++++++++++++++++++++++
   if(gray > 100)//이미지 검출값
   //++++++++++++++++++++++++++++
   //++++++++++++++++++++++++++++

//----------------------------------------------------------------------------------------
//Image 수평 분할 display
/* CClientDC pDC(this);
 int Add_x,Add_y=0;
 int DivisionRate= PaletteSize_y*5;

 if(m_bPaletteChange)
 {
  for(y=0; y<PaletteSize_y+8; y++)
  {
   for(x=0; x<PaletteSize_x+8; x++)
   { 
  // pDC.SetPixel(x+BMP_START_EDGE_X1-10,y+BMP_START_EDGE_Y1-10,RGB(122,123,102)); 
   pDC.SetPixel(x+BMP_START_EDGE_X1-4,y+BMP_START_EDGE_Y1-4,RGB(122,123,102)); 
   }
  }
  m_bPaletteChange=FALSE;
 }
 else
 {
  for(y=0; y<PaletteSize_y*ImageMaxNo; y++)
  {
  for(x=0; x<PaletteSize_x; x++)
  { 
   if(y<DivisionRate)
   {
   pDC.SetPixel(x+BMP_START_EDGE_X1,y+BMP_START_EDGE_Y1,RGB(255,255,255));
   }
   else
   {  
   Add_x= PaletteSize_x*(y/DivisionRate)+(y/DivisionRate)*10;
   Add_y=DivisionRate*(y/DivisionRate);
   
   pDC.SetPixel((x+BMP_START_EDGE_X1)+Add_x,(y+BMP_START_EDGE_Y1)-Add_y,RGB(255,255,255));
   }
  }  
  }
 }

 //Image를 다섯개씩 분할 수평으로 디스플레이 
 for(y=0; y<PaletteSize_y*ImageMaxNo; y++)
 {
  for(x=0; x<PaletteSize_x; x++)
  { 
   if(y<DivisionRate)
   {
   pDC.SetPixel(x+BMP_START_EDGE_X1,y+BMP_START_EDGE_Y1,RGB(m_DisplayImg_A[(y*WidthLineSize)+(3*x)+2],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+1],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+0]));
   }
   else
   {  
   Add_x= PaletteSize_x*(y/DivisionRate)+(y/DivisionRate)*10;
   Add_y=DivisionRate*(y/DivisionRate);
   
   pDC.SetPixel((x+BMP_START_EDGE_X1)+Add_x,(y+BMP_START_EDGE_Y1)-Add_y,RGB(m_DisplayImg_A[(y*WidthLineSize)+(3*x)+2],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+1],m_DisplayImg_A[(y*WidthLineSize)+(3*x)+0]));
   }
  }  
 }
//-------------------------------------------------------------------------------------------------
*/
/*
//-----------------------------------------------------------------------------------
//Binary File Save
//----------------------------------------------
// R  G  B    3Byte를 2Byte로 변환   
// 00000000  00000000
// 11111                R -5비트  32     256/8 
//      111  111        G -6비트  64     256/4
//              11111   B -5비트  32     256/8
//----------------------------------------------
 //(128x(96*ImageNo))*2   한 픽셀 표현 2바이트 ,이미지 저장할 파일 사이즈
 int ImageFileSize=(PaletteSize_x*(PaletteSize_y*ImageMaxNo)*2);

 unsigned char *BinOutImg;
 BinOutImg = NULL;     //변경전 Image file size
 BinOutImg   = new unsigned char [3*WidthLineSize*(PaletteSize_y*ImageMaxNo)];

 index=0; n=0;

 for(y=0; y<PaletteSize_y*ImageMaxNo; y++)
 {
  for(x=0; x<PaletteSize_x; x++)
  { 
   index=n*2;
   BinOutImg[index+0]=(((OutImg[(y*WidthLineSize)+(3*x)+2])/8)<<3)|(((OutImg[(y*WidthLineSize)+(3*x)+1])/4)>>3);
   BinOutImg[index+1]=(((OutImg[(y*WidthLineSize)+(3*x)+1])/4)<<5)|(((OutImg[(y*WidthLineSize)+(3*x)+0])/8)); 
   n++;
  }
 }
 FILE *outfile;
 CString csImageFile;

 csImageFile.Format("C:\\ModuleAging\\Bin\\%d.bin",PaletteSize_x);
 outfile = fopen(csImageFile,"wb");

 fwrite(BinOutImg,sizeof(char),ImageFileSize,outfile); 
 fclose(outfile);

 if(BinOutImg) delete []BinOutImg;
//----------------------------------------------------------------------------------- 
 //BMP File Save
 unsigned char *BmpOutImg=NULL;
 BmpOutImg = new unsigned char [(PaletteSize_y*ImageMaxNo)*(PaletteSize_x*24)*3];

 for(y=0; y<PaletteSize_y*ImageMaxNo; y++) //BMP 화일로 저장 하기위해 거꾸로 저장
 {
  y2=((PaletteSize_y*ImageMaxNo)-y);//-1 중요(최종 한줄 표현)
  for(x=0; x<PaletteSize_x; x++)
  { 
   BmpOutImg[(y2*WidthLineSize)+(3*x)+2]=OutImg[(y*WidthLineSize)+(3*x)+2];
   BmpOutImg[(y2*WidthLineSize)+(3*x)+1]=OutImg[(y*WidthLineSize)+(3*x)+1];
   BmpOutImg[(y2*WidthLineSize)+(3*x)+0]=OutImg[(y*WidthLineSize)+(3*x)+0];
  }
 }

 DWORD dwBitsSize = sizeof(BITMAPINFOHEADER)+sizeof(RGBQUAD)*256+WidthLineSize*PaletteSize_y*sizeof(char); 
 
 dibHi.biWidth=PaletteSize_x;
 dibHi.biHeight=PaletteSize_y*ImageMaxNo;
 dibHi.biBitCount =24;
 dibHi.biSizeImage = 3*WidthLineSize*(PaletteSize_y*ImageMaxNo);
 dibHi.biClrUsed = dibHi.biClrImportant =0;
 
 dibHf.bfType=0x4D42; 
 dibHf.bfSize = dwBitsSize+sizeof(BITMAPFILEHEADER); // 전체파일 크기 
 if(dibHi.biBitCount==24) dibHf.bfSize -= sizeof(RGBQUAD)*256; // no pallette 
 dibHf.bfOffBits = dibHf.bfSize - WidthLineSize*PaletteSize_y*sizeof(char); 
 dibHf.bfReserved1=dibHf.bfReserved2=0;

 FILE *outfile2;
 csImageFile.Format("C:\\ModuleAging\\EquipSys\\%d.bmp",PaletteSize_x);
 outfile2 = fopen(csImageFile,"wb");

 fwrite(&dibHf,sizeof(char),sizeof(BITMAPFILEHEADER),outfile2);
 fwrite(&dibHi,sizeof(char),sizeof(BITMAPINFOHEADER),outfile2);
 fwrite(BmpOutImg,sizeof(char),3*WidthLineSize*dibHi.biHeight,outfile2); 
 fclose(outfile2);
 if(BmpOutImg) delete []BmpOutImg;
*/


/*--------------------------------------------------------------------------------------*/
//////////////////////////////////////////////////////////////////////////////////////////
///////////////////////////// - 그래픽 -  ////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
/*--------------------------------------------------------------------------------------*/


CDC memDC;
CBitmap memBmp,*pOldBmp;
memDC.CreateCompatibleDC( &dc );
memBmp.CreateCompatibleBitmap( &dc,m_rectWindow.Width(),m_rectWindow.Height() );
pOldBmp = (CBitmap*)memDC.SelectObject( &memBmp );

if( memDC.GetSafeHdc() != NULL )

{   // memDC에 그린다..

    memDC.BitBlt( 0,0,m_rectWindow.Width(),m_rectWindow.Height(),&m_memBackDC, 0,0,SRCCOPY );   // 그리기
    memDC.BitBlt( 
    dc.BitBlt( 0,0, nWidth, nHeight, &memDC, 0, 0, SRCCOPY );   // Main DC에 옮겨 쓰기
}

memDC.SelectObject( pOldBmp );

//######################
http://www.ucancode.net
//######################

//-------------------------------------------------------------------
BOOL Ellipse(int x1, int y1, int x2, int y2);

//-------------------------------------------------------------------
BOOL RoundRect(int x1, int y1, int x2, int y2, int x3, int y3);
BOOL RoundRect(PCRECT lpRect, POINT point);
When this member function executes, the rectangle is drawn from the (x1, y1) to the (x2, y2) points. The corners are rounded by an ellipse whose width would be x3 and the ellipse's height would be x3. 
//-------------------------------------------------------------------
BOOL Pie(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4);
BOOL Pie(LPCRECT lpRect, POINT ptStart, POINT ptEnd);
The (x1, y1) point determines the upper-left corner of the rectangle in which the ellipse that represents the pie fits. The (x2, y2) point is the bottom-right corner of the rectangle. These two points can also be combined in a RECT or a CRect variable and passed as the lpRect value.

The (x3, y3) point, that can also supplied as a POINT or CPoint for lpStart argument, specifies the starting corner of the pie in a default counterclockwise direction.

The (x4, y4) point, or ptEnd argument, species the end point of the pie.

To complete the pie, a line is drawn from (x3, y3) to the center and from the center to the (x4, y4) points.
//-------------------------------------------------------------------

To draw an arc, you can use the CDC::Arc() method whose syntax is:

BOOL Arc(int x1, int y1, int x2, int y2,
 int x3, int y3, int x4, int y4);
Besides the left (x1, y1) and the right (x2, y2) borders of the rectangle in which the arc would fit, an arc must specify where it starts and where it ends. These additional points are set as the (x3, y3) and (x4, y4) points of the figure. Based on this, the above arc can be illustrated as follows:
//-------------------------------------------------------------------
This method uses the same arguments as Arc(). The difference is that while Arc() starts drawing at (x3, y3), ArcTo() does not inherently control the drawing starting point. It refers to the current point, exactly like the LineTo() (and the PolylineTo()) method. Therefore, if you want to specify where the drawing should start, can call CDC::MoveTo() before ArcTo(). Here is an example:

void CExoView::OnDraw(CDC* pDC)
{
 CRect Recto(20, 20, 226, 144);
 CPoint Pt1(202, 115);
 CPoint Pt2(105, 32);

 pDC->MoveTo(207, 155);
 pDC->ArcTo(Recto, Pt1, Pt2);
}
 
//------------------------------------------------------------------------
You may wonder why the arc is drawn to the right side of a vertical line that would cross the center of the ellipse instead of the left. This is because the drawing of an arc is performed from right to left or from bottom to up, in the opposite direction of the clock. This is known as the counterclockwise direction. To control this orientation, the CDC class is equipped with the SetArcDirection() method. Its syntax is:

int SetArcDirection(int nArcDirection);
This method specifies the direction the Arc() method should follow from the starting to the end points. The argument passed as nArcDirection controls this orientation. It can have the following values:

  Value Orientation 
  AD_CLOCKWISE The figure is drawn clockwise 
  AD_COUNTERCLOCKWISE The figure is drawn counterclockwise

The default value of the direction is AD_COUNTERCLOCKWISE. Therefore, this would be used if you do not specify a direction. Here is an example that uses the same values as above with a different orientation:

void CExoView::OnDraw(CDC* pDC)
{
 pDC->SetArcDirection(AD_CLOCKWISE);

 pDC->Arc(20, 20, 226, 144, 202, 115, 105, 32);
}
//------------------------------------------------------------------------ 
You can (also) draw an arc using the CDC::AngleArc() method. Its syntax is:

BOOL AngleArc(int x, int y, int nRadius, float fStartAngle, float fSweepAngle);
This member function draws a line and an arc connected. The arc is based on a circle and not an ellipse. This implies that the arc fits inside a square and not a rectangle. The circle that would be the base of the arc is defined by its center located at C(x, y) with a radius of nRadius. The arc starts at an angle of fStartAngle. The angle is based on the x axis and must be positive. That is, it must range from 0° to 360°. If you want to specify an angle that is below the x axis, such as -15°, use 360º-15°=345°. The last argument, fSweepAngle, is the angular area covered by the arc.

The AngleArc() method does not control where it starts drawing. This means that it starts at the origin, unless a previous call to MoveTo() specified the beginning of the drawing.

Here is an example:

void CExoView::OnDraw(CDC* pDC)
{
 pDC->MoveTo(52, 28);
 pDC->AngleArc(120, 45, 142, 345, -65);
}


//------십자선 그리기------------------------------------------------//
 CClientDC pDC(this);
 int CenterX=349;int CenterY=298;
 int LineSizeX=0; int LineSizeY=0;

 LineSizeX=340;
 LineSizeY=260;

 CPen penRectBlack(PS_SOLID,1,RGB(0,0,255));
 CPen *pOldPen;
  
 pDC.SelectObject(&penRectBlack);
 pOldPen = pDC.SelectObject(&penRectBlack);

 pDC.MoveTo(CenterX,CenterY-LineSizeY);
 pDC.LineTo(CenterX,CenterY+LineSizeY);

 pDC.MoveTo(CenterX-LineSizeX,CenterY);
 pDC.LineTo(CenterX+LineSizeX,CenterY);

 pDC.SelectObject(pOldPen);
 penRectBlack.DeleteObject();
}

//------------------------------------------------------------------------ 

//------삼각형 그리기------------------------------------------------//
 //CDraw1Doc* pDoc = GetDocument();
 //ASSERT_VALID(pDoc);

 CBrush NewBrush(RGB(255, 2, 5));
 CBrush *pBrush;
 
 CPoint Pt[3];

 CDC *pDC = GetDC();

 // Top Triangle
 Pt[0] = CPoint(125,  10);
 Pt[1] = CPoint( 95,  70);
 Pt[2] = CPoint(155,  70);

 pBrush = pDC->SelectObject(&NewBrush);
 pDC->Polygon(Pt, 3);

 // Left Triangle
 Pt[0] = CPoint( 80,  80);
 Pt[1] = CPoint( 20, 110);
 Pt[2] = CPoint( 80, 140);

 pDC->Polygon(Pt, 3);

 // Bottom Triangle
 Pt[0] = CPoint( 95, 155);
 Pt[1] = CPoint(125, 215);
 Pt[2] = CPoint(155, 155);
 
 pDC->Polygon(Pt, 3);

 // Right Triangle
 Pt[0] = CPoint(170,  80);
 Pt[1] = CPoint(170, 140);
 Pt[2] = CPoint(230, 110);

 pDC->Polygon(Pt, 3);

 pDC->SelectObject(pBrush);

//------사각그리기------------------------------------------------//
 CPen penRectBlack(PS_SOLID,1,RGB(255,0,0));
 pDC->SelectObject(&penRectBlack);
 pDC->MoveTo(m_MatchPos.left,m_MatchPos.top);
 pDC->LineTo(m_MatchPos.right,m_MatchPos.top);
 pDC->LineTo(m_MatchPos.right,m_MatchPos.bottom);
 pDC->LineTo(m_MatchPos.left,m_MatchPos.bottom);
 pDC->LineTo(m_MatchPos.left,m_MatchPos.top);


//------Text 출력------------------------------------------------//
 CFont *Font,*oldFont;
 Font=new CFont;

 LOGFONT logFont; int nFontHight=25;
 logFont.lfStrikeOut=FALSE;//가운데 선긋기
 logFont.lfItalic=TRUE;logFont.lfUnderline=FALSE;
 logFont.lfEscapement= 0;logFont.lfHeight=nFontHight;
 logFont.lfCharSet=HANGEUL_CHARSET;//ANSI_CHARSET;

// Font->CreatePointFont(240,_T("굴림"));
// Font->GetLogFont(&logFont);
 Font->CreateFontIndirect(&logFont);
 oldFont=dc.SelectObject(Font);

 dc.SetBkMode(TRANSPARENT);//dc.SetTextCharacterExtra(2);//행간격
 dc.SetTextColor(RGB(255,0,0));//dc.SetBkColor(RGB(255,0,0));
 //---------------------------------------------
 nTextLine_x=SpotRect.left;//+((SpotRect.right-SpotRect.left)/2);
 nTextLine_y=AddBottom+MAINDIS_START_Y-58-8;
 dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_x);//x,가로 치수 텍스트

 dc.SelectObject(oldFont);delete Font;

 Font=new CFont;
 logFont.lfEscapement= -900;logFont.lfHeight=nFontHight;
 Font->CreateFontIndirect(&logFont);
 oldFont=dc.SelectObject(Font);

 nTextLine_x=SpotRect.right+16;nTextLine_y=AddBottom+MAINDIS_START_Y-25;
 dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_y);//y,세로 치수 텍스트
// CRect rect;
// rect.left=nTextLine_x; rect.right=nTextLine_x+30;
// rect.top=nTextLine_y-15;rect.bottom=nTextLine_y+30;
/// dc.DrawText(csLineSize_y,&rect,DT_SINGLELINE|DT_CENTER|DT_VCENTER);//y,세로 치수 텍스트
 //---------------------------------------------

 dc.SelectObject(oldFont);delete Font;
 //dc.SelectObject(oldFont);Font.DeleteObject();
 dc.SelectObject(pOldPen);NewPen.DeleteObject();

/*-------------------------------------------------------------------
 CFont Font,*oldFont;
 LOGFONT logFont;

 int m_nFontSize=14;
 CString m_strFont="바탕체";
 Font.CreateFont(m_nFontSize,m_nFontSize,-900,0,FW_DONTCARE,FALSE,
      FALSE,FALSE,DEFAULT_CHARSET,OUT_DEFAULT_PRECIS,
      CLIP_DEFAULT_PRECIS,DEFAULT_QUALITY,DEFAULT_PITCH,
      m_strFont);

 oldFont=dc.SelectObject(&Font);
 dc.SetBkMode(TRANSPARENT);//dc.SetTextCharacterExtra(2);//행간격
 dc.SetTextColor(RGB(255,0,0));//dc.SetBkColor(RGB(255,0,0));
 //---------------------------------------------
 nTextLine_x=SpotRect.left;//+((SpotRect.right-SpotRect.left)/2);
 nTextLine_y=AddBottom+MAINDIS_START_Y-60;
 dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_x);//x,가로 치수 텍스트
 dc.SelectObject(oldFont);Font.DeleteObject();

 nTextLine_x=SpotRect.right+6;nTextLine_y=AddBottom+MAINDIS_START_Y-20;
// dc.TextOut(nTextLine_x,nTextLine_y-15,csLineSize_y);//y,세로 치수 텍스트
 CRect rect;
 rect.left=nTextLine_x; rect.right=nTextLine_x+30;
 rect.top=nTextLine_y-15;rect.bottom=nTextLine_y+30;

 dc.DrawText(csLineSize_y,&rect,DT_SINGLELINE|DT_CENTER|DT_VCENTER);//y,세로 치수 텍스트
 //---------------------------------------------

 dc.SelectObject(oldFont);Font.DeleteObject();
 dc.SelectObject(pOldPen);NewPen.DeleteObject();


/*--------------------사인파그래프---------------------------*/

 for (f=-500;f<2000;f++) {
 y=(int)(sin(f*3.14/180)*100);
 SetPixel(hdc, (int)f, y,RGB(0,0,0));
 }
/*--------------------그래프--------------------------------*/
void CGrapeDlg::OnPaint() 
{
 CPaintDC dc(this); // device context for painting
 
 // TODO: Add your message handler code here
  for(int i=0; i<3; i++)
 {
  GrapeDrawEX(i);
 }
 // Do not call CDialog::OnPaint() for painting messages
}

void CGrapeDlg::GrapeDrawEX(int SetNo)
{
 CClientDC dc(this);

 int xStartPoint;
 int yStartPoint;
 COLORREF GrapeLineColor;

 if(SetNo==0)
 { 
  xStartPoint=32;
  yStartPoint=150;
  GrapeLineColor= RGB(0,250,250);
 }
 else if(SetNo==1)
 { 
 xStartPoint=32;
 yStartPoint=350;
 GrapeLineColor= RGB(0,250,0);
 }
 else if(SetNo==2)
 { 
 xStartPoint=32;
 yStartPoint=550;
 GrapeLineColor= RGB(0,0,250);
 }
 int xExpand=22;/*x시간확장 11 or 22*/
 int yExpand=(40/2)+(40/2);/*y온도 범위확장 20 or 40*/
 int xLimit=40;/*y_pixel 나누기 단위 20 or 40*/
 int yLimit=40/2; /*x_pixel 나누기 단위* 20 or 40*/
 int yTatalNo=200/2; /*100 or 200 select*/

 int xwidth=960;/*480 or 960*/
 int yhigh=200/2;/*100 or 200*/
 int width=xwidth+xStartPoint+xExpand; //width,high
 int high=yhigh+yStartPoint+yExpand;

 int ThermoBufX[24];
 int ThermoBuf[24];
 ThermoBuf[0]=20;
 ThermoBuf[1]=30;
 ThermoBuf[2]=40;
 ThermoBuf[3]=45;
 ThermoBuf[4]=50;
 ThermoBuf[5]=40;
 ThermoBuf[6]=40;
 ThermoBuf[7]=50;
 ThermoBuf[8]=50;
 ThermoBuf[9]=55;
 ThermoBuf[10]=60;
 ThermoBuf[11]=70;
 ThermoBuf[12]=80;
 ThermoBuf[13]=90;
 ThermoBuf[14]=100;
 ThermoBuf[15]=105;
 ThermoBuf[16]=104;
 ThermoBuf[17]=100;
 ThermoBuf[18]=97;
 ThermoBuf[19]=98;
 ThermoBuf[20]=100;
 ThermoBuf[21]=101;
 ThermoBuf[22]=100;
 ThermoBuf[23]=100;
/*---------------Backgndbrush---------*/
 COLORREF m_BackgndBrush= RGB(0,0,0);
 CBrush brush(m_BackgndBrush),*pOldBrush;
 pOldBrush = (CBrush *)dc.SelectObject(&brush);
 dc.Rectangle(xStartPoint,yStartPoint,width,high);
/*---------------BaseTime/Thermo_brush---------*/
 COLORREF m_BaseTimebrush= RGB(250,250,250);
 CBrush brush2(m_BaseTimebrush);
 dc.SelectObject(&brush2);
 dc.Rectangle(xStartPoint-27,high,width+2,high+20);/*time*/
 dc.Rectangle(xStartPoint-27,yStartPoint,xStartPoint,high+20);/*thermo*/

/*---------------단위pixel-------------*/
 for(int i=xStartPoint; i<width; i+=xLimit)
 {
  for(int n=yStartPoint; n<high; n+=yLimit)
  {
  dc.SetPixel(i,n,RGB(0,250,250));
  }
 }
/*----------------전체 테두리-중간 Rect1-----------------*/
 CPen penRectBlue1(PS_SOLID,2,RGB(50,0,250)),*pOldPen;
 pOldPen = dc.SelectObject(&penRectBlue1);
 dc.MoveTo(xStartPoint-27,yStartPoint);
 dc.LineTo(width,yStartPoint);
 dc.LineTo(width,high+20);
 dc.LineTo(xStartPoint-27,high+20);
 dc.LineTo(xStartPoint-27,yStartPoint);
/*---------------전체 테두리-안쪽-------------------*/
 CPen penRectYello2(PS_SOLID,2,RGB(250,250,0));
 dc.SelectObject(&penRectYello2);
 dc.MoveTo(xStartPoint+4,yStartPoint+4);
 dc.LineTo(width-4,yStartPoint+4);
 dc.LineTo(width-4,high-4);
 dc.LineTo(xStartPoint+4,high-4);
 dc.LineTo(xStartPoint+4,yStartPoint+4);

/*---------------전체 테두리-바깥  Rect3-------------------*/
 CPen penRectBlack(PS_SOLID,4,RGB(0,250,250));
 dc.SelectObject(&penRectBlack);
 dc.MoveTo(xStartPoint-3-27,yStartPoint-3);
 dc.LineTo(width+3,yStartPoint-3);
 dc.LineTo(width+3,high+20+3);
 dc.LineTo(xStartPoint-3-27,high+20+3);
 dc.LineTo(xStartPoint-3-27,yStartPoint-3);
/*---------------온도 기준 line-------------------*/
 CPen penRectBlack2(PS_SOLID,2,RGB(0,0,0));
 dc.SelectObject(&penRectBlack2);
 dc.MoveTo(xStartPoint-26,high);
 dc.LineTo(xStartPoint,high);
/*---------------각시간 지시선 ----------------------*/
 CPen penWhite(PS_SOLID,2,RGB(250,250,250));
 dc.SelectObject(&penWhite);

 for(int n2=xStartPoint+xLimit; n2<width; n2+=xLimit)
 {
 dc.MoveTo(n2,high-6);
 dc.LineTo(n2,high-16);
 }
/*---------------각온도 지시선-----------------------*/
 for(int n3=yStartPoint+yLimit; n3<high; n3+=yLimit)
 {
 dc.MoveTo(xStartPoint+6,n3);
 dc.LineTo(xStartPoint+16,n3);
 }
/*--------------x_BaseTime출력Text---------------*/
 CString TimeText;
 int time=0;
// ModifyStyleEx(0,WS_BORDER,SWP_DRAWFRAME);
 dc.SetBkMode(TRANSPARENT);
 dc.SetTextColor(RGB(50,0,0));
 for(int a2=xStartPoint+xLimit; a2<width; a2+=xLimit)
 {
  time++;
  TimeText.Format("%d",time);
  dc.TextOut(a2-6,high+3,TimeText); 
 }
 dc.SetTextColor(RGB(250,0,0));
 dc.TextOut(xStartPoint-25,yStartPoint-24,"( 'C )"); 
 dc.SetTextColor(RGB(0,0,250));
 dc.TextOut(xStartPoint+36,high+26,"TIME- - -"); 
/*----------------y_Base온도Text--------------------*/
 CString ThermoText;
 for(int a3=yStartPoint+yLimit; a3<high; a3+=yLimit)
 {
  if(yhigh==100)
  {
  ThermoText.Format("%d",yTatalNo-((a3-yLimit)-yStartPoint)+yLimit);
  dc.TextOut(xStartPoint-24,a3-8,ThermoText); 
  }
  else if(yhigh==200)
  {
  ThermoText.Format("%d",(yTatalNo-((a3-yLimit)-yStartPoint)+yLimit)/2);
  dc.TextOut(xStartPoint-24,a3-8,ThermoText); 
  }
 }
/*------------온도 point 꼭지점 ----------*/  
 int count1=0;
 int xMove=3;
 int point_x=6;
 int point_y=6;
 CPen penWhite2(PS_SOLID,4,RGB(250,0,50));
 dc.SelectObject(&penWhite2);

 for(int c=xStartPoint+xLimit; c<width; c+=xLimit)
 {
  ThermoBufX[count1]=c;
  count1++;
 }
 for(int c2=0; c2<24; c2++)
 {
  if(yTatalNo==100)
  {
  dc.Ellipse(ThermoBufX[c2]-xMove,(yTatalNo-ThermoBuf[c2])+yStartPoint+yExpand,ThermoBufX[c2]+point_x-xMove,(yTatalNo-ThermoBuf[c2])+yStartPoint+yExpand+point_y);
  }
  else if(yTatalNo==200)
  {
  dc.Ellipse(ThermoBufX[c2]-xMove,((yTatalNo/2)-ThermoBuf[c2])*2+yStartPoint+yExpand,ThermoBufX[c2]+point_x-xMove,((yTatalNo/2)-ThermoBuf[c2])*2+yStartPoint+yExpand+point_y);
  }
 }
/*-------------온도 그래프 실선--------*/
int count2=0;
int GrapeStartPoint=yhigh+yStartPoint+yExpand-4;
 CPen penGrapeRed(PS_SOLID,1,GrapeLineColor);
 dc.SelectObject(&penGrapeRed);
 dc.MoveTo(xStartPoint+4,GrapeStartPoint);

 for(int d=xStartPoint+xLimit; d<width; d+=xLimit)
 {
  ThermoBufX[count2]=d;
  count2++;
 }
 for(int d2=0; d2<24; d2++)
  {
   if(yTatalNo==100)
   {
   dc.LineTo(ThermoBufX[d2],(yTatalNo-ThermoBuf[d2])+yStartPoint+yExpand+3);
   }
   else if(yTatalNo==200)
   {
   dc.LineTo(ThermoBufX[d2],((yTatalNo/2)-ThermoBuf[d2])*2+yStartPoint+yExpand+3);
   }
  }
/*--------------온도출력 Text---------------*/
// ModifyStyleEx(WS_BORDER,0,SWP_DRAWFRAME);
 CString TextData;
 dc.SetBkMode(TRANSPARENT);
 dc.SetTextColor(RGB(250,250,250));

 for(int a=0; a<24; a++)
 {
  TextData.Format("%d",ThermoBuf[a]);
  if(yTatalNo==100)
  {
  dc.TextOut(ThermoBufX[a]-6,(yTatalNo-ThermoBuf[a])+yStartPoint+yExpand-20,TextData); 
  }
  else if(yTatalNo==200)
  {
  dc.TextOut(ThermoBufX[a]-6,((yTatalNo/2)-ThermoBuf[a])*2+yStartPoint+yExpand-20,TextData); 
  }
 } 
/*-----------------------------------------------*/
 dc.SelectObject(pOldBrush);
 dc.SelectObject(pOldPen);
/*------------------------------------------------*


이번주(7/2 ~ 7/6)는 서울로 통근하면서 교육 중이다. 누군가는 여관잡고 자라고 하지만, 난 그게 별로다..

멀어도 집으로 가는게 좋으니까..

아침 6시에 나와서 서울오면 한 8시쯤.. 7시쯤 나올까도 하는데, 그때 나오면 지각할 것 같고..

 

좌우지간 c# 교육을 듣고 있는데, 어제까지는 그나마 초기부분 이라서 그런지 어렵지는 않은 듯 싶다.

오늘부터 아마 어렵고 바빠지겠지..

 

그런데, 배우는 내용이 기초라서 응용 부분은 회사로 복귀해서 해야만 할 듯 하다.

여기는 콘솔위주이고.. 회사에서는 GUI 위주니까..

 

장비업계로 와서 계속 교육의 연속인듯 하다.

아마 프로필에 교육 필증이 계속 늘어날 듯 하다. 근데, 내가 받은 교육들 내가 다 이해했었나?

 

이번 교육은 다 이해하도록 해 봐야겠다.

+ Recent posts

티스토리 툴바